Used Punch Machines

TIN KNOCKER TK 18 STATION TURRET PUNCH
- Manufacturer: Tin Knocker
- Model: TK18
TK 18 Hand Turret Punch Specifications: Dimensions: 30 x 37 x 58 in Capacity: 8 Tons Throat Depth: 18"Tooled Stations: 18Punch Range: 1/8" - 2 1/4"Punch Sizes: .1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8...
Ennis, TX
Trusted Seller
1981 National 4DIE Ultra Long Stroke Progressive Header
- Manufacturer: National
Equipped With * Large Free Standing Two Plane Straightener * Ajax Hogue #4 Wire Drawer * PKO Note: Machine is a four die progressive header but only using the machine as three die. There is no kickout in fourth d...
Vaughan, Canada
F16 Corner Radius Punch with V-Groove
- Manufacturer: Punch press and shear
Punches are supplied with a single v-groove. Use 1/8" Round x 1" Long Keystock to align punches in the machine. All sizes listed ship within 24 hours. Contact us for custom sizes not listed. Commonly paired with ...
$138 USD
Ravenna, OH
F20 Hexagon Punch with 6mm Cross Keyway
- Manufacturer: Punch press and shear
Punches are supplied with a 6mm wide x 4mm deep cross keyway. Use 6mm x 6mm Keystock to align punches in the machine. All sizes listed ship within 24 hours. Contact us for custom sizes not listed. Commonly paired...
$68 USD
Ravenna, OH
F26S Oblong Punch with 6mm Cross Keyway
- Manufacturer: Cleveland Punch & Die
Punches are supplied with a 6mm wide x 4mm deep cross keyway. Use 6mm x 6mm Keystock to align punches in the machine. All sizes listed ship within 24 hours. Contact us for custom sizes not listed. Commonly paired...
$75 USD
Ravenna, OH
2-1/2" Punch Nut Wrench
- Manufacturer: Punch press and shear
Wrench is in stock. For Punch Nuts with a hexagon size of 2-1/2". Part #: P20A0046 Dimensions: Proudly Made in the USA
$95 USD
Ravenna, OH
Trusted Seller
SHIMAZU Super 4A
- Manufacturer: SHIMAZU
Maximum thread diameter: 12 millimeters | Minimum thread diameter: 8 millimeters | Production rate: 80-140 ppm | Weight (approx): 2000 pounds
Vaughan, Canada
Trusted Seller
1978 ACME P-2
- Manufacturer: Acme
Equipped With * Two same model machines avail for sale. FOR WIRE, TUBING, ROD, CABLE, & PIPE CONTINUOUS WIRE DESCALING OF SPEEDS UP TO: 300 FPM OPERATION CAN BE WET OR DRY MOTOR - DESCALING/BRUSHING HEADS: 20 HP
Vaughan, Canada
F12 Oblong Punch with 4mm Single Keyway
- Manufacturer: Punch press and shear
Punches are supplied with a 4mm wide x 4mm deep single keyway. Use 4mm x 6mm Keystock to align punches in the machine. All sizes listed ship within 24 hours. Contact us for custom sizes not listed. Commonly paire...
$57 USD
Ravenna, OH
F16 Square Punch with 4mm Single Keyway
- Manufacturer: Punch press and shear
Punches are supplied with a 4mm wide x 4mm deep single keyway. Use 4mm x 6mm Keystock to align punches in the machine. All sizes listed ship within 24 hours. Contact us for custom sizes not listed. Commonly paire...
$56 USD
Ravenna, OH
F20 Square Punch with 6mm Single Keyway
- Manufacturer: Punch press and shear
Punches are supplied with a 6mm wide x 4mm deep single keyway. Use 6mm x 6mm Keystock to align punches in the machine. All sizes listed ship within 24 hours. Contact us for custom sizes not listed. Commonly paire...
$64 USD
Ravenna, OH
F20 Corner Radius Punch with 6mm Cross Keyway
- Manufacturer: Cleveland Punch & Die
Punches are supplied with a 6mm wide x 4mm deep cross keyway. Use 6mm x 6mm Keystock to align punches in the machine. All sizes listed ship within 24 hours. Contact us for custom sizes not listed. Commonly paired...
$138 USD
Ravenna, OH
F16 Corner Radius Punch with 4mm Cross Keyway
- Manufacturer: Punch press and shear
Punches are supplied with a 4mm wide x 4mm deep cross keyway. Use 4mm x 6mm Keystock to align punches in the machine. All sizes listed ship within 24 hours. Contact us for custom sizes not listed. Commonly paired...
$138 USD
Ravenna, OH
Trusted Seller
2013 EUROMAC ZX FLEX 1500 TURRET PUNCH
- Manufacturer: Euromac
- Model: ZX Flex
2013 EUROMAC ZX FLEX 1500 TURRET PUNCH Manufacturer: Euromac Model: ZX Flex 1500 POWER: 575V 60HZ 3PH 7.5KW 10.7A Punching Force: 24 Ton Work Range (no reposition): 1500 × 2500 mm X Auto-Reposition: Up to ...
Ontario, Canada
Trusted Seller
1999 AMADA VIPROS 255 CNC PUNCHING MACHINE
- Manufacturer: Amada
- Model: Vipros-255
Bill: AMADA | Tonnage: 22T | Max. sheet size: 50" X 100" (WITH REPOSITIONING) | Max. positioning speed: 2559"/MIN | Max. strokes per minute: 340 TO 1" CENTERS | Max. punching capacity: 1/4" | Tool stations in th...
Québec City, Canada
Geka Puma Punch Machine
- Manufacturer: Geka
- Model: Puma
Good condition Geka Puma Punch Machines manufactured in 2023. Located in USA and other countries. Click request price for more information.
USA