Used Meat & Poultry Processing in Netherlands

Spinal cord remover

• Manufacturer: Freund

Freund mobile VSS vacuum system: Vacuum for suctioning and removing the spinal cord, the brain, the remains of fat, and leaf lard of carcass.

Flocculator

• Manufacturer: VDZ Aqua

In a WPF flocculator the mixing energy for flocculation is obtained by the turbulence in the mixing unit and the pipe. A coagulant is usually dosed to the raw water at the inlet of the WPF. Immediately after the ...

Bleeding elevator

None

Evaporator ventilator

• Manufacturer: Ebmpapst

None Power: 50Hz | Voltage: 230V | Frequency: 475W | Amperage: 2.20A | Weight: 11kg

Screw press

• Manufacturer: Andritz

This Andritz is suitable for the dewatering and volume reduction of screened waste from domestic and industrial waste water. This model comprises a dewatering, transport, pressing and compacting zone. The screeni...

Organ line

• Manufacturer: Stork RMS

Overhead chain conveyor for transporting red organs. Equipped with stainless steel organ hooks and hook washer.

Scale

• Manufacturer: italiana macchi ce 9000. best

Weighing scale in good, working condition. Voltage: 220 | Frequency: 50Hz | Amperage: 300 mA | Capacity: max 15 kg . | Weight: 15 kg

Tube Weight scale with indicator

Weighing scale for tube rail systems. Stainless steel tube and including pneumatic rail blocking stops. System includes an indicator.

Bleeding hooks

Bleeding hooks, also known as bleeding shackles, are tools used to move carcasses immediately after stunning, allowing blood to drain during the bleed-out phase. These bleeding hooks are used by sliding on a tub...

Water / blood drains

Blood drains

Set of 4 membrane knife blades

• Manufacturer: Ober

New blades for use as spare parts. Availability: One set of 4 knives available

Balancer - 18-22 kg

• Manufacturer: Tecna

The TECNA TE9358 spring tool balancer has been specifically designed to provide a weightless operator experience for loads up to 48.5 lb. with no drifting, catching, or strain. As the tool is repositioned the sta...

Loading arm

• Manufacturer: NN

Galvanized hydraulic loading arm, minimum lifting height 100cm and maximum lifting height: plus minus 280 cm.

Iron beams

Tilting frying pan

• Manufacturer: Küppersbusch

Weight: 245kg