Rohm 35” hydraulic 3 jaw chuck
- Manufacturer: Röhm
- Model: KFD-HS 9003
Subject to Prior Sale. This chuck is virtually new. It came off of a Johnford CNC lathe sold to a Houston shop for the manufacture of drill bits. It was in limited use for a few short months and the project was ...
- Trusted Seller
Röhm 500
- Manufacturer: Röhm
Includes 1 set of reversing claws. 3-klauwplaat: 0 mm ø | 4-claw: 500 | Through: 138 mm ø | Pitch bolt holes (width): 120 mm
Etten-Leur, Netherlands - Trusted Seller
Röhm KZPF-610
- Manufacturer: Röhm
- Model: KZPF-610
Hydr. power chuck 3-klauwplaat: 0 mm ø | Diameter: 610 mm ø | Maximum speed: 2.200 RPM
Etten-Leur, Netherlands - Trusted Seller
Etten-Leur, Netherlands - Trusted Seller
Power chuck hydraulically from Röhm - KFH-140 20777
- Manufacturer: Röhm
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Short taper
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck from Röhm - Ø 240 mm 31861
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Manufacturer: Röhm, three-jaw chuck size Ø 240 mm | Passage: Ø 77 mm | Hole circle: Ø 220 mm | Mass: 18 | Internal storage: 3A10504
Wiefelstede, Germany - Trusted Seller
Röhm three-jaw chuck - Ø 240 mm 29045
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Manufacturer: Röhm, three-jaw chuck size Ø 240 mm | Passage: Ø 53 mm | Hole circle: Ø 70 mm | Mass: 27 | Internal storage: 3A20202
Wiefelstede, Germany - Trusted Seller
Four-jaw chuck from Röhm - Ø 315 mm 27590
- Manufacturer: Röhm
four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 315 mm | Passage: Ø 103 mm | Hole circle: Ø 195 mm | Mass: 56 | Internal storage: 3A21202
Wiefelstede, Germany - Trusted Seller
Four-jaw chuck from Röhm - Ø 315 mm 28068
- Manufacturer: Röhm
four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 315 mm | Passage: Ø 105 mm | Hole circle: Ø 235 mm / M20 | Admission: Short taper 11 | Mass: 56 | Internal storage: 3A21202
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck from Röhm - Ø 160 mm 31821
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Manufacturer: Röhm, three-jaw chuck size Ø 160 mm | Passage: Ø 42 mm | Hole circle: Ø 133 mm | Admission: Short cone 6 / cone 103 - 105 mm | Mass: 10,5
Wiefelstede, Germany - Trusted Seller
Four-jaw chuck from Röhm – Ø 160 mm 36431
- Manufacturer: Röhm
four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 160 mm | Passage: Ø 40 mm | Hole circle: Ø 62 mm | Admission: Short taper 5 / cone 79 – 82 mm | Accessories: incl. 2nd set of...
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck by Röhm - diameter 240 mm 19566
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 240 mm | Passage: Ø 77 mm | Mass: 18 | Internal storage: 3A20101
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck from Röhm - diameter 125 mm 20424
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 125 mm | Without: Interchangeable jaws | Passage: Ø 32 mm | Number: 1x chuck available | Mass: 5,4 | Internal storage: 3A20304
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck by Röhm - diameter 240 mm 19528
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Feed size: 240 mm | Mounting flange: M80 x 6 mm | Without: Interchangeable jaws | Mass: 26 | Dimensions: Ø240 mm | Internal storage: MA10632
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck by Röhm - diameter 200 mm 20887
- Manufacturer: Röhm
three-jaw chuck, three-jaw lathe chuck -change jaws
Wiefelstede, Germany
Tip: Enter manufacturer, model or keyword