Used threading in Ontario, Canada

WATERBURY FARREL #40

• Manufacturer: Waterbury Farrel
• Model: 40

Equipped With Note: Main gear missing one tooth | Maximum diameter: 5/8" | Maximum thread length: 4-1/2" | Die pocket: 6-1/4" x 1" x 4" | Motor: 5 HP | Electrics: 220volts | Output: up to 50 PPM | Weight (approx)...

GPM SERIES

Model GPM-16C Planetary Die Double End Thread Rolling Machine The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/4") either via the standard magazine feeder, or ...

GPM SERIES

Model GPM-50 Planetary Die Double End Thread Rolling Machine Performance (Cylcle time for 1200mm total lgth): The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/...

2009 SOMSAN M12 SINGLE SPINDLE ROUND NUT TAPPING MACHINE

Equipped With FEATURES: Vibratory Feeder Hydraulic Clamping for Round nut tapping

MACHINE PRODUCTS BM

• Manufacturer: MACHINE PRODUCTS

Equipped With These machines are for the manufacture of long screws & bolts, fully automatic from wire coil to finished product. A single machine, consisting of harmonized components, can perform the following op...

Screw & Bolt Making Machine BM

• Manufacturer: Walden Machinery 2

Modular Long Stroke Screw & Bolt Making Machine These machines are for the manufacture of long screws & bolts, fully automatic from wire coil to finished product. A single machine, consisting of harmonized compon...

PRUTTON 125B-HV

• Manufacturer: Prutton
• Model: 125B-HV

Equipped With * Twin Ferris Wheel Feeder Drums Max. diameter: 1/4" | Max. thread length: 3" | Underhead blank length: 3" | Speed: 600-800 ppm (up to 1800ppm w/air jet feed) | Hopper capacity: 120 lbs

1975 National 6L4

• Manufacturer: National
• Model: 6L4

Maximum cutoff diameter: .375 inches | Number of dies: 4 | Maximum cutoff length: 4.5 inches | Maximum kickout length: 3.125 inches | Minimum kickout length: .750 inches | Minimum cutoff length: .875 inches | Ma...

2021 GOVAMA HK25

• Manufacturer: GOVAMA

Equipped With Min. Threading Diameter (In-feed): 3 0.118) Max. Threading Diameter (In-feed): 48mm (1.889”) Maximum Thread Length (In-feed): 170mm (6.692") * Heavy duty 3”dia spindles * 7” Rexroth PLC control scre...

REED A23

• Manufacturer: Reed
• Model: A23

Equipped With Min. - Max. Threading Diameter (In-feed): 1/4" - 3-3/4" Min. - Max. Thread Diameter (Thru-feed): 1/4" - 1" Maximum Thread Length (In-feed): 2-3/8" Maximum Thread Length (Thru-feed): 11"

VIDEX

• Manufacturer: Videx

Equipped With * Fully Automatic Specialty Bolt Machines >> Single / Double End? U-Bolts, Eye Bolts, Anchor Bolts, Threaded Studs, Chamfered Parts and more * High Speed Planetary Thread Rollers * High Speed Nail R...

2002 KINEFAC MC-4

• Manufacturer: KINEFAC

Equipped With Max. Threading Diameter (In-feed): 1-1/2" Max. Thread Diameter (Thru-feed): 3/4" Min. Diameter Infeed or Thrufeed: 1/32"

2013 GOVAMA 3R-9

• Manufacturer: GOVAMA

Equipped With **Safety Features *All pinch points guarded with covers *All covers have coded magnet safety interlock switches *2 handed control for jog or automation process *System must be reset after e-stop act...

2013 TESKER 230

• Manufacturer: TESKER

Equipped With Max. Threading Diameter Up To 2-1/2" * Spindle Speeds VARIABLE * Complete with Hydraulic Pump and Tank

National 10L4

• Manufacturer: National
• Model: 10L4

Equipped With * IFO Transfer Location: Number of dies: 4 | Number of stations: 5 | Maximum wire diameter: 5/8" | Maximum length underhead: 4-3/8" | Min. length underhead: 1-1/8" | Max. cutoff length: 5-3/4" | Min...