Used Mineral Processing

24 x 8 ft (7.3 x 2.5 m) Hardinge SAG Mill with 3,000 HP

• Manufacturer: Hardinge

- 2 Flender gearboxes - Liners quoted separately - 3,000 HP GE synchronous motor - Mill is disassembled and in storage

24 x 9 ft (7.3 x 2.7 m) Boliden Allis SAG Mill with 3,000 HP

24 x 9 ft (7.3 x 2.7 m) Boliden Allis reconditioned SAG Mill with 3,000 HP (2240 kW) GE motor - Mill shell in 1 section - Inching drive, 3 piece - Feed and discharge ends - Shell and discharge liners - Discharge ...

Equivalent in Performance with Type AH Horizontal Slurry Pumps

- Centrifugal seal - Cast casings and pedestal base - Equivalent to series AH pump - Liners are pressure molded vulcanized rubber - Impellers are rubber, polyurethane and steel are available - Fabricated over-sea...

Type B-6-6 Ash Pump with 100 HP (74 kW) motor

Type B-6-6 Ash Pumps with 100 HP (74 kW) motor - Three units available.

Knelson MD30 Gold Concentrator

• Manufacturer: Knelson

General Model Specifications: Feed Size: Discharge type: Manual Discharge | Bowl: Poly G4 Bowl | Feed capacity: 30-40 Tons/Hr (27.3-36.3 Tonnes/hr.) Solids | Typical fluidization water requirement: 75-110 GPM (17...

Deister No.6 Concentrating Table

• Manufacturer: Deister

Full Size Diagonal Deck MFG. Capacities: Coarse Sand - 2.3 TPH Medium Sand - 1.4 TPH Fine Sand - 0.9 TPH Slime - 0.4 TPH Particle Top Size Coarse Sand - 10 Mesh (2.0mm) Medium Sand - 48 Mesh (0.30mm) Fine Sand - ...

Eimco 4ft x 4ft Disc Filter Package

• Manufacturer: Eimco

Chain Driven With Drive Motor and Gear Reducer Package Includes: Simplex Diaphragm Feed Pump 50HP Spencer Turbo Air Blower 50HP Nash Vacuum Pump Filtrate Pump Filtrate Tank Product Discharge Conveyor

Knelson KC-CD12MS Concentrator

• Manufacturer: Knelson

Complete With: SH12 Screen Hopper Water Filter Spare Parts All Operator’s Manuals General Model Specifications: Max Total Volumetric Throughput: 120 US GPM (27m³/hr.) Feed Size: Typical Cycle Duration:

Knelson KC-MD30 Concentrator

• Manufacturer: Knelson

General Model Specifications: Feed Size: Style: Manual Discharge | Feed capacity: 30-40 Tons/Hr Solids (27.3-36.3 Tonnes/hr.) | Typical fluidization water requirement: 75-110 GPM (17.0-25.0 m³/hr.) | Maximum volu...

5ft x 12ft MBMM Concentrating Tables

• Manufacturer: Mount Baker Mining and Metals (MBMM)

EPDM Table Tops with Machined Grooves Voltage: 120 Volt | Capacity: 4,000-4,500 Lbs./Hour | Drive: 1HP Electric Motor | Recovery: Up To 95% of the Gold to 325 Mesh (50 Microns) or Less

Action Mining Wave Table Package

• Manufacturer: Action Mining

Includes: (2) Action Mining M7 Wave Tables (1) Action Mining M10 Wave Table General Model Specifications: M7 Wave Table: 80-99% of Gold Recovery from Classified Black Sands 92-99% of Gold Recovery From Small Batc...

Action Mining M7 Wave Table

• Manufacturer: Action Mining

80-99% of Gold Recovery from Classified Black Sands 92-99% of Gold Recovery From Small Batches of Classified Black Sands 2 Adjustable Water Spray Bars Table Top and Hopper Constructed of Fiberglass Vacuum-Sealed ...

Dove 4ft x 7.5ft Concentrating Table

• Manufacturer: Dove Equipment and Machinery

Capacity: Voltage: 208-230/460 Volt | Current: 9/8.3/4.15 Amps | Deck design: Rectangular | Deck size: 1.2m x 2.4m (3.93ft x 7.87ft) | Deck material: Wooden Deck | Max feed size: 6mm | Coarse: 0.62 - 3.75 TPH | F...

CTI-X7® 33in Ceramic-Lined Heavy Media Cyclone

• Manufacturer: CTI

Size: 33in | Inlet diameter: 12.25in I.D | Overflow diameter: 1ft 4.25in I.D | Cone diameter: 2ft 9in Major, 1ft 1.8125in Minor | Connection: 3/4in Flanges | Lining: 1in, 1.5in, 2in Alumina Oxide Ceramic | End t...

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers

• Manufacturer: JET

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers, (1) Eriez vibratory feeder, valves c/w (2) Warman centrifugal pumps, mod. 75WBH, 100 hp ea. (2nd Loc. Red Zone, Level M)