Used Industrial Furnaces & Ovens in Poland

Ceramic-tube furnaces

• new

• Manufacturer: Ibis

Furnace, sawdust boiler with a stoker

• used

Furnace with heating power of 600 KW Low-temperature furnace, automatic system for burning biomass Type INNOVEX - BOREX - AT Date of production 2006 Technical and operation documentation Nolting scraper The whole...

Urbas 4 MW furnace

• used

Furnace with heating capacity of 4 MW Furnaces for biomass, bark, woodchip, sawdust. Moisture content of the material up to 60% Furnace available from July-August 2025

Herz 500 KW furnaces

• used

Furnace with a heating capacity of 500 KW Furnaces for biomass, bark, woodchip, sawdust, also suitable for pellet burning. TYPE Biomatic SR 500 Moisture content of material-fuel up to 60% Year of construction 200...

Furnace, blowing and extraction fans

• used

Fans of various parameters, in working order.

Froling 500 KW 25 furnace

• used

Furnace with heating power of 500 KW TYPE TURBO MAT 500 Furnace for biomass, bark, woodchip, sawdust Year 2007 Movable grates Fuel screw feeder with a length of 7.5 m and a diameter of 200 mm Very good technical ...

Viessmann 720 KW oil furnace

• used

Capacity 720 KW Year 1995

Emergency cooler for 3.5 MW furnace

• used

Total of 8 fans, under them high-efficiency coolers Two segments, one segment will cool 1500 KW

Heating furnaces for plastics

• new

• Manufacturer: Tools Factory

The device consists of a heating oven with single-sided heating from the top . The heaters have the ability to adjust each radiator individually from a touch panel. The device has a built-in PLC that controls the...

Ash conveyor, waste removal from the Ż 35 furnace

• used

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Ash conveyor, waste removal from the Ż 34 furnace

• used

Length: 4.50 m Screw diameter: 180 mm Outer diameter: 210 mm Motor with geared motor: 1.1 kW

Expansion vessel for furnace, buffer, capacity 1000 l

• used

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Continuous furnace

• used

Pass-through oven (adjustable blowing height, blowing force, belt speed, belt tensioner, two sections, complete set, including fans on chimneys, stainless steel chimneys, possibility of connecting steam, everythi...

Coal stove, by Danstoker 800 KW

• used

Furnace with a heating capacity of 800 KW 1984 Stove automatically controlled including fuel feeder Stove in use until the summer of 2025, to be seen in Germany by appointment, welcome

2001 Gas forced circulation hardening furnace

• used

• Manufacturer: FAIRBANK BREARLEY

Chamber furnaces are designed for heat treatment of materials (mainly heat improvement of steel: hardening and tempering). Thanks to their robust construction, high reliability and a wide range of sizes and acces...