Used Reis Sheet Metal Processing

40 TON REIS SPOTTING PRESS Z25020

• Manufacturer: Reis
• Model: TUS-90

40 TON 24" STROKE 48" X 36" RAM 48" X 36" SLIDE OUT BED 40.5" DAYLIGHT 36.5" BETWEEN POST FLIP DOWN UPPER PLATTEN (BOOKING) HYDRUALIC TILT ON ROLL OUT TABLE UP ACTING 1974

112 TON REIS SPOTTING PRESS Z22034A

• Manufacturer: Reis
• Model: TUS

53" STROKE 53" DAYLIGHT 60" X 48" TABLE FLIP OUT UPPER PLATTEN SLIDE OUT BOLSTER T SLOTS RAM AND BOLSTER 4 POST 1984 Estimated Weight: 28,000 lbs Approximate Overall Dimensions: 10’6” L-R x 8.6” F-B x 15’ High

180 TON REIS SPOTTING PRESS Z23047A

• Manufacturer: Reis
• Model: TUS

60" STROKE 104" DAYLIGHT 76.75" X 86.75" BED 74" X 53" BETWEEN POST HY-PRESSURE 200 BAR PN PRESSURE 5 BAR ROLLING BOLSTER 1988 PRESSURE 2000 KN 440 V 84000 LBS APROX.

224 Ton Reis Hydraulic 4 Post Spotting Press z23026

• Manufacturer: Reis
• Model: TUS

Serial#04.023.00 Capacity: 224 Ton Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Stroke: 106” Dayllight Opening: 118” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force ...

REIS TUS 180 OK-200 DOWN ACTING 4-POST HYDRAULIC SPOTTING PRESS Z23100YYY

• Manufacturer: Reis
• Model: TUS

60" STROKE 104" DAYLIGHT 76.75" X 86.75" BED 74" X 53" BETWEEN POST HY PRESSURE 200 BAR PN PRESSURE 5 BAR ROLLING BOLSTER T SLOTTED RAM AND BOLSTER 1988 PRESSURE 2000 KN 440 V 84,000 LBS APROX

2004 Reis TUS-130

• Manufacturer: Reis
• Model: TUS-130

Tonnage 112 ton Stroke 67″ Clamping Platen Area 53.5″ (Front-Back) x 35.4″ (Left-Right) Catalog Retraction Force 45.9 Ton Swing Down Ram 180 Degrees Overall Height 221″

REIS - TUS 130 - 200

• Manufacturer: Reis
• Model: TUS-130

HIGH Speed version faster in approach/work/return Hydraulic table ekjector Hydraulic feed table Home position rotation left 0 - 90 Gr Home position rotation right 0 - 90 Gr Extended die height 2400 mm BIG Table...

REIS - TUS 90 OK-40

• Manufacturer: Reis
• Model: TUS-90

Work load 7000 Kg Rotation table load 3500 Kg Table height over floor 665 mm Upper mould half can be freely swiveled out up to 180 Gr. Lower mold half can be swiveled hydraulic using push button Lower mould tilta...

1973 REIS TUS 60-40 T

• Manufacturer: Reis
• Model: TUS-60

Additional information Little-used and very well-preserved spotting press with extendable table and 180° foldable ram Accessories Test spraying device, operating instructions

2002 REIS TUS 130-200

• Manufacturer: Reis
• Model: TUS-130

pressure 200 t table length 1600 mm table width 1300 mm dayligth 1700 mm total power requirement kW weight of the machine ca. 19 t dimensions of the machine ca. 2,95 * 5 * 6 m

2013 REIS TUS 400-250 Spotting Press

HYDRAULIC PRESS FOR DIE SPOTTING IN 4-COLUMN DESIGN - Moving bolster with max. 100 ton payload - Swivel carriage with max. 50 ton payload - Swivel area 180° - Table area 4000 x 3000 mms - SICK Light barrier in th...

1991 REIS TUS 60 OK 20

• Manufacturer: Reis
• Model: TUS-60

pressure 20 t table length 670 mm table width 570 mm total power requirement 8 kW weight of the machine ca. 4 t dimensions of the machine ca. 2 x 2 x 3 m No. 2886 Spotting press 200 kN RICE TUS 60 OK 20 Stro...

1974 REIS TUS 90 OK 40

• Manufacturer: Reis
• Model: TUS-90

pressure 40 t table length 1280 mm table width 900 mm total power requirement 7 kW weight of the machine ca. 8 t dimensions of the machine ca. 3 x 2 x 3,6 m m No. 5282 Spotting press 400 kN REIS TUS 90 OK 40 ...

PRESS WALTER REIS TUS 160

• Manufacturer: Reis
• Model: TUS-160

Technical specifications (approx.) Pressing force: 160 tonnes Table area: 1550 x 1800 mm Opening height up to 1800 mm Lower table load capacity up to 20t Turntable load capacity up to 6t Swing over bed: 400 mm Sw...