Used Processing in Ontario, Canada

Hibon rotary lobe blower

• Manufacturer: Hibon

CATEGORY: Blowers/ fans Model SNH822 Serial 16170200 125 hp, 460 volt belt drive 3000 cfm @ 13"

GAST Regenerative Blower

• Manufacturer: Gast

-Manufacturer: GAST MFG Corp. -Blower: Model, R1102 -CFM OPEN 60/50 Hz -SN: 0592 -At 60 Hz: -Max pressure: 28.5 in H2O -Max Vacuum: 26.5 in H2O -At 50 Hz: -Max Pressure: 21 in H2O -Max Vacuum: 20 in H2O -Inlet/ o...

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Read co. Continuous Mixer

• Manufacturer: Read

-master motor:1/3 HP -1 Phase -.4 AMPS -1725 RPM -115 v -z blades

Hibon blower

• Manufacturer: Hibon

-Model 2051-HCZ -Serial 5V015-63 -230/460 volt @ 1750 rpm -3 IN STOCK

590 Litres Closed top plastic tank

-Closed top with manhole opening -Flat bottom -Measurements on side in us gallons -2"nipple on the side at the bottom -1" nipple on the side at the top 53.5" tall -30" diameter -130 imp gall

0.33 HP Clamp-on Agitator

-Comes with Genesis AC motor speed control hybrid drive -Shaft diameter: 3/4" -Baldor Reliance Motor: -HP: 0.33 -Volts: 230/460 -Amps: 1.6/0.8 -RPM: 1725 -Hz: 60 -Phase 3

Steel filter housing

Shipping dimensions: Height - 10" x Width - 7" x Length - 7 1/2" Input / output - 1 1/2" (1 Of 2)

Small Dust Collector

-Model: T4-LC -MFG number: 406557 -Induction motor: -HP: 1 -Volts: 115 -Phase 1 -Hz: 60 -Amp: 10 -Pole: 2 -RPM: 3450

Flame arrest

-Shipping dimensions: 20" L x 16" H x 9" W Characteristics: Industrial Process + Tanks, Steel, Used | Price (cdn$): $200.00

Fan and Blower

• Manufacturer: Universal Fan and Blower

Characteristics: Industrial Process + Tanks, Steel, Used | Price (cdn$): $480.00

Black steel filter housing

Shipping dimensions: Height - 6 1/2" x Width - 7" x Length - 7 1/2" Input / output - 1 1/2" 1 of 2

Stainless Cartridge Filter

-Shipping dimensions: length 12" x width 15" x height 41" -Input / output - 2" -Drain - 1"

Pneumatic Clip on Mixer

-Clip on -Length of mixer shaft: 76" -Prop: 316 stainless steel -Width of prop: 6"

Drag conveyor

-Total shipping dimensions L- 69” W- 48” H- 55” -Inlet- 6.5” Outlet - 4” Access hatch -16.5”x 20” -Motor info HP- 7.5hp Volts - 575v RPM- 1750 PH- 3 Sew Eurodrive Ratio - 86.34:1