Used Cnc Lathes in Illinois, USA

2012 HAAS ST-30

• Manufacturer: Haas
• Model: ST-30

2012 Haas ST-30 CNC Turning Center. Machine is in great shape with low hours. Machine comes with a 10" chuck (no collet chuck included), chip conveyor, high intensity lighting, high pressure coolant, and an oil s...

2001 Star SW-7R

• Manufacturer: Star
• Model: SW-7R

Maximum Drilling Capacity: Maximum Tapping Capacity: Main Spindle: Tool Post Specs: Sub Spindle Specs: 4 Spindle Endworking Attachment: Equipped With: Fanuc 16-T Control LNS Mono Bar Loader

2019 Doosan Puma SMX2600ST

• Manufacturer: Doosan
• Model: PUMA SMX2600ST

Control and features Machine type: Vertical Turret Lathes | Machine location: Upon Request | Stock #: 166693 | Maximum turning diameter: 660 mm (26 in.) | Maximum turning length: 1,540 mm (60.6 in.) | Chuck size:...

2007 Traub TNX 65/42

• Manufacturer: Traub
• Model: TNX65/42

(4) X-Y-Z Turrets with 10 Positions Each 65 Mm Thru Hole Main and Sub Spindle Weight-22000 Lbs. Control-Tx 8i-S Control (mitsubishi) Equipped With: Sub Spindle Has Coolant Flush Servo Driven Gantry Receiver Hydra...

2016 Tsugami BO206-III

• Manufacturer: Tsugami
• Model: BO206-III

Equipped With: Fanuc 32-iB Control Tri-Mist 850 G2 Mist Collector Chip Conveyor Edge Minuteman 320SE Barfeed Tooling (50+ Collets)

2013 Okuma Genos L300-MW

• Manufacturer: Okuma
• Model: GENOS L300

Equipped With: Machine type: Multi Axis Lathes | Machine location: New Hampshire | Stock #: 378466 | X-axis movement: 9.3″ | Z-axis movement: 18.1″ | C-axis movement: 14.1″ | Workpiece drm: 11.8″ | Number of axis...

2019 SMEC SL-3000

• Manufacturer: SMEC

2012 Mori Seiki NLX 2500 SMC/700

• Manufacturer: Mori Seiki
• Model: NLX 2500

Equipped With: Tooling and Chuck Rear Exit Chip Conveyor ChipBlaster High-Pressure Coolant System Sub-Spindle Renishaw Probing System

2002 Mori Seiki ZT 2500

• Manufacturer: Mori Seiki
• Model: ZT-2500

Specifications (subject to buyer verification): Equipped With: Chip Conveyor Y-Axis Sub Spindle Dual Turret Live Tooling

2012 OKUMA V40R

• Manufacturer: Okuma
• Model: V40R

• 12 Position turret with 6 Live tooling stations • 5HP 2000rpm spindle • • Fanuc 31i-a Control • Live tooling stations 6 • C-axis • 12" 3-Jaw Chuck • Coolant System • Chip Conveyor • 1 radial live tool and 1 axi...

2023 HARDINGE Talent T42

• Manufacturer: Hardinge
• Model: TALENT 42

Talent 42 Exceptional combination of features for accuracy, flexibility and durability • A2-5 16C collet-ready spindle • Central grease lubrication (manual) • Foot switch main spindle chuck/collet – open/close • ...

2014 DMG MORI SEIKI NTX2000SZM1500

• Manufacturer: DMG Mori
• Model: NTX 2000

Technical Description The specifications below apply to a basic machine without additional options. Specifications in square brackets [ ] are values or features for a machine with additional options. Capacity Max...

2020 MILLTRONICS SL8-II

• Manufacturer: Milltronics
• Model: SL8-II

2020 Milltronics SL8 CNC Turning Center with Tailstock. Machine is in very good condition and can be inspected under power as needed. Options include: programmable tailstock, 8" 3 jaw chuck, tailstock, chip conve...

2004 DAEWOO LYNX 210A

• Manufacturer: Daewoo
• Model: Lynx 210A

DAEWOO LYNX 210A CNC Lathe, 2004 model, in used condition. Features 20.1" swing, 13" machining length, 15 hp power, max 6,000 RPM, and 11" turning diameter. Includes chip conveyor. . Chip conveyor No Tailstock

HARDINGE CHNC-III

• Manufacturer: Hardinge
• Model: CHNC III

Used Hardinge CHNC-III CNC Lathe. 14" Swing, 1.625" Bar Cap, 10 hp, max 5000 RPM. Machine still runs, however, the spindle was running at 50% power last time they ran this machine. Parts machine, make an offer.