Machine Tools » Punch Machines » Bavaria

Building Filters

29

Used Punch Machines in Bavaria, Germany

Trusted Seller
Label punching machine
- Manufacturer: Edale
2 punching units with numerous accessories
Bamberg, Germany
Trusted Seller
Auction
1989 AMADA Aries 245 CNC Punching Machine
- Manufacturer: Amada
- Model: ARIES-245
- Maximum thickness: 4 mm
Punching force 200 kN, 1 high tool turret with 20 tool positions, 2 rotatable tool stations (up to diameter 31.7 mm), machine and table mounted on steel plate, with safety stepping floor, incl. PC and PC cabinet,...
Bad Heilbrunn, Germany
Visit Auction Website
Auction
1989 AMADA Aries 245 CNC Punching Machine
- Manufacturer: Amada
- Model: ARIES-245
- Maximum thickness: 4 mm
Punching force 200 kN, 1 high tool turret with 20 tool positions, 2 rotatable tool stations (up to diameter 31.7 mm), machine and table mounted on steel plate, with safety stepping floor, incl. PC and PC cabinet,...
Bad Heilbrunn, Germany
Visit Auction Website
1992 KUNZ/Boschert KST 20/450 punching machine
- Manufacturer: Boschert
- Maximum thickness: 6 mm
- Punch diameter: 105 mm
Used KUNZ/Boschert punching machine with Trumpf tooling system, manual tool change, tools with PU wipers, machine including numerous round, square, slotted, and separating punching tools, including tool presettin...
Hohenbrunn, Germany
Trusted Seller
Auction
HAHNDORF M III/B-SO Pipe notches with foot actuation
HAHNDORF M III/B-SO Pipe notches with foot actuation
Reichertshofen, Germany
Visit Auction Website
1964 Edel RM 25/210/12 revolver hole punch
- Manufacturer: Edel
- Maximum thickness: 3 mm
- Punch diameter: 55 mm
Used Edel revolver punch press, with 12 stations, Diameters in mm: 35 x 4/47/50.5 x 14/8 x 37/48/ and other punches and dies. The machine will be professionally repaired, tested, and cleaned, and will then be f...
Hohenbrunn, Germany
Trusted Seller
GEKA PUMA 55 SD
- Manufacturer: Geka
- Model: Puma 55
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 55t | Hole diameter in sheet thickness: Ø 40 in 10mm | Throat: 750mm | Stroke...
Günzburg, Germany
Trusted Seller
GEKA PUMA 55 S
- Manufacturer: Geka
- Model: Puma 55
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 55t | Hole diameter in sheet thickness: Ø 40 in 10mm | Throat: 500mm | Stroke...
Günzburg, Germany
Trusted Seller
GEKA PUMA 110 S
- Manufacturer: Geka
- Model: Puma 110
- Maximum thickness: 10 mm
- Punch diameter: 55 mm
Accessories / equipment: - punching table Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 110t | Throat: 500mm | Engine output: 9kW | No. of strokes: 28Hub/min | Strok...
Günzburg, Germany
Trusted Seller
2001 TRUMPF TruMatic 5000 R (S01)
- Manufacturer: Trumpf
- Model: Trumatic 5000
- Maximum thickness: 8 mm
Control: Siemens | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Plate thickness: 8mm | Punching capacity: 220kN | Working area: 3000x1500mm | Weight of the machine approx.: 17500...
Günzburg, Germany
Trusted Seller
2004 TRUMPF TruMatic 5000 R
- Manufacturer: Trumpf
- Model: Trumatic 5000
- Maximum thickness: 8 mm
Control: CNC - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Punching capacity: 220kN | Plate thickness: 8mm | Working area: 2535x1280mm | Sheet thickness for stainless steel: 4...
Günzburg, Germany
Trusted Seller
GEKA Hydracrop 80 S
- Manufacturer: Geka
- Model: Hydracrop
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Round bar steel: 45mm | Square edge steel: 45mm | L-beam: 12mm | Flat steel: 450x15mm | L-beam 90°: 152x152x13mm | Weight of the...
Günzburg, Germany
Trusted Seller
GEKA Hydracrop 55 S
- Manufacturer: Geka
- Model: Hydracrop
Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. standard punching device - Stamp quick release device for p...
Günzburg, Germany
Trusted Seller
GEKA Multicrop 45
- Manufacturer: Geka
- Model: Multicrop
Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectan...
Günzburg, Germany
Trusted Seller
GEKA Hydracrop 110 S
- Manufacturer: Geka
- Model: Hydracrop
Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. standard punching device - Stamp quick release device for p...
Günzburg, Germany

12

Overview

Punch machines are essential for metalworking operations, used to create holes, shapes, and indentations in various materials such as sheet metal. These machines can be manually operated or CNC-controlled to achieve precise and consistent results, making them ideal for manufacturing, fabrication, and industrial applications.

FAQ

What factors should I consider when buying a punch machine?

Consider the machine's punching capacity, control system (manual or CNC), tooling options, and overall condition. Check for any signs of wear and tear and request maintenance records if available.

How can I ensure my punch machine is shipped securely?

Use a reputable shipping service that specializes in heavy machinery. Ensure the punch machine is properly disassembled, if necessary, and securely packaged to prevent any damage during transit.

What is the maintenance routine for a punch machine?

Regular maintenance includes lubricating moving parts, inspecting and replacing worn-out tooling, checking hydraulic systems, and ensuring all safety mechanisms are functioning correctly. Refer to the manufacturer’s maintenance manual for specific guidelines.