Used Rams in California, USA

POWER FLANGER RAMS 20 GA. STANDALONE w/AutoAdjust

• Manufacturer: Rams

cabinet. The RAMS-2007-AA Power Flanger will form a 7/32" right angle flange on either straight or curved pieces. The Auto Adjust feature self adjusts from 20ga-26ga. No Manual adjustment needed. It has an adjust...

9 STND RAMS AUXILIARY MACHINE

• Manufacturer: Rams

The RAMS 2014 Auxiliary Machine is like no other machine available on the market today. Features a 5 HP motor 208- 230V single phase. It was designed specifically for ease of use, flexibility and the convenience ...

ROTARY FORMER RAMS POWER 14 GAUGE

• Manufacturer: Rams

MACHINE COMES WITH (3) ROLL SETS OF YOUR CHOICE! This machine is capable of producing Beading, Crimping, flanging and other specific functions. Aside from our competitors, the RAMS 2019 has several beneficial use...

DRIVE CLEAT NOTCHER RAMS 20 GA

• Manufacturer: Rams

Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades. Blades can be flipped over to use other side. MADE IN THE USA!...

CLEATBENDER RAMS 24" X 20 GA.

• Manufacturer: Rams

A manually operated tool that forms uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustment. The upper handle forms the cleat and the lower handle opens the tool for easy removal...

SLITTER RAMS 16 GAUGE TABLE-MOUNT

The highlight of this machine is the THK Bearing Slide Rail for effortless one hand adjustment. There is also an easy read scale and the adjustable top cutter eliminates the need for shims. The unit comes with a ...

8 STND RAMS S & DRIVECLEAT MACHINE

• Manufacturer: Rams

The unit comes with a 3 H.P. electric motor, 115/208-230V, 1,725 RPM. Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet is heavy gauge steel with a Hammertone Green F...

POWER FLANGER RAMS 20 GA. STANDALONE FLOOR

• Manufacturer: Rams

This unit comes mounted in a heavy duty cabinet. The RAMS- 2007 Power Flanger will form a 7/32" right angle flange on either straight or curved pieces. It has an adjustable "auto guide" which can be set to automa...

5 STND RAMS 24 GA. PITTSBURG PORTABLE

• Manufacturer: Rams

FEATURES: * Equipped with Pittsburg Roll * Torrington Needle Bearings * Hardened Steel components throughout (62 Rockwell) * Illuminated on/off switch * Hardened Steel Guide Rolls The unit comes with a 1/2 H.P. e...

EASY EDGER RAMS HAND FLANGER 20 GA.

• Manufacturer: Rams

7/32" Hand Flanger (for Duct Elbows) for inside or outside radius, unique design using Torrington Needle Bearings. Hardened Rollers. Bench mounted with "EZ Edge Finger" FEATURES: * Torrington Needle Bearings * Ed...

RAMS 5' x 20 GA DUCT BEADER

• Manufacturer: Rams

DRIVE; CHAIN The key features include an adjustable depth setting and uniformed "V" Beads 12" on center. The cabinet is a heavy duty steel with a Hammertone Green finish. MADE IN THE U.S.A.!!

5 STND RAMS 20 GA. PITTSBURG FLOOR

• Manufacturer: Rams

This unit comes with a 1 HP electric motor, 110-115V single phase. We use Torrington Needle Bearings and hardened steel components throughout, (62 Rockwell). The cabinet is heavy gauge steel with a Hammertone Gre...

CHEEKBENDER RAMS US MADE 24" X 20 GA

• Manufacturer: Rams

bend. It features Torrington Needle Bearings as well as a Roller Guide along the length of the entire piece. FEATURES: * Torrington Needle Bearings * Two Handle Positions Available * Roller Guided End Plate OPTIO...

5 STND RAMS 20 GA. 'HYPER/SUPER SPEED' PITTSBURG FLOOR

• Manufacturer: Rams

The unit comes with a 3 H.P. electric motor, 115/208-230V, 1,725 RPM. Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet is heavy gauge steel with a Hammertone Green Fi...

POWER FLANGING ATTACHMENT RAMS FITS 20 GA. RAMS PITTS MACHINE

• Manufacturer: Rams

The unit can be mounted to the RAMS 20 Pittsburgh machine. It makes a 7/32" right angle flange on either straight or curved pieces. It has an adjustable "auto-guide", which can be set to automatically hold the me...