Used casting machine

Vibrating conveyor BMD, 2600 mm x 860 mm x 200 mm

2 motors FEIGE, type V17110/4, 1,6 kW, 1440 rpm, 380 V Vibrating motors below the grid With 3 silent blocks on each foot The bottom of the conveyor is equipped with rubber Possibly suitable for tumble blast machine

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

Pendulum cutter, Ø 508 mm

• Manufacturer: DÜRRSCHMIDT

With electric switch With possible rotation of the machine around 90° Disc Ø 508 mm Bore Ø 76.2 mm Thickness 5.5 mm Cranked disc

1979 DISAMATIC 2013 MK5, cycle time 9s, with AMC

• Manufacturer: DISAMATIC

DISAMATIC 2013 MK 5 (upgraded from MK 3 to MK 5 in 2009) Control board SIEMENS S7 Touch Panel Conveyor belt under the machine (cellar) With AMC 18, hydraulic

Dosing srew, Ø 50 mm, with hopper

Year of construction: 1990, weight: 140 kg Motor BAUER, type 022-10/DK94241K, 1,1 kW, 99 rpm (exit), 220/380 V, brake motor With inductive rotation measuring sensor With agitator for the product flow The scew ove...

Degassing unit FOSECO

• Manufacturer: Foseco

Dimensions: Length: 1350mm; Width: 1160mm; Height: 2050mm 400V; 50Hz; 1,6kW; 540rpm With CE label on the machine For crane suspension

Mobil articulated arm screw mixer AXMANN, 10 t

• Manufacturer: Axmann

Dimensions: length 7200 mm, width 1900/1500 mm, height 3600 mm With rail trolley With sand hopper With pneumatic brake With 2 pneumatic slides for sand inlet

Automated core shooter RÖPER H5

• Manufacturer: Laempe / Röperwerk

Largest core box dimensions: width 460 mm, depth ± 500 mm, height 400 mm with vacuum pump and gas flushing plate With complete housing, core discharge plate, suction pipes, with hydraulic side clamping and hydra...

1998 Core shooter LAEMPE LB20

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

2014 Core shooter LAEMPE LL10

• Manufacturer: Laempe / Röperwerk

Core shooter: Shooting volume: 15 litres (was expanded later for larger shot volumes) Dimensions of the machine: Length: 2100mm; Width: 2050mm; Height: 2080mm For horizontally and vertically separated core boxes ...

Furansand mixer BORDEN ± 3 t/h

Motor LEROY SOMER, type: LS 132M1, serial number: 320823 4 kW, 965 rpm, 220/380 V This machine is without stand, turnable, pumps and control unit It has a sandhopper with 4 wheels to file coreshooter It is possib...

2000 Core shooter LAEMPE LB25 and mixer LAEMPE SM7

• Manufacturer: Laempe / Röperwerk

Corebox measurements and weights Maximum gassing area with gassing manifold (alu): 580mm x 700mm Optional: gassing area with gassing hood and integrated cope eject plate: 550mm x 630mm Optional: shoot head, shoot...

Hopper with dischargingbelt

Bunker with extraction belt for moulding machine ULLRICH + ROSER Content ± 4,3 m³, belt, 650 mm x 600 mm Driven by moto- gearbox and chain Output ± 0,6 m³/min Shaft 1600 x 2000 mm, h. 1950 mm

1998 Gassing unit coldbox LÜBER LW-FDA-825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Gas pressure is regulated by proportional valve Gas dosing is made by high speed counting All parameters are introduced in the machine panel -gassing pressure -main gassing pressure -pressure ramp -gassing time -...

2004 Articulated arm screw mixer EUROTEK, 20 t/h

• Manufacturer: Eurotek

External dimensions: length 6000 mm, width 1250 mm, height 3630 mm With turbo mixing screw 15 kW First arm transport belt with motorized rotation and pneumatic brake Regulated sand inflow by 4 pneumatic slides co...