Used Granulators & Pelletizers

CONDUX CS500/1000 GRANULATOR 1725

• Manufacturer: Condux

Condux model CS500/1000-III granulator, S/N 44. Approximately 20″ x 40″, 6 knife fly, beam support rotor, 2 bed knife, 24″ base. No starter and no hydraulics.Price: $15,000.00, as is, where is.

CUMBERLAND FX1628 GRANULATOR SYSTEM 19037

• Manufacturer: Cumberland

Used Cumberland model FX1628 granulator. S/N FX1628-21010. 16″ x 28″ feed throat with offset cutting chamber. 3 knife dual flywheel open rotor with two bed knives. 6″ OD airveyor discharge. Belt driven by a 30 HP...

CUMBERLAND 8″ PELLETIZER ROTOR 24 8429

• Manufacturer: Cumberland

Cumberland 8″ pelletizer rotor 24 tooth solid rotor helical cutter. Ceco part number 64743.

Conair JC-810 Granulator 460V 8.1A 3PH

• Manufacturer: Conair

“Used item as seen in the images.” Conair JC-810 Granulator 460V 8.1A 3PH 0-C-69066 This item is listed for free local pickup. We will ship freight at the expense of the purchaser. Please message us with any qu...

CONAIR / WORTEX TF1624 GRANULATOR 14783

• Manufacturer: Conair

Conair / Wortex model TF1624 granulator. S/N Q-6859. 16″ x 24″ feed throat, 3 knife slant cut open rotor, 2 bed knife, tangential cutting chamber. 30HP 230/460V motor, insulated tray feed hopper, insulated body p...

CUMBERLAND 484 GRANULATOR WITH FEED 18635

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 421000-92513. 14″ x 16″ feed throat. 3 knife slant cut rotor, 2 bed knife. 15 HP 460-volt motor. Front feed roll in-feed only. Polynetics 15″ wide steel grooved feed rolls are...

NELMOR G1220M1 GRANULATOR WITH SIDE 16617

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 7612-10077. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife. 20HP 230/460V motor. Single wall tray feed hopper evacuated by a side mounted Nelmor model F410 1HP blower...

NELMOR G1220M1 GRANULATOR WITH PIPE 16678

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 8010-15995. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife, 25HP 230/460V motor. Left hand 10″ x 5.75″ side profile chute, in-feed only. Side mounted 5003FD 3HP blowe...

GLAVES GCD-75C 24 KNIFE PELLETIZER 19029

Used Glaves model GCD-75C pelletizer. Dual drive machine, one for the cutter head and one for the top pull roll. 75mm entrance. 24 knife helical cutter head. Mounted on casters.

WEIMA ZMK60 SHREDDER WITH GRANULATOR 18272

• Manufacturer: Weima

Used shredder / grinder combination system including the following:Weima four shaft shredder model ZMK60 with dual 25 HP 460-volt motors and controls. Has a 74″ x 55″ hopper opening narrowing to a 27″ x 50″ wide ...

NELMOR G1215P1 GRANULATOR WITH FEED 16280

• Manufacturer: Nelmor

Nelmor model G1215P1 granulator. S/N 99K03325. 12″ x 15″ feed throat, 3 knife open rotor, 2 bed knife 15HP 208-230/460V 1,480 RPM motor. Double wall rear top hand feed with front mounted knurled steel feed rolls,...

CUMBERLAND 1420 GRANULATOR FOR AIR 14752

• Manufacturer: Cumberland

Cumberland model 1420 granulator for air table. 3 knife rotor, 2 bed knife. Evacuated by a 7075FD blower with 7″ OD inlet and 6″ OD outlet. Insulated in-feed box, all mounted on a unitized caster frame base.

CUMBERLAND 284 GRANULATOR WITH FEED 17466

• Manufacturer: Cumberland

Cumberland model 284 granulator, S/N 525525-84012, 10″ x 12″ feed throat, 3 knife open slant cut rotor, 2 bed knife, 7.5 HP 460-volt motor, insulated tray feed hopper with rear facing 8″ wide knurled steel and in...

BALL & JEWEL BP22 GRANULATOR 17268

• Manufacturer: Ball & Jewell

Ball & Jewel model BP22 granulator, S/N 9505-36802 10″ x 12″ feed throat, 3 knife open rotor 2 bed knife, 7.5 HP 230/460 volt motor single wall tray feed hopper bin discharge on casters complete with starter and ...

CONAIR / WORTEX CK1018 GRANULATOR 14280

• Manufacturer: Conair

Conair / Wortex model CK1018 granulator. S/N 300.1141. 10″ x 18″ feed throat, 3 knife open rotor, 2 bed knife. 10HP 460V motor. Insulated tray feed hopper and body panels. 2″ left hand vacuum take off discharge. ...

CPM 7932 Granulators & Pelletizer

• Manufacturer: CPM
• Model: 7932

Good condition CPM 7932 Granulators & Pelletizers. Located in Netherlands and other countries. Click request price for more information.