Used Processing in Portugal

STEEL CONVEYOR WITH FEED HOPPER

Steel Conveyor with Feed Hopper for moving heavy loads. The Feed Hopper allows the accumulation of materials at intake and optimises the process. Manufactured in highly resistant materials.

Linear Electromagnetic Glass Cutting Line - VCEL Atlantibalada

• Manufacturer: Atlantibalada

The glass cutting line driven by linear electromagnetic motor is used for cutting flat, molded or soft-coated (Low-E) glass. Cutting operations are done with diamond cutter. The automatic glass loading robot can ...

Laminated Glass Cutting Line - LVC Atlantibalada

• Manufacturer: Atlantibalada

The laminated glass cutting line is used to cut laminated glass plates to the desired length. The loading of the laminated glass to be cut is done with the help of a table, with a tilting and lifting feature. Aft...

Lemorau CTA 1500

• Manufacturer: LEmorau

Lemorau CTA 1500 is an automatic core cutter machine. Its function is cutting cores in a desired measure over its total length and in a selected quantity. Built with heavy-duty components to exact specifications,...

Lemorau EBRM+

• Manufacturer: LEmorau

Lemorau EBRM + is an affordable table top digital finishing machine that can coat, die cut, slit and rewind digital printed webs. Due to an electronic feeder roll, the machine can be used as in-line finishing mac...

Ultrasonic cleaning machine for particle filters / collectors

Ideal machine for cleaning particulate filters and collectors.

Air Dryer PS 43 - 4300l/min

Fine Oil Separator Filter - HM 72

• Manufacturer: Cetrus

HM filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after the QM and PM filters. This is a filter very similar to the PM series, differing only in the degree of filtration. This fi...

Fine Oil Separator Filter - HM 34

• Manufacturer: Cetrus

HM filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after the QM and PM filters. This is a filter very similar to the PM series, differing only in the degree of filtration. This fi...

Fine Oil Separator Filter - HM 18

• Manufacturer: Cetrus

HM filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after the QM and PM filters. This is a filter very similar to the PM series, differing only in the degree of filtration. This fi...

Oil Separator Filter - PM 30

• Manufacturer: Cetrus

PM Filter - filtration grade 1 micron + residual oil 0.5 mg/m 3 To install after the drier or QM filters. This filter, following the principles of shear and coalescence, forces the particles of the oily fluid to ...

ECK TWIN 12

The complete station for R134a and HFO1234yf The Ecotechics ECK TWIN 12 is the renewed expression of the functional and technological capabilities of the Ecotechnics brand. Two machines in one is a simple, fast a...

Set of 14 endothermic panels 36kW

• Manufacturer: Cetrus

Composition:- Dimension of each REAR panel (mm): 2400x730x39 - Size of each SIDE panel (mm): 2400x730x39 - Size of each TOP panel (mm): 2400x290x39 - High-rigidity aluminum frames with chamfered edges and protect...

Set of 4 endothermic panels 4.4kW

• Manufacturer: Cetrus

Pre-filter QM 72

QM Pre-Filter - Micron Grade 5 Should always be installed before the dryer. A long service life combined with excellent heat resistance to heat and abrasion makes it ideal means of initial protection of a compres...