2025 RMH Trio 45
- Manufacturer: RMH
- Tire size: 4 tires 455/55R22.5
- Capacity: 45 cubic metre
Three vertical augers with overlapping system Blades on augers made of high-quality steel Eleven blades per auger Three heavy-duty planetary gear reducers Two mixing speeds, mechanically controlled Four mechanica...
Stegeren, Netherlands
2015 RMH Premium 21
- Manufacturer: RMH
- Model: Premium 21
- Horsepower: 175 horsepower
- Capacity: 21 cubic metre
Deutz TCD2012 4 cyl. 175 hp Heated mirrors Unloading door on the left front, additional unloading door on the left rear Stainless steel in the mixing bowl, approx. 1 meter high Stainless steel on the outer segmen...
Stegeren, Netherlands
2013 RMH Megamix 18
- Manufacturer: RMH
- Model: Megamix 18
- Capacity: 18 cubic metre
Deutz TCD 2012, 6-cylinder, 208 HP Stainless steel in the mixing bucket, approximately 1 m high Four hydraulic counterblades Automatic lubrication system Heated exterior mirrors Single discharge door in the cente...
Stegeren, Netherlands
2025 RMH Liberty 15
- Manufacturer: RMH
- Model: Liberty
- Capacity: 15 cubic metre
DEMO Deutz Turbo diesel engine, 135 HP, TIER5 Left and right front discharge door Gutters under discharge door Stainless steel in the mixing bucket, approximately 1 m high Stainless steel in the cultivator arm St...
Stegeren, Netherlands
2014 RMH Mixell 22
- Manufacturer: RMH
- Model: Mixell 22
- Capacity: 22 cubic metre
Electric control Delay box 2nd weighing box rear outside edge stainless steel including license plate Available immediately
Stegeren, Netherlands
2013 RMH Premium 21
- Manufacturer: RMH
- Model: Premium 21
- Horsepower: 175 horsepower
- Capacity: 21 cubic metre
Deutz TCD 2013, 4-cylinder, 175 HP Stainless steel in the mixing bucket, approx. 1 meter high = lifetime warranty! Stainless steel on the outer segments of the augers Two hydraulic counterblades Heated exterior m...
Stegeren, Netherlands
2014 RMH Premium 21
- Manufacturer: RMH
- Model: Premium 21
- Horsepower: 175 horsepower
- Capacity: 21 cubic metre
Deutz TCDD2012, 4-cylinder engine, 175 HP Stainless steel in the mixing bucket, approximately 1 m high = lifetime warranty! Stainless steel on the outer segment of the augers Augers replaced on April 1, 2018 Nine...
2009 RMH VSL 14
- Manufacturer: RMH
- Model: VSL 14
- Horsepower: 208 horsepower
- Capacity: 14 cubic metre
Hours 13300 Stainless steel in the mixing bowl, approx. 1 meter high Stainless steel on the outer segment of the jacks 3 hydraulic counter blades Electric folding mirrors unloading doors on the left and right fro...
2025 RMH Mixell 24
- Manufacturer: RMH
- Model: Mixell
- Capacity: 8 cubic metre
Chutes under the discharge doors Two vertical mixing augers with overlapping system Heavy-duty planetary gear reducers Two mixing speeds, mechanically controlled High-quality steel auger blades 10 blades per auge...
Stegeren, Netherlands
2013 RMH Mixellent 22
- Manufacturer: RMH
- Model: Mixellent
- Capacity: 22 cubic metre
Two vertical mixing augers with overlapping system Spiral mill (200cm wide) with rubber infeed belt (650mm wide) Stainless steel infeed tunnel (1m high) Stainless steel in mixing hopper, approx. 1m high = lifetim...
Stegeren, Netherlands
2014 RMH Mixellent 24
- Manufacturer: RMH
- Model: Mixellent
- Capacity: 24 cubic metre
Deutz TCD 2012, 6 cyl, 208 hp. Stainless steel in the mixing bucket, about 1 meter high Stainless steel on outer segment of augers Stainless steel in milling housing Heavy duty front and rear axle (Carraro) with ...
Stegeren, Netherlands
2006 RMH VSL 16
- Manufacturer: RMH
- Model: VSL 16
- Horsepower: 208 horsepower
- Dimensions: 78.74015748031496 inch
Deutz BF 6M 2012 C, 6 cyl, 200 HP Stainless steel in the mixing bucket, ca. 1 meter high 3 hydraulic counter knives Heated exterior mirrors Unloading door left and right front Unloading chain left and right front...
Stegeren, Netherlands
2014 RMH Premium 21
- Manufacturer: RMH
- Model: Premium 21
- Horsepower: 175 horsepower
- Capacity: 21 cubic metre
Deutz TCD 2013, 4-cylinder, 175 hp. Stainless steel in the mixing bowl, approx. 1 meter high Stainless steel on the outer segment of the augers, approx. 10 cm 2 hydraulic counter knives Heated exterior mirrors Au...
Stegeren, Netherlands
1999 RMH US 18
- Manufacturer: RMH
- Capacity: 18 cubic metre
Deutz, 6 cyl, air cooled 4 hydraulic counter knives 1 unloading door in the middle front Loose chain with stainless steel bottom at the front, releasing left and right Rear wheel drive Front wheel steering Simple...
Stegeren, Netherlands
2020 RMH Vulcan 20 GOLD
- Manufacturer: RMH
- Model: Vulcan 20
- Capacity: 20 cubic metre
Spiral milling cutter, 200cm wide, with 65 blades Stainless steel milling drum Stainless steel behind the spiral milling cutter Stainless steel in the mixing hopper, approximately 1m high = lifetime warranty! Hyd...
Stegeren, Netherlands
Tip: Enter manufacturer, model or keyword