Used rollers

SHRP Gyratory Compactor(standard)
- new
- Manufacturer: BEIJING SINYDEC INSTRUMENT
Product name: SHRP Gyratory Compactor(standard) | Specification: ASTM D6307-98 | Producing area: USA
Beijing, China
SHRP Gyratory Compactor(experiment)
- new
- Manufacturer: BEIJING SINYDEC INSTRUMENT
Product name: SHRP Gyratory Compactor(experiment) | Specification: ASTM D6925;AASHTO,SHRP计划 | Producing area: China
Beijing, China
Inlay Flexural Strength Tester
- new
Product introduction The Inlay Flexural Strength Tester is mainly composed of timers, counters, sensors, speed control motors, drive rubber rollers, timing pulleys, racks and other components.The speed-regulating...
Shenzhen, China
±2um Lab Automatic Film Coater Small Roller Coating Machine
- new
- Manufacturer: POOTAB
Coating thickness: 5um~300um | Controller: Touch Screen | Thickness accuracy: ±2um | Highlight: Touch Screen Lab Roller Coating Machine, Lab Small Roller Coating Machine, 5um Lab Automatic Film Coater | Packagin...
Dongguan, China
Hand Roller 2000g CNS 11888 Adhesion Testing Machine
- new
- Manufacturer: Perfect
Model: PT-6020-2 Wheel diameter 84+-1mm Rubber thickness: 6mm Rubber hardness: 85HS+-5 Wheel width: 45mm metal wheels Wheel load: 2000g+-50g
Dongguan, China
QC-803M Motor Type Roller Confirm to JIS-C2107、Z0237、PSTC7、ASTM D3330、ASTM D1000 Standard
- used
This model is designed for preparing adhesive tape peeling samples. It uses a standard rubber roller to evenly press the tape onto a stainless steel plate or other surfaces. Compared to manual application, the mo...
Taichung City, Taiwan
DIN Abrasion Tester Rubber Abrasion Tester Sole Leather Roller Abrasion Tester
- used
- Manufacturer: HJ
DIN Abrasion Tester Rubber Abrasion Tester Sole Leather Roller Abrasion Tester The testing machine under the specified contact pressure and a given area, the sample and sandpaper into a certain Angle, the test sa...
Dongguan, China
Rolling Roller Peel Strength Tester Manual Roll Wheel Adhesion Test Fixture
- new
- Manufacturer: Perfect
Wheel weight: 2 KG Or 5KG | Machine weight: 2.5KG | Rubber layer hardness: Hs80±5 | Standards: CNS 11888, PSTC-8 | Particular attention: Do not pressure when use. (Rolling wheel and the grip was separated but...
Dongguan, China
Hand Manual Rolling Wheels 2 KG Peel Tester For Roller Stripping Strength Test Machine
- new
- Manufacturer: Perfect
Wheel weight: 2 KG | Machine weight: 2.5KG | Rubber layer hardness: Hs80±5 | Wheel width: 45mm Metal Wheel | Rolling speed: 300mm/min | Standards: CNS 11888, PSTC-8 | Highlight: peel test equipment, adhesive pee...
Dongguan, China
Manual Roller , Motor Roller Confirm to JIS-C2107, Z0237, PSTC 7 Standard
- used
- Manufacturer: cometech testing machines
QC-803A QC-803A is controlled by hand, hold roller and slightly go up, let fixed base leave the axle center, this moment the roller equals to standard weight, with 300mm/min speed back and forth roll through spec...
Taichung City, Taiwan
Circle Driven Balancing Machine Fully Automatic Roller Touch Screen Vertical Ring Drive Balancing Machine
- used
- Manufacturer: Hong Jin
Circle driven balancing machine Ring belt balancing machine is widely used in all kinds of small and medium-sized motor rotor, impeller, crankshaft, drum and shaft rotation workpiece balance correction. Using the...
Dongguan, China
Alpa Metrology BB380 (BB380TD)
- new
- Manufacturer: Alpa
Analogue special thickness gauge ALPA BB380 Monoblock light alloy frame, dial movement on jewel bearings. Standard contact point form C. Models available on request with contacts as per the list under the table....
Pontoglio, Italy
Alpa Metrology BB380 (BB380TC)
- new
- Manufacturer: Alpa
Analogue special thickness gauge ALPA BB380 Monoblock light alloy frame, dial movement on jewel bearings. Standard contact point form C. Models available on request with contacts as per the list under the table....
Pontoglio, Italy
Alpa Metrology BB380 (BB38001100)
- new
- Manufacturer: Alpa
Analogue special thickness gauge ALPA BB380 Monoblock light alloy frame, dial movement on jewel bearings. Standard contact point form C. Models available on request with contacts as per the list under the table....
Pontoglio, Italy
Alpa Metrology BB380 (BB38001200)
- new
- Manufacturer: Alpa
Analogue special thickness gauge ALPA BB380 Monoblock light alloy frame, dial movement on jewel bearings. Standard contact point form C. Models available on request with contacts as per the list under the table....
Pontoglio, Italy