Used Machine Tools in Indiana, USA

Gyromatic G-5D Vibratory Finisher Mixed Media 5Hp 230/460V 3Ph Tumbler

• Manufacturer: Gyromatic

Used, in Good Working Condition. We used this in our shop. The media is mixed. The unit works good. Comes with media and a drain tub. Setup for a garden hose. Motor is wired for 480V. Could be 230/460V. Product V...

Wilton C-1 Combination Pipe Bench Vise 4-1/2" Jaw Bullet Vintage 03-94

• Manufacturer: Wilton

Used, in Good Working Condition. This unit has like a 8th turn of play. If this item ships as Flat Rate Freight please see details in Shipping tab

Franz Kessler 8389.000 High Speed Precision Spindle Cartridge 8000 RPM ME618

• Manufacturer: Franz Kessler

New Old Stock Surplus Item from Spare Parts Storage. Looks to be a spare spindle cartridge HS-A 80-B100-B Tool gripper If this item ships as Flat Rate Freight please see details in Shipping tab

Okuma OEO-OKM-MA-1 Oil Controller Chiller Unit 750W Compressor 200V 3Ph 15g Tank

• Manufacturer: Okuma

Used, in Good Working Condition. Removed From a Working Environment. This unit was pulled from a working machine a few weeks ago. Oil stains on outside. Has 15 gallon tank with 2 oil pumps. If this item ships as ...

Gould Eberhardt 16" Metal Shaper High Duty Universal Shaper Vise Atlas Gemco

• Manufacturer: Gould & Eberhardt

Used, in Good Working Condition, Tested. 230V only. This is an older scraper machine. 16" stroke. If this item ships as Flat Rate Freight please see details in Shipping tab

Daikin Oilmatic Hydraulic Oil Chiller Temp Regulator 200/220V 3Ph

• Manufacturer: Daikin

Used. This came off of a working machine. If this item ships as Flat Rate Freight please see details in Shipping tab

Turbo Systems 40"x 14' CNC Scrap Chip Conveyor Low Profile 230/460V 3PH 10FPM

• Manufacturer: Turbo Systems

In Good Used Condition. Tested and cleaned in our shop. Tested @460V. Turbo Systems Scrap/Chip Conveyor. 40" Frame width, 34-3/4" between frame. 34" bed width. 14' 1" Overall length. Gear Motor: 1/2Hp 1140 RPM...

Hennig 44"x 9' 6"L CNC Chip Conveyor 40"Belt 40" Discharge 230/460V 3PH 8FPM

• Manufacturer: Hennig

Condition: In good working condition, cleaned and tested in our shop. Set up with E-stop and forward/reverse switch. Drive type, motor specs: Chain drive. 1/4Hp 208-230/460V 120:1 Gearmotor Voltage tested at an...

Chip Blaster JV40MAK Coolant System High Pressure Pump 480V 40LPM Dual Filter

• Manufacturer: ChipBlaster

Used, in Good Working Condition. Removed From a Working Environment. Recovery System for a Chip Blaster 480V 3 phase High pressure plunger pump. 7.5hp Model 2119 8x34" Filter housing. 48x24x22" coolant holding ta...

Hennig CNC Chip Conveyor 16"x 67" Infeed 31-35" Discharge 230/460V 3PH

• Manufacturer: Hennig

In Good Used Condition. Tested and cleaned in our shop. Tested @230V Enomoto Chip Conveyor. 230/460V 3PH Chain drive gearmotor. If this item ships as Flat Rate Freight please see details in Shipping tab

Enomoto CNC Chip Conveyor 16"x 67" Infeed 46-50" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Tested @220V Enomoto Chip Conveyor. 220V 3PH Chain drive gearmotor. If this item ships as Flat Rate Freight please see details in Shipping tab

Enomoto CNC Chip Conveyor 16"x 67" Infeed 47-51" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Tested @220V Enomoto Chip Conveyor. 220V 3PH Chain drive gearmotor. If this item ships as Flat Rate Freight please see details in Shipping tab

Magnetic Incline CNC Chip Conveyor 11"x 64" Infeed 40" Discharge 230V 3PH

In Good Used Condition. Tested and cleaned in our shop. No tag or brand on conveyor, steel frame magnetic slide type. Welded front leg support is 11-3/4" off the floor. 8"W x 9"H Side infeed access on front and...

Enomoto Hinge Belt CNC Chip Conveyor 16"x 62" Infeed 31" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. -Chain guard is missing. Conveyor has an added chute welded on top of frame. Add on chute measures 16"W x 12"H x 66.5"L Measurement...

Enomoto Hinge Belt CNC Chip Conveyor 16"x 62" Infeed 36-42" Discharge 220V 3PH

• Manufacturer: Enomoto

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute on top with drain trays. This chute can be removed. Add on chute measures 15.75"W x 12.5"H x 66.5"L Dra...