Used Roundo Bending & Forming

1980 ROUNDO PS 460/10 #1601019

• Manufacturer: Roundo
• Model: PS 46010

SPECIFICATIONS: Roll diameter: 18" TOP ROLL | Capacity, prebend: 10' X 1.25" | Capacity, mild steel: 10' X 1-1/2" | Hydraulic adjustment: YES | Roll position indicators: YES | Pendant control: YES | Hydraulic mot...

5' X .220 Roundo Plate Roll Z23020

• Manufacturer: Roundo

5' Maximum Width 7/32 Thickness Capacity 8.07" Diameter Top And Bottom Roll 6.29" Diameter Side Rolls Hydraulic Drop End Hydraulically Driven Pre Bending Capacity 59.0" x .256 Rolling Capacity 59.0 x .433 1991 4 ...

2" x 2" x 1/4" ROUNDO "SR-2" HYDRAULIC HORIZONTAL ANGLE-BENDING ROLL w/LEG-IN LEG-OUT - HYDRAULIC ROLL ADJUSTMENT - SET OF ROLLS - PENDANT CONTROL

• Manufacturer: Roundo

2" x 2" x 1/4" ROUNDO HYDRAULIC HORIZONTAL ANGLE BENDING ROLL Imperial Metric New 2006, Serial No 06815, Model SR-2 EQUIPPED WITH: Leg In - Leg Out Hydraulic Roll Adjustment Set of Rolls On Machine Hand Held Pend...

2002 Roundo PASC-360 1" x 10' 4-Roll Hydraulic Plate Bending Roll

• Manufacturer: Roundo

Features: Moveable Operators Control Console Digital Readouts for Roll Positioning Variable Roll Speed Hydraulic Drop End Hydraulic Tilt of Each Side Roll for Cone Rolling Overhead Plate Support Equipped With: Mo...

ROUNDO R-3 HYDRAULIC ANGLE BENDING ROLL

• Manufacturer: Roundo

Serial# 007264 Capacity: -Angles- 3″ x 3″ x 5/16″ Wired 208-230/460v 3ph Comes with the standard split rolls for flats and a set of 1 1/4″ & 1 1/2″ pipe rolls ***ALL ORIGINAL PAINT- MACHINE SAW VERY LITTLE USE***

Roundo R9S

• Manufacturer: Roundo

8" X 8" X 1" ROUNDO HYDRAULIC ANGLE BENDING ROLL MODEL R9S S/N OD2732 NEW 1982 ROLL DIAMETER .................... 29" ANGLE IRON, LEG OUT .............. 8" X 8" X 1" MIN. DIAMETER .....................

Roundo 50″ of 12ga Sheet Metal Bending Roll

Serial# 3388 Shipped- 2001 Capacity- 50″ of 12ga Mild Steel Wired- 220v 3ph All original paint. Rolls are in good shape.

2023 Roundo R4S 4" x 4" x 1/2" Hydraulic Angle Bending Roll

• Manufacturer: Roundo
• Model: R4

Features: Siemens Simatic HMI NC Control Electronic Measurement of Rotation Standard Set Of Bending Rolls Hydraulic Powered Adjustment Of Lower Rolls Hydraulic Guide Rolls Pushing Roll Unit Equipped With: Siemens...

Roundo PS-360 1″ x 10′ Hydraulic Plate Bending Roll

• Manufacturer: Roundo

Product Description General Info Stock #: 120250062 Location: Decatur, GA Brand: Roundo Model: PS-360 Serial #: 976489 Year: 1997 Approx. Shipping Weight: 40,000 Lbs. Approx. Shipping Dimensions: 18′ L x 7′ W x 8...

Roundo PASC-360 1″ x 10′ 4-Roll Hydraulic Plate Bending Roll

• Manufacturer: Roundo

Product Description General Info Stock #: 121250040 Location: NY Brand: Roundo Model: PASC-360 Year: 2002 Approx. Shipping Weight: 47,500 lbs Loading Fee: Rigging Required Specifications Bending Capacity: 1″ x 10...

ROUNDO R-3-S

• Manufacturer: Roundo
• Model: R-3-S

ROUNDO (NEW) MODEL R-3-S ANGLE ROLL ANGLE LEG CAPACITY - 3" X 3" X 3/8" LEG OUT - 3" X 3" X 3/8" LEG IN - 3-1/2" X 3/4" FLAT ON EDGE - 6" X 1-1/4" FLAT IRON ON FLAT 10" ROLL DIAMETER DRIVE ON ALL 3 ROLLS - INFINI...

ROUNDO R-62-S

• Manufacturer: Roundo

ROUNDO (NEW) MODEL R-62-S SECTION ROLL (3) DOUBLE PINCH ROLLS 7-1/8" TOP SHAFT DIAMETER 6-1-4" LOWER SHAFT DIAMETER 18" X 1/8" TOP AND LOWER ROLL DIAMETER 0-23 FPM ROTATION SPEED 20 HP FEATURES - UNIVERSAL MODULA...

ROUNDO R-4-S

• Manufacturer: Roundo
• Model: R4

ROUNDO (NEW) MODEL R-4-S ANGLE ROLL ANGLE LEG CAPACITY - 4" X 4" X 1/2" LEG OUT - 4" X 4" X 3/8" LEG IN - 5" X 5/8" FLAT ON EDGE - 7" X 1-1/2" FLAT IRON ON FLAT 12.2" ROLL DIAMETER DRIVE ON ALL 3 ROLLS - INFINITE...

2007 ROUNDO R-5-S

• Manufacturer: Roundo
• Model: R-5-S

ROUNDO (USED) MODEL R-5-S 5" X 5" X 1/2" ANGLE LEG-OUT 4" X 4" X 1/2" ANGLE LEG-IN 8" X 2" FLAT IRON ON FLAT 6" X 5/8" FLAT ON EDGE 5" PIPE 8" I BEAM AND CHANNEL 2-3/4" TO 32" ID SQUARE BAR 3-1/2" TO 40" OD ROUND...