Used Processing in Hesse, Germany

1997 BATTENFELD WITTMANN BA 400-125 CDC

• Manufacturer: Battenfeld

Fabrikat / manufacturer BATTENFELD WITTMANN Type BA 400-125 CDC Control system UNILOG B4 Schliesskraft / clamping force 400 kN / 44 US tons Year 1998 Holmabstand / dist. betw. tie bars 304 x 304 mm Platte...

1998 BATTENFELD WITTMANN BA 800 / 315 CDC

• Manufacturer: Battenfeld
• Model: BA 800 315 CDC

Manufacturer BATTENFELD WITTMANN Type BA 800-315 CDC Control system UNILOG B4 Schliesskraft camping force 800 kN / 88 US tons Year 1998 Holmabstand / dist. betw. tie bars 404 x 404 mm Plattenabstand / day...

2006 Kärcher BR55-60W (M100000992)

• Manufacturer: Kärcher

Scrubber dryer Kärcher BR 55-60 W Battery operation 24 Volt 1300W Roller machine with drive without batteries This article refers to: Kärcher BR55-60W

heraeus Anwärm/Glühofen (M100000270)

• Manufacturer: Heraeus - Hanau - Vötsch

Heating surface Length:500mm Width:300mm Height:300mm Max. temp. 800 -Defect- This oven no longer heats properly This article refers to: heraeus Anwärm/Glühofen

2023 MHG SMG 50 (M100001087)

• Manufacturer: SMG

Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves Special rubber, wear-resistant, cotton inside, firmly connected to the cabi...

CompAir 178 A CD E (M100000916)

• Manufacturer: CompAir

Compressor system type 178 A CD E Delivery volume 4760 l min 9 bar Operating pressure KW 30 This article refers to: CompAir 178 A CD E

JAESPA AS 6

• Manufacturer: Jaespa

For cutting aluminum heat exchangers. Hydraulic feed table, special clamping device. Aluminum heat exchanger * This band saw is a custom machine and can be customized to your requirements during production.

Heraeus KM 260 (M100000885)

• Manufacturer: Heraeus - Hanau - Vötsch

Curing oven type KM 260 Temperature - 1150 C width 250 mm Height 150 MM Depth 500 MM This article refers to: Heraeus KM 260

Gansow 62 BF 65 Reinigungsmaschine (M100000210)

• Manufacturer: Gansow

Cleaning machine, scrubber dryer Gansow 62 BF 65 Manufacturer: Gansow Model: 62 BF 65 With charger Hand-guided cleaning machine - scrubber dryer with 62 cm working width. used fully functional wearing parts in go...

2007 CompAir Kompressor L30-7,5A (M100000593)

• Manufacturer: CompAir
• Model: L30-7.5

Compair compressor L30-7,5A Type L30-7,5A Total weight 923kg Year of construction 2007 Maschnr.100010811/0048 380V Volume flow 5,75m Stage pressure 7.5 bar Suction pressure 1 bar Full load current 71 Ah Speed 300...

2011 Schneider AM4-10

• Manufacturer: Schneider

Compressor construction: screw compressor | Pressure: 10 bar | Flow: 435 l/min | Motor speed: 4320 rpm | Condensate drain: automatically | Weight approx.: 169 kg | Dimension: 930x705x905 mm | Engine power: 4 kW ...

Intermediate Bulk Container

For packing group II (medium hazard) and III (low hazard). As a pressure vessel additionally approvable for packing group I (high hazard) Closed system for direct pressure or suction extraction Flange can be dism...

2017 Schneider CPM L 330-

• Manufacturer: Schneider

Compressor construction: reciprocating compressor | Container volume: 20 liters | Pressure: 10 bar | Suction capacity: 300 l/min | Real quantity delivered: 210 l/min | Motor speed: 1450 rpm | Weight approx.: 49 ...

SF Solution

Roll-ex® SF is a combination of a gear pump with a single screw extruder as a feeding system. We will gladly assist you! Get in contact with us: phone: +49 661 9741-19 or send us an e-mail: We will gladly assist...

TRF Solution

• Manufacturer: UTH

Roll-ex® TRF (Two-Roll Feeder) is a combination of a gear pump with a two-roll feeder developed by UTH. We will gladly assist you! Get in contact with us: phone: +49 661 9741-19 or send us an e-mail: We will gla...