Used Punch Machines in Australia

Geka Hydracrop 80 Dual Cylinder Punch and Shear

• Manufacturer: Geka
• Model: Hydracrop

Used Geka Punch And Shear Dual Cylinder, two foot pedals Comes with Touch and Cut Multiple Punch and Dies Pipe Notching Attachment Made in Spain The GEKA HYDRACROP 80S is built for high-speed, high-capacity produ...

Punch and Shears

Kippen 55-ZE 55ton 2 station punch and shear Capacity: Punch : 32mm in 13mm/38mm in 10mm Shear: Flat 300mm x 16/200mm x 20mm Angle 127mm x 127mm x 12mm Section: Round and Square 40mm Notch: 45mm x 95mm x 10mm Wit...

2005 Kingsland Compact 45

• Manufacturer: Kingsland
• Model: COMPACT 45

Kingsland Compact 45 Punch: 22mm x 15mm/38mm x 8mm Shear: Flat 200mm x 15mm/300mm x 12mm Angle 100mm x 10mm Round 30mm Square 30mm Notch: 8mm Selection of punch and dies, 3kw 415volt motor Operators manua...

Kippen 55-ZE

• Manufacturer: Kippen

Kippen 55-ZE 55ton 2 station punch and shear Capacity: Punch : 32mm in 13mm/38mm in 10mm Shear: Flat 300mm x 16/200mm x 20mm Angle 127mm x 127mm x 12mm Section: Round and Square 40mm Notch: 45mm x 95mm x 10...

1991 AMADA PEGA 357

• Manufacturer: Amada
• Model: Pega-357
• Maximum thickness: 4 mm

Amada Vipross 357, 1991, 58 Station Turret, 2 Auto Index B Stations, auto Clamp positioning. 357 is Currently working in Australia and can be viewed any time.

1991 AMADA PEGA 357

• Manufacturer: Amada
• Model: Pega-357
• Maximum thickness: 4 mm

Amada Pega 357 with LKI 300 Sheet Loader, 58 Station 2 Auto Index Turret, O4PC Controller. Machine is in excellant condition and can be viewed operating.

Geka punch and shears

• Manufacturer: Geka

100 ton hydraulic cut angles , flat plate ,round and square bar and knotches with punch and dies Don't miss out Inspection recommended

Omera punch and sheers

• Manufacturer: Omera Punch and Sheers

Mechanical multi matic, 16/7os. Punches, angle and flat bar cutting with lots of punches and dies. Needs foot pedal Don't miss out Inspection recommended

Geka 110 Punch and shears

• Manufacturer: Geka

geka 110 hydraulic punch and shears as new with punches and dies Don't miss out Inspection recommended

Geka 13H Punch and shears

• Manufacturer: Geka

Geka 13h mechanical punch and shears with punches and dies Don't miss out Inspection recommended

KANG INDUSTRIAL DIMPLE DIE SET, Sheet Metal Hole Punch and Flare Dimple Die Set

• Manufacturer: Kaka

Made from strong 4140 alloy Shank size 19mm 8 different sizes available, 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4" ,2" & 2-1/2" Work with 20 Ton hydraulic shop press or equivalent

Kang Industrial PTN-30, Pipe & Tube Notcher, Hole Saw Notcher, Max. 76.2mm OD Tube

• Manufacturer: Kaka

Suit 12.7-76.2mm OD tube, and 15NB to 40NB Pipe Runs on 240V power, single phase Notches 12.7-76.2mm tube and 15NB to 40NB Pipe, Schedule 40 Pipe Adjusting the notching angle up to 220 degrees A large degree whee...

Kang Industrial JB23-25 Mechanical Press, 25 Ton C Frame Press Machine, Inclinable Punching Machine

• Manufacturer: Kaka
• Maximum thickness: 50 mm

Economic Press Machine, 25-Ton Pressure C frame, the inclinable body can slide the material and scrap easily Cast iron body, stable performance Suitable for blanking, forming, curving, and flat stretching on punc...

Geka Hydracrop Punch Machine

• Manufacturer: Geka
• Model: Hydracrop

Good condition Geka Hydracrop Punch Machines available between 2004 and 2006 years. Located in Germany and other countries. Click request price for more information.