Used Processing in Japan

2001 SMTHE HFM-5 · HFM-10
- used
- Manufacturer: SMT
HFM-5 Motor: 1.5kw Throughput: 3-5L/batch Rotation speed: 8000rpm(MAX) HFM-10 Motor: 2.2kw Processing volume: 5-10L/batch Rotation speed: 15000rpm(MAX) φ80 6 blades, sealed jacketed vessel
Hiroshima, Japan
2013 Front Industry TF-3012
- used
- Manufacturer: Front Industry
Reference processing capacity: 230Kg/h. Hopper: 60L (SUS304). Forming roll: φ300 x W100 (SUS404C). First granulator: Oscillator type (SUS304) 16 mesh. Coarse granulator: Multi-blade type (SUS304). Second granulat...
Hiroshima, Japan
2007 Sekisui Aqua System CS-4R
- used
- Manufacturer: Sekisui
Specifications:Processing capacity: 40-50kg/DS/h (standard processing) Cleaning method: filter cloth circulation method Filtration area: 1.19 m2 Filter cloth drive motor: 1.5kw 4p 440V Filter cloth washing pump: ...
Hiroshima, Japan
1985 Ando Screen Model 915
- used
- Manufacturer: Ando
Good condition SS screen in stock! Processing volume:60m3/h(fresh water) Net width:900mm SS and suspended solids contained in sewage and wastewater are SS and suspended solids contained in sewage and wastewater a...
Kure, Japan
Large machinery industry DSS-45-L
- used
- Manufacturer: Large machine industry
Screen mesh size: 1mm Triple-layer drum structure (each screen is independent) Suitable for liquid products.
Hiroshima, Japan
GL reactor 100L
- used
Capacity: 100L Jacketed and agitated *The insulation is currently being removed to confirm the nameplate. The nameplate and documentation were not found, so details are unknown.
Hiroshima, Japan
Chuo Kakoki VU-60
- used
- Manufacturer: Chuo Kako Kikai Kikai
Total Capacity: 125L (Actual Capacity: 30L) Jacket Pressure: 1.9kg/cm2G Frequency: 1800
Hiroshima, Japan
Kansai Chemical Machinery Manufacturing 3000L
- used
- Manufacturer: Kansai Chemical Machinery Manufacturing Co.
Capacity: 3000L Design Pressure: Body F.V., Jacket 0.2MPa Design Temperature: Body 95°C, Jacket 132°C Type 2 Pressure Vessel Documentation Available
Hiroshima, Japan
SEC FK-22-10
- used
- Manufacturer: SEC
Cubic type Heat transfer area: 1.53m2 Design pressure: 2kg/cm2G
Hiroshima, Japan
Ikebukuro Horo Kogyo 2000L
- used
- Manufacturer: Ikebukuro Enamel Industry
Capacity: 2000L Design Pressure: Main Unit F.V. ~0.294 MPaG, Jacket 0.39 MPaG Outline drawing available
Hiroshima, Japan
Multitubular heat exchanger
- used
Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One
Hiroshima, Japan
1998 [Daiko Kakoki] Conical Dryer 1000L
- used
- Manufacturer: Daiko Kako Kako Kikai
Can body 1200φ×1837 Design pressure: FV vacuum inside can ~3Kg / Jacket 3kg
Hiroshima, Japan
Dalton DV-1-100
- used
- Manufacturer: Dalton
Total capacity: 220L with butterfly valve Power: 0.75KW | Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: 1 unit
Hiroshima, Japan
2000 Kohken Powtech FS-J01-S
- used
- Manufacturer: Kohken Powtech Co.
Capacity: 20Kg/h max. ⇓Test run video⇓. Power: 0.4Kw200V | Quantity saved: 1
Hiroshima, Japan
2007 Buhler SDV 1100
- used
- Manufacturer: Bühler
Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...
Hiroshima, Japan