Used Processing in New Jersey, USA

Cytiva 6098 Column - IPP# 239339

• Manufacturer: Cytiva

2000 Liter/Hr., 316 SS, polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE- ATKA system # 6098 6 inlets, 4 outlets, two column connection, five head diagram pumps. Rated for 6 b...

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: Disco

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...

Packed Column - IPP# 222790

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Packed Column - IPP# 222789

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...

- IPP# 211968

• Manufacturer: Airoil-Flaregas

Airoil-Flaregas F.C.10 flare tip, Pilots Derrick supported Flare stack, Customer ref #62/3336085/2H1/ON, The FC.10 flare tip inclusive of the Flarex molecular seal, Derrick supported flare stack and Knock out dru...

Major Items Plastic Stainless Steel 316 - IPP# 205765

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Major Items Plastic Stainless Steel 316 - IPP# 205766

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer cutter the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Me...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...

Sterilizer - IPP# 207687

Designed for pass thru loading and unloading, with quick open doors front and back. Original Installation to a clean room 316 SS lined chamber Modified and re-rated in 1993 by Industrial Fabricating and Engineeri...

Tubular Reactor Stainless Steel 316 - IPP# 232538

• Manufacturer: Snowtech Hydro Cracker & Fisher Tropsch

Pilot plant, including an Agilent Tech Model 7890A-GC. Designed to operate at up to 725 psig and 572 degrees F in the auxiliary process vessels and 932 degrees F in the reactor tubing. The current set up includes...

Stainless Steel 316L Centrifuge-Lab - IPP# 239308

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Lab Centrifuge Stainless Steel 316L Centritec Cell 8 - IPP# 239307

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert The system offers these advantages Single use, rapid changeover dispo...

Stainless Steel 317 Andritz SZ400/2 Centrifuge-Pusher - IPP# 232766

• Manufacturer: Andritz

316 stainless steel 5.5 ton/hour troughput of solids 130 degrees C (max) inner diameter of outer basket 412mm, inside diameter of inner basket 356mm cake thickness of outer basket 41mm (max), inner basket 40mm ce...

IPP# 601964, PET Cutter System-(4) cutters-6900 kg/hr max. (ea) Polymers - Fibres and Plastics

PET Cutter System consisting of: (4) Rieter (Maag) Underwater strand pelletizers ( M-USG 900 V) vertical design (providing space savings and easy access to the cutter head) 316 SS contact Each System is Designed ...