Used Machining Centers in Nuevo León, Mexico

FRU-103 UNIVERSAL MILLING MACHINE NO.3 MODEL H1000, TABLE 12" X 63",MAZAK BRAND

• Manufacturer: Mazak
• Model: H-1000

MAZAK (Japan) Universal Milling Machine No.3 model H1000, 12" x 63" table, ISO 50 taper, 16 Speed (33 - 1500 RPM), with automatics and rapids, 10 HP motor, s/n. 12343

MSC-740 MACHINING FLOOR, DIMENSIONS: 1600 MM X 2500 MM, BRAND COLLET AND ENGLEHART

Collet and Englehart (Germany) Machining floor, dimensions: 1600 mm x 2500 mm, with 9 T-slots, s/n. 1418

FADAL 6030 MACHINING CENTER

• Manufacturer: Fadal
• Model: 6030
• Spindle taper: CAT 40

Travel x axis: 60” | Travel axis and: 30” | Travel z axis: 30” | Spindle speed: 10.000 RPM | Spindle cone: Cat 40 | Tool magazine capacity: 20 ATC

MYCENTER KITAMURA 1 MACHINING CENTER

• Manufacturer: Kitamura
• Model: Mycenter 1

Table size: 19.7” x 11.8” | Travel on x axis: 19.4” | Y-axis travel: 14” | Travel on z axis: 16” | Spindle speed: up to 13,000 RPM | Spindle motor: 10 HP | Spindle taper: BT30 | Tool stations: 20 ATC positions

HAAS VF-6 MACHINING CENTER

• Manufacturer: Haas
• Model: VF-6
• Spindle taper: BT 40

X axis travel: 64" | Y-axis travel: 32" | Z axis travel: 30" | Size of the table: 64" X 28" | Maximum table load: 2000 LBS | Spindle motor: 15 HP | Spindle speed: 7500 RPM | Cone: 40 CT | Tool changer: 20 ATC

MYCENTER KITAMURA 2 MACHINING CENTER

• Manufacturer: Kitamura
• Model: Mycenter 2
• Spindle taper: CAT 40

Table size: 16.1” x 35.4” | Paths (x / y / z): 23” x 16.9” x 18” | Table load capacity: 661 lbs | Spindle taper: CAT 40 | Spindle speeds: 150 – 10,000 RPM | Fast forward (x/y/z): 787.4 / 787.4 / 472.4 IPM | Maxi...

EXCEL SMT 350 MACHINING CENTER

• Manufacturer: Excel

Maximum tool diameter: 3.15" Travel x axis: 15.7 " | Travel axis and: 15,7 " | Travel z axis: 14.7 " | Spindle speed: 12.000 RPM | Size of the table: W 30 " | Maximum tool length: 7.78 " | Bar stock capacity: 2.0...

DAEWOO MYNX-500 MACHINING CENTER

• Manufacturer: Daewoo
• Model: Mynx 500

Fanuc Series 21 iM Table: 47.24x19.68 “ | Travel x axis: 40.15” | Travel axis and: 20.06” | Travel z axis: 24.60” | Milling cutter shaft cone: ISO-40 | Speed range: 8,000 rpm

2006 FADAL 4020 MACHINING CENTER

• Manufacturer: Fadal
• Model: 4020
• Spindle taper: CAT 40

Size of the table: 48″ x 20″ | Table load capacity: 3,600 pounds | X axis travel: 40″ | Y-axis travel: 20″ | Z axis travel: 20″ | Fast x/y scrolling: 1,000 IPM | Fast scrolling z: 900 IPM | Tool capacity: 24 | S...

HAAS VF-4 MACHINING CENTER

• Manufacturer: Haas
• Model: VF-4
• Spindle taper: CAT 40

Size of the table: 52″ x 18″ | Maximum table load: 3500 lbs. | X axis travel: 50″ | Y-axis travel: 20″ | Z axis travel: 25″ | Spindle nose to table top: 4″-29″ | Spindle cone: CT40 | Spindle speed: 10 000 RPM | ...

BRIDGEPORT TC1G MACHINING CENTER

• Manufacturer: Bridgeport

Travel x axis: 22” | Y-axis displacement: 16” | Travel z axis: 20” | Spindle speed: 8,000 RPM | Spindle cone: BT 40 | Spindle motor: 10 HP | Tool magazine capacity: 22 ATC

MATSUURA RA-2G MACHINING CENTER

• Manufacturer: Matsuura
• Model: RA-2G

Size of the table: 26,7" x 17,7" (2) | Travel x axis: 25,9" | Y-axis travel: 18,1" | Travel z axis: 19.0" | Cone: CAT 40 | Spindle speed: 15.000 RPM | #!: 20

MATSUURA RA 3G II MACHINING CENTER

• Manufacturer: Matsuura
• Model: RA-3G II
• Spindle taper: BT 40

Table size: 19.25″ x 31.5″ | Travel x axis: 31,5″ | Travel axis and: 20,1″ | Travel z axis: 9,7″ | Spindle speed: 12 000 RPM | Spindle taper: BT40 | Atc: 40

KTM 3VSF MILL POWER G2 (2-axle / 3-axle)

3 HP motor with variable frequency inverter. Spindle RPM: 60-550-4500. Centralized lubrication via check valves. The guide surfaces are hardened and ground (Rockwell hardness c52). Very easy-to-use conversational...

KHV 400

Characteristics: KHV 400 | X-axis displacement (h/v): 19.7″ | Y-axis displacement (h/v): 19.7″ | Z-axis displacement (h/v): 17.8″ | Vertical spindle center to column: 25.7” | Vertical spindle nose to table: 4.9”...