Used Bottling, Filling & Packaging

Trusted Seller
Fogg 50 Heads
- Manufacturer: Fogg
Setup for Water Rinsing, Stainless Steel Construction, Compact machine, Flips bottles upside down to rinse with water and then turns back upright, Infeed timing screw, Last ran production December 2020, 480 Volta...
Hickory, NC
Trusted Seller
Dyco Debagging Table for Gallons
- Manufacturer: Dyco
Approximately 50 inches wide x 16 feet long with matte top plastic belted feed conveyor, pneumatic plastic bag cutter, bottle hold down/indexing bar, mild steel main frame, Last running 1 Gallon HDPE Water Bottles
Hickory, NC
Trusted Seller
2020 Sentry Grip Rinse
- Manufacturer: Sentry
D Style Soft Touch Gripper Bubbles, Stainless Steel HP1873 Rexnord Chain, Ionized Air Rinser, Adjustable to Run Multiple Bottle sizes with Hand Crank, Stainless Steel Construction, Last Ran Various Glass Bottles ...
Hickory, NC
Trusted Seller
MRM Elgin Filler Liquid Grav/Press RFL 12 HEAD
- Manufacturer: Elgin
MRM Elgin, Automatic, 12 head, stainless steel rotary, fill to level pressure gravity filler rated from 24 to 120 containers per minute – depending on materials, application and machine configuration. Capable of ...
Carol Stream, IL
Trusted Seller
Horix Filler Liquid Grav/Press HBP9-18
- Manufacturer: Horix
Horix Model HBP 9-18-59, Automatic, 18 head, rotary, pressure gravity filler with number of containers per minute – depending on materials and application. Maximum container diameter: 6-1/2" on round and rectangl...
Carol Stream, IL
Trusted Seller
2023 Palmer 12/1
- Manufacturer: Palmer
Rebuilt and Never Used, Setup for THC Style Beverages, Standard 12oz. Cans with 202 lids, Rated at 60 cans/minute Download PDF Spec Sheet
Hickory, NC
Trusted Seller
Crown – Angelus Uniblend 72 – 120L
- Manufacturer: Angelus
- Model: 120L
Last ran carbonated soft drinks on 12oz standard cans up to 1100 cans per minute, In operation till November 2024, Filler and Seamer have been well maintained, Setup for 202 lids, Filler and Seamer are mounted on...
Hickory, NC
Trusted Seller
Variovac Optimus
- Manufacturer: Variovac
- Model: Optimus
Variovac Optimus Rollstock. All stainless steel construction, Web Width: 360 mm, Advance: 300 mm, Equipped with a UniSource Matrix Labeler, Knife setups: 2 guillotine and rotary trim blades, Equipped with a trim ...
Skokie, IL
Trusted Seller
Orics Ind Filler Paste Twin VFND1603
- Manufacturer: Orics Ind
Orics, Model VFND1603, automatic, stainless steel, 3 head piston filler with hopper. Rated from 5 to 30 cycles per minute with number of containers – depending on materials and application. Fill size range: 1 oz ...
Carol Stream, IL
Trusted Seller
Choice Bagging Equipment Filler Powder Bulk 205
- Manufacturer: Choice Bagging Equipment
CBE Choice Bagging Equipment, Model 2050, Auger fed, valve bag filler capable of handling a varity of powders, flakes and granular products rated from 1 to 6 bags per minute – depending on materials, application ...
Carol Stream, IL
Trusted Seller
Choice Bagging Equipment Filler Powder Bulk 205
- Manufacturer: Choice Bagging Equipment
CBE, Model 205, Auger fed, valve bag filler capable of handling a varity of powders, flakes and granular products rated from 1 to 6 bags per minute – depending on materials, application and operator dexterity. Al...
Carol Stream, IL
Trusted Seller
World Cup Filler Cup Rotary 12-32
- Manufacturer: World Cup
World Cup Model 2 up, 16 pocket, rotary cup denester, filler, heat sealer and lidder, with number of cups per minute depending on materials and application. Stainless steel and anodized aluminum components. Conta...
Carol Stream, IL
Trusted Seller
World Cup Filler Cup Rotary 8-80
- Manufacturer: World Cup
World Cup, Model 8-80, automatic, 8-pocket, intermittent motion, stainless steel, rotary cup filler, roll stock film heat sealer and over-lidder with number of cups per minute – depending on materials, applicatio...
Carol Stream, IL
Trusted Seller
Federal Filler Liquid Monoblock 64VALVE
- Manufacturer: Federal
Federal, automatic, stainless steel, monoblock system with 64 head rotary gravity filler and 32 head rotary press on capper. Rated from 100 – 500 containers per minute – depending on materials and application. Eq...
Carol Stream, IL
Trusted Seller
Cozzoli Model RM110 Monoblock Filler Liquid
- Manufacturer: Cozzoli
Cozzoli, model RM110, automatic inline intermittent motion stainless steel monoblock, fill, plug and screw cap system. Rated up to 110 containers per minute – depending on materials, application and machine confi...
Carol Stream, IL
Weldotron 7030 Bottling, Filling & Packaging
- Manufacturer: Weldotron
- Model: 7030
Good condition Weldotron 7030 Bottling, Filling & Packagings. Located in USA and other countries. Click request price for more information.
USA