Used instruments in Gauteng, South Africa

TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...

TESCA Wiring Specimen Board

Wiring specimen board have been designed specifically to study different types of cables & wires. With help of this trainer student can make easy understanding with different kind of wires & cables. It consists f...

Probe for 3 kHz to 100 MHz

The TBCCP1-3K100 is a coaxial RF current monitoring probe, expanding the Tekbox product range of affordable EMC pre-compliance test equipment. The probe has a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat ...

Coupling Decoupling Network M1

The TBCDN-M1 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M1 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

ShinewayTech OPM-50 Intelligent Optical Power Meter

OPM-50 Seires paired with SLS-50 Seires Intelligent Stabilized Laser Source can be used to identify fiber, measure attenuation and loss, verify continuity and evaluate fiber link transmission quality. ●Automatic ...

ShinewayTech OPM-15A -70~+10dBm Optical Power Meter

Grandway FHP2B04 Optical Power Meter ::: -50 to +26dBm

Optical Power Meter -50 to 26dBm Calibrated wavelength: 850/1300/1310/1490/1550/1625nm | Detector type: InGaAs | Accuracy: ±0.2db±1nW | Resolution: 0.01dB | Linearity: ±5% | Auto power-off: Yes | Back-light: Yes ...

Astronics R8600 | Radio Test Hub

The R8600 Radio Test Hub is designed to meet the demanding requirements of RF production environments. Able to withstand 150 Watts of continuous RF power input, the R8600 was explicitly engineered to provide a co...

Chauvin Arnoux PEL103 | Power and Energy Loggers

• Manufacturer: Chauvin Arnoux

Ergonomic, magnetized and suitable for all types of cabinets, PEL103 loggers provide all the power and energy measurements simultaneously.

Chauvin Arnoux CA6416 Clamp-on Ground Resistance Tester

• Manufacturer: Chauvin Arnoux

Chauvin Arnoux CA 8345 | POWER ANALYSER

• Manufacturer: Chauvin Arnoux
• Model: CA 8345

The CA 8345 is a Class A Qualistar power and energy quality analyser. Like the Qualistar+ models, it is equipped with an intuitive HMI and remains simple to use. Multilingual online help can be displayed at any t...

Deviser EP310 Series PON Power Meter

The EP310 is a passive optical network (PON) power meter that enables users to quickly validate PON network installations. It measures 3 wavelengths (1310/1490/1550 nm) at once, with user-defined limits and USB d...

TBOH01 5 µH, 10A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025

• Manufacturer: LiSN

The TBOH01 5uH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz. The LISN is inserte...

TBMR-110M EMI-ANALYZER DC-110 MHZ

• Manufacturer: EMI

International EMC Standards require various spectrum measurement methods and equipment to ensure that the EUT´s electromagnetic emissions do not exceed the specified limits. The TBMR-110M EMI Analyzer is designed...

TESCA Synchronization Panel Trainer

46622 in industry loads are directly connected to the source through an isolation switch. But when the load demand is increased and the source capacity is less, another source is connected in parallel so that bot...