Building Filters
QCM QMB4016C Four-side Moulder(5 spindles)
new
- Manufacturer: QCM
Cutter dia. Note: all above pictures and parameters are subject to the real product. We reserve the right to improve the product.
Meishan, China
QCM QM6020G Four-side Moulder（six spindles）
new
- Manufacturer: QCM
Product introduction: 1. The machine body(frame) is made of cast iron, and the worktable is covered with hard chrome, wear resistant. 2. Equipped with 2 sets of cylinder-floating bottom active rollers in front of...
Meishan, China
QCM QMX8025M Double-end Tenoner（8 spindles）
new
- Manufacturer: QCM
I. Model：QMX8025MDouble-end Tenoner（8 spindles） II. Product Use： This machine is used for double-end edge trimming and tenoning. The maximum working width is 2500mm, maximum working thickness is 120mm. The back t...
Meishan, China
QCM QMB620AT Four-side Moulder(6 spindles)
new
- Manufacturer: QCM
Note: all above is for reference. We reserve the right of improving the parameter and appearance of this product.
Meishan, China
QCM QMB620RL Four-side Moulder（4 vertical spindles）
new
- Manufacturer: QCM
ntroduction: 1. The machine body(frame) is made of cast iron, and the worktable is covered with hard chrome. 2. Six cutter spindles, but four of them are vertical spindles. 3. Equipped with two sets of cylinder f...
Meishan, China
QCM QMB525DH Automatic Woodworking Planer (Double Angle Type)
new
- Manufacturer: QCM
QMB525DH One-side Planer(bottom spindles) Main Features： 1. The machine bed(frame) is made of iron casting, stable and strong; 2. Synchronously lifting with four columns; 3. Have two oblique cutter spindles, with...
Meishan, China
QCM QMB723R / QMB623R Four-sided woodworking planer
new
- Manufacturer: QCM
Main features: 1. The machine adopts an integral casting body, which has stable performance, precision and good rigidity; 2. Fully enclosed safety cover and power failure protection for door opening, low working ...
Meishan, China
QCM MSK3710-4 CNC Mortiser
new
- Manufacturer: QCM
For more details, please contact us. Here are some samples as below: Note: all above pictures and parameters are subject to the real product. We reserve the right to improve the product.
Meishan, China
QCM QMB523A Four-side Moulder(5 spindles)
new
- Manufacturer: QCM
QMB523A Four-side Moulder(5 spindles) Working width(cutter dia.φ125): 20~230mm | Working thickness(cutter dia.φ125): 8~160mm | Min. working length(single): 840mm | Min. working length(back to back): 280mm | Front...
Meishan, China
QCM QMB516ET Four-side Moulder(5 spindles)
new
- Manufacturer: QCM
Note: The above pictures and technical parameters are subject to change.
Meishan, China
QCM SRP1300B Double Wide belts Sanding Machine
new
- Manufacturer: QCM
I.Model：SRP1300B Double Wide belts Sanding Machine II.Product Use： This machine has two group sanding units. The first group is for thickness setting, the second group is for fine sanding and polishing. Its max. ...
Meishan, China
QCM QMB616FT Four-side Moulder(6 spindles)
new
- Manufacturer: QCM
Note：the above appearance and technical parameter all are subject to the real product.
Meishan, China
QCM QMB412D Four-side Moulder(4 spindles)
new
- Manufacturer: QCM
Note: all above pictures and parameters are subject to the real product.And we reserve the right to improve the product.
Meishan, China
QCM MXK3155A / MXK3170A / MXK3190A Dovetail Joint Machine
new
- Manufacturer: QCM
For more details, please contact us. Note: all above pictures and parameters are subject to the real product. We reserve the right to improve the product.
Meishan, China
QCM QMB206F-GH Double-side Planer(high pseed)
new
- Manufacturer: QCM
With spiral cutter heads and inverter for feeding speed control. For more details, please contact us. Note:all above pictures and parameters are subject to the real product. We reserve the right to improve the pr...
Meishan, China