Used Processing in New Jersey, USA

2000 ALLOY FABRICATORS 2,200 gallons

• Manufacturer: Alloy

Used Approximately 2,200 Gallon 316L Stainless Steel Jacketed Mix Tank Manufacturer: Alloy Fabricators Capacity: 2,200 gallons Year: 2000 Internal pressure: 15 psi @ 120°F Jacket pressure: 85 psi @ 120°F Dimensio...

ALLOY FABRICATORS 1,000 GALLON

• Manufacturer: Alloy

Used Approximately 1,000 Gallons Stainless Steel Reactor with Coils Manufacturer: Alloy Fabricators Capacity: 1,000 gallons Internal pressure: 33 psi @ 335°F Material of construction: 304 stainless steel Dimensio...

PACKO 100 Litre

• Manufacturer: Packo

Used Packo approximately 100 litre stainless steel vertical reactor. Unit measures approximately 460mm diameter x 580mm straight side. Unit has welded dished bottom and welded dished top. Internal rated 5.5 bar m...

SK MFG WV-50KG

• Manufacturer: SK MFG

Used Approximately 13 Gallon Stainless Steel Reactor Capacity: 13 gallons Manufacturer: SK Model: WV-50KG Internal pressure: 45/FV @ 250°F (3 bar @ 123°C) Jacket pressure: 60FV @ 300°F (4 bar @ 150°C) Bottom driv...

PSV 4000 Litre

• Manufacturer: PSV

Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures ap...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221213

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

Centrifuge-Disc Bowl 1.5 kW (2 HP) Stainless Steel 316 - IPP# 99783

• Manufacturer: Alfa Laval

laboratory separator disc centrifuge. Speed 3500 - 10000 rpm Throughput 200-600 ltr/hr Openings: liquid/solids outlet 3-1"; feed (process) 1-1/2"; operating liquid 3-1/2"

IPP# 602139, Urea Prill Fertilizer and Agrochemical

Chemico Design – Conventional 1000 STPD Nameplate CO2 Compression – Centrifugal followed by reciprocating Urea Reactor – Unocal/Stamicarbon conventional design (1992) Urea Concentration – Crystallization, Crystal...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221284

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange. Requires 2...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221281

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange Requires 2....

Pump-Vacuum - IPP# 208379

• Manufacturer: Wiegand

Steam injection 4 effects with ceramic pistons and VICARB Carbon Block Heat Exchanger, Serial Number 1296, rated -1/3 bar @ 150 degrees C Service Side, volume 16 liter; -1/3 bar @ 150 degrees C process side, volu...

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: GEA

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...

Packed Column - IPP# 222789

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...