Building Filters
2,150 Liter Mixing kettle
-On four stationary legs that are 26” tall -Cone bottom with dimples -Jacketed -lid on top, half opens -SPX Lignin mixer clamp on on top -SS -Shipping dimensions: 115” tall x 68” diameter -Tank dimensions: 48” ta...
APM DS-SS-16-PP/PE Drop Sealer
- Manufacturer: APM
- Model: DS-SS-16
Drop sealer model DS-SS-16-PP/PE yields a smokeless and odorless bead trim seal on bags up to 15.5" wide and products up to 22" long. Polypropylene bags up to 2.5 mil and Polyethylene bags up to 1.75 mil thick ca...
Skokie, IL
41,783 Litres Stainless-steel Tank with Heating Coil
-Flat bottom and top -Heating coil on inside -Mixer with motor -Man hole on side is -Stainless steel with insulation on the out side -Bottoms valve is 4" -160" tall x 142" diameter -9191 imp gal -Level gage -Manh...
- Trusted Seller
Lower screw spare part for de airing-pugmill VICENTINI mod. IMP-250M
- Manufacturer: Vicentini
This lower screw spare part, specifically designed for the stainless steel VICENTINI mod. IMP-250M de-airing pugmill, is an essential replacement component to ensure the continued performance and efficiency of yo...
Isola Vicentina, Italy 
31 Litres little jacketed tank
-Shipping dimensions: Height 42" x Width 22" x Length 25" -Stainless steel -Open top -On for legs with wheels -Cone bottom with drain port -12” top opening -Tank dimensions: 13” x 14.5” -Drain port sits 3.5” down...
$336 USDBrant, Canada
APM DS-SS-16 Drop Sealer
- Manufacturer: APM
- Model: DS-SS-16
APM's full line of gravity drop sealers can be used alone or in conjunction with a speedy bag packager. APM drop sealers produce either an impulse seal, impulse seal & trim or a bead trim seal. They can seal pack...
Skokie, IL
400 Liters stainless steel tank
- Manufacturer: Stapco
-Model: OVC-30-100 PS-304SS-U -SN: S-1164-3 -Welded to square base, steel cart with handle, wheels, and built in Forklift pockets -Drain at the bottom is 1.5” diameter -Tank dimensions: Height: 35” x Diameter: 30...
$716 USDBrant, Canada- Trusted Seller
De-airing pugmill VICENTINI mod. IMP250M
- Manufacturer: Vicentini
Indicative production kg/h: 1700 | Machine body material: cast iron | N° of screws: 02 | Screws material: iron | Diameter of screws mm: 250 | Type of extrusion mouth: n°01 cylindrical barrel with round exit + n°...
Caldogno, Italy - Trusted Seller
IMP.G.3 -INKMAKER -AUTOMATIC INK PREPARATION SYSTEM
CT553303 IMP.G.3 -INKMAKER -AUTOMATIC INK PREPARATION PLANT PLANT USED
Milan, Italy 
2,410 Litres stainless steel tank
-On 4 stationary legs that are adjustable, rughly 42” tall -Cone bottom with dimples -Port on very bottom is 3”, two other drains on the bottom both 2” -Tri clamp ports at the bottom side are 2” -Cone top -Man ho...
$2,631 USDBrant, Canada
ELLIOTT 110M5 44076
- Manufacturer: Elliott
INLET 14.7 PSIA @ 100 DEG F; DISCHARGE 51.5 PSIA; RANGE: 65000 CFM @ 60 PSIA; 120000 CFM @ 40 PSIA; CAST IRON CASE; WELDED IMPELLERS, IMP DIA=67.5"; CCW FACING INLET; FACING THE COUPLING END, ROTATION IS CW;
Cleveland, TX- Trusted Seller
2008 Sterling Presvac 3000 gal
- Manufacturer: Sterling
2008 Sterling LT 9500 Tandem hydro vac truck Presvac Systems 3000 imp gal tank c 13 Cat 13 spd trans 60,000 lb GVW. Fruitland 1200 rsh pump. new external hydraulic controls, everything works . 685 gal per minute,...
VESSELS/REACTORS 61168
ROBERT JENKINS MFG; WELD DISH TOP & BTM; CS LIMPET COIL JKT;42 TURNS STR SIDE;LIGHTNIN MIXER; 14:1 RATIO;DIRECT COUPLED TO 200 KW; 3/50/416 VOLT; 991 RPM NON-FLAMEPROOF MTR; MECH SEAL; BTM ENTERING AGIT; UNIT HA...
Cleveland, TX
VESSELS/REACTORS 60643
ROBERT JENKINS MFG; WELD DISH TOP & BTM; CS LIMPET COIL JKT;42 TURNS/STR SIDE; LIGHTNIN MIXER; 14:1 RATIO;DIRECT COUPLED TO 200 KW; 3/50/415 VOLT; 991 RPM NON-FLAMEPROOF MTR; MECH SEAL; BTM ENTERING AGIT; UNIT H...
Cleveland, TX
TANK, HEATED, MIX, 590 GAL, SAN.316SS, ATM#INT, 65#JKT, 5' X 4'4'', 5HP,DUAL MOTION KETTLE, REFURBISHED
- Manufacturer: GPE
TANK, HEATED, MIX, 590 GAL, SAN.316SS, ATM#INT, 65#JKT, 5' X 4'4'', 5HP, DUAL MOTION KETTLE, REFURBISHED
Alvin, TX