Used Drilling Rigs in Marche, Italy

TES CAR ROTARIES

• Manufacturer: Tes Car

Hydraulic rotaries for piling and micro-piling rigs, oil bath or grease bath, with a torque up 2,5 kNm to 120 kNm.

TES CAR CF3 S PLUS

• Manufacturer: Tes Car

Hydraulic drilling machine CF3 S PLUS Equipped with a special tower divided into 3 telescopic sections with a counter-slide device to lower the tower unit to the ground and reach the minimum working position of 3...

TECNIWELL TW CJV

• Manufacturer: Tecniwell

Used TECNIWELL TW CJV Available

SAICI SCP 750

• Manufacturer: Schwing

Used CFA Concrete pump SAICI SCP 750 Available Output: 75 lt/m

TES CAR TT8 CFA

• Manufacturer: Tes Car

* with expanding tracks Torque: 80 kNm | Engine power: 80 kW | Max depth: 12 - 16 m | Max diameter: 800 mm | Total weight: 25 t

TES CAR CF1

• Manufacturer: Tes Car

Hydraulic piling rig CF2 Provided with a special mast divided in two sliding sections with pull-down force given by the counter-slide device to lower the mast group and achieve the lowest headroom working positio...

TES CAR CF6

• Manufacturer: Tes Car

Hydraulic rig CF6 The CF6 in diaphragms mode can use the exhisting kelly bar of the standard version for bored piles, adding the diaphragms kit. Alternatively the rig can be equipped with a square kelly for a bet...

TES CAR CF6 R

• Manufacturer: Tes Car

Hydraulic piling rig CF6 R The CF6 R is provided with a special kit for road rail made by steel wheels to move on the rails.

2004 BAUER CFA KIT FOR BG 36

• Manufacturer: Bauer
• Model: BG36

Used CFA Kit suitable for Bauer BG 36 Available Complete with: - Main winch traverse for rope - Hydraulic auger cleaner - Starter auger flat teeth - Starter auger rock soil - CFA Auger 5m - CFA Auger 5.5m - Rule...

TES CAR TT10 CFA

• Manufacturer: Tes Car

Torque: 100 kNm | Engine power: 86 kW | Max depth: 14 - 18m | Max diameter: 800 mm | Total weight: 28 t

TES CAR TT5 CFA

• Manufacturer: Tes Car

* with expanding tracks Torque: 50 kNm | Engine power: 54 kW | Max depth: 12 m | Max diameter: 600 mm | Total weight: 14,5 t

TES CAR EXTREME LOW HEADROOM - (under 3000mm / 10 ft)

• Manufacturer: Tes Car

CF1 CF2 CF2.5 COMPACT CF3S PLUS

TES CAR TT5

• Manufacturer: Tes Car

TES CAR CFA AUGERS

• Manufacturer: Tes Car

Continuous flight augers with inner passage from 2" to 6", provided with hexagonal joints and toothed point with cap and chain.

TES CAR TREMIE PIPES

• Manufacturer: Tes Car

Joint Ø273 - Pipe Ø244 Joint Ø244 - Pipe Ø219 Joint Ø219 - Pipe Ø194