Used Forging

80 tonne Heavy Duty Asian Built Oil Hydraulic

• Manufacturer: Asian Built

Still installed and available for immediate inspection and delivery.

1986 25 ton Pahnke FM 25/64 Rail Bound, Max tongs

• Manufacturer: Pahnke

Lift tons: 25 tonnes | Max rds: 1,473 mm | Min rds: 609 mm | S-shift: 250 mm | Vertical stroke of tongs parallel to floor: 800 mm | Rail centers: 3,750 mm | Max turning circle of fully opened tongs: 2,058 mm | L...

50kj Beche KGH 5.0B Short Stroke Hydraulic Die Forger

• Manufacturer: Beche

Additional info: The line consists of: - 50KJ Beche hammer - 150 t trimming press - Induction heater Max blows with nominal blow effect - 99 bpm Useful blows with nominal blow effect - 45 bpm Slide stroke - min 5...

2020 CARER R45H2 AGV SPED 9,920 lbs capacity Remote controlled

• Manufacturer: Carer

Lift tons: 4.1 tonnes

1989 Demag HSP 630/1600 63 tonne Carrying

• Manufacturer: Demag

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

1976 1 tonne Dango & Dienenthal model AMP 1000

• Manufacturer: Dango & Dienenthal AMP 1000

Lift tons: 1 tonnes | Max rds: 400 mm | Min rds: 100 mm | Model number: AMP 1000

26,400 lb (12 tonne) Lasco KGK 1600 Electro-

• Manufacturer: Lasco

Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...

2,900 kg Lasco model KH 315

• Manufacturer: Lasco

Size: 2,900 kgs | Stroke: 1,100 mm | Ram l-r: 700 mm | Ram f-b: 700 mm | Anvil l-r: 700 mm | Anvil f-b: 700 mm

100 ton Clearing HG-100-25 C-Frame

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

500kW Interpower 2-1/4" to 6" Induction Billet Heater,

Description: 500kW Interpower 2-1/4" to 6" Induction Billet Heater

1,000 ton OWZ 16" Bar diameter

Additional info: Model - HRW-1000 Working Range: Rounds: Ø 100 – 400 mm Squares: 400 x 400 mm Straightness of the bar Ø 320: 10 – 45 mm Ø 210: 10 – 25 mm Ø 130: 15 – 40 mm Ø 90: 25 – 40 mm Weight of the bar -...

1980 440 ton 3-1/2" dia Peddinghaus Caddy 80 Bar

• Manufacturer: Peddinghaus

Additional info: Cutoff capacities at material tensile strengths: Rounds: psi 65,000 - 3.500" psi 92,000 - 3.156" psi 121,000 - 2.750" Squares: psi 65,000 - 3.937" psi 92,000 - 3.562" Flats: psi 65,000 - 7" x 1.3...

1980 1,200 ton National model 6-4 Heavy

• Manufacturer: National

Complete with: Spare parts as follows : (1) Main Electric Motor (2) Adjusting Wedges (1) Upper transfer finger assembly (1) Lower transfer finger assembly (1) Die Block clamping piston This National 6-4 was used ...

3,500mm Asian Built Radial Axial Ring Rolling Mill Re:24925

• Manufacturer: Asian Built

Dia: 3,500 mm | Height: 800 mm | Builder: Asian Built | Radial: 280 tonnes | Axial: 180 tonnes | Min dia: 650 mm | Number of main roll motors, current type & power of each: One DC @ 500kW | Number of axial roll ...