- Trusted Seller
Four-jaw chuck from Röhm - Ø 315 mm 27590
used
- Manufacturer: Röhm
four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 315 mm | Passage: Ø 103 mm | Hole circle: Ø 195 mm | Mass: 56 | Internal storage: 3A21202
$492 USDWiefelstede, Germany - Trusted Seller
Four-jaw chuck from Röhm - Ø 315 mm 28068
used
- Manufacturer: Röhm
four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 315 mm | Passage: Ø 105 mm | Hole circle: Ø 235 mm / M20 | Admission: Short taper 11 | Mass: 56 | Internal storage: 3A21202
$492 USDWiefelstede, Germany - Trusted Seller
Three-jaw chuck from Röhm – Ø 100 mm MK4 35754
used
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Manufacturer: Röhm, three-jaw chuck MK4 | Feed size: Ø 100 mm | Passage: Ø 20 mm | Dimension: Ø 100 x 200 mm | Mass: 3,8 | Dimensions: 100/100/H200 mm
$252 USDWiefelstede, Germany - Trusted Seller
Hydraulic power chuck from Röhm - KFD-HE 210/3 25350
used
- Manufacturer: Röhm
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks
$996 USDWiefelstede, Germany - Trusted Seller
Power chucks hydraulic from Röhm - KZDF-330/3/3 25887
used
- Manufacturer: Röhm
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks
$1,113 USDWiefelstede, Germany - Trusted Seller
Four-jaw chuck from Röhm – Ø 200 mm Camlock fastening 33226
used
- Manufacturer: Röhm
four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 200 mm | Passage: Ø 55 mm | Hole circle: Ø 133 mm | Admission: Short cone 6 / cone 103 - 105 mm Short cone flange with camloc...
$410 USDWiefelstede, Germany - Trusted Seller
Three-jaw chuck with clamping plate from Röhm - Ø 250 mm 27893
used
- Manufacturer: Röhm
- Model: 250 MM
three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate
$434 USDWiefelstede, Germany - Trusted Seller
Three-jaw chuck 80 mm from Röhm - ZS Ø 80 20426
used
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 80 mm | Without: Interchangeable jaws | Flange: 175 mm | Passage: Ø 19 mm | Dimensions: Ø 175 x 250 mm | Mass: 8,9 | Internal storage: 3A10505
$293 USDWiefelstede, Germany - Trusted Seller
Three-jaw chuck from Röhm – DURO-S Ø 160 mm Camlock fastening 35280
used
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Manufacturer: Röhm, three-jaw chuck type DURO-S Chuck size Ø 160 mm | Passage: Ø 42 mm | Hole circle: Ø 83 mm | Admission: Short taper 4 / cone 56 - 62 mm Short taper flange...
$135 USDWiefelstede, Germany
Tip: Enter manufacturer, model or keyword