Used grinders

Tria TR 120-49 High-Capacity Granulator | 1,200 kg/hr | 490mm Rotor | 50 HP | Sound-Insulated | Water-Cooled Chamber

• Manufacturer: Tria

54129003 Used Tria TR 120-49 High-Capacity Granulator | 1,200 kg/hr | 490mm Rotor | 50 HP | Sound-Insulated | Water-Cooled Chamber. 1200mm rotor width. Approx. 970mm W 120mm H feed opening, rear trap-door feed s...

Cumberland Granulator,

• Manufacturer: Cumberland
• Model: 584

53482001 Used Cumberland Granulator, Model 584. 14" x 20" Feed throat. (3) knife open rotor, (2) Bed knives. Driven by a 20hp, 3/60/230/460 volt, 1755 rpm motor. Set up for bottom blower discharge. hopper with cu...

Irwin Chesaw Granulator – Model CH-LH 28.7-04, 15 HP with Auger Discharge

• Manufacturer: Irwin

10755132 Used Irwin Chesaw Granulator; Model CH-LH 28.7-04. 5" x 33" Rotor Cutter, 15 hp, 208-230/460 volt, 1760 rpm, Fan Cooled 10:1 gearbox. Lincoln Auto-Lube System. Evacuated by a 4" Auger Discharge System. A...

Cumberland 2428I Granulator – 24" x 28" Twin Shear Rotor, 40 HP

• Manufacturer: Cumberland
• Model: 2428I

10755129 Used Cumberland, Model 2428I Granulator. 24" x 28" feed throat. 3 knife twin shear open rotor. 2 bed knife. 40 hp 230/460 volt motor. Tray feed hopper. 8" right hand airveyor discharge.

Cumberland Granulator, Model 18 x 37

• Manufacturer: Cumberland
• Model: 37B

44496008 Used Cumberland, Model 18X37, Granulator. 18" X 37" Feed Throat. 5-Knife Steep Angle Step Adjustable Rotor Knives (10 Segments). 2- Bed Knives. Designed for Film Granulation. Belt Driven by a 100 HP, 460...

Cumberland 14-85 Pelletizer – 14” Pelletizer with 24-Knife Rotor & 30 HP Motor

• Manufacturer: Cumberland

51068005 Used Cumberland 14-85 Pelletizer 14" Pelletizer with 24-Knife Rotor & 30 HP TECO/Westinghouse AC motor, bolt on blades, ABB VS AC drive in panel mounted to base, new belts, new rotor and feed roll bea...

TRIA GRANULATOR XT 100-80

• Manufacturer: Tria

42275063 Used TRIA GRANULATOR XT 100-80 Granulating chamber 40.94" x 31.50" (mm.1.040*800) 75kw drive New rotor, diam 620 mm (24,41") 1.000 mm.wide (40'') N.5 Rotor knifes N.2 Fixed knifes Electrical hopper openi...

Tria Model 900 NS-R Pull Roll Granulator – High-Performance Industrial Granulator

• Manufacturer: Tria
• Model: 900 NS-R

10755147 Used Tria Model 900 NS-R Pull Roll Granulator. 12.5" x 40" feed throat (1020mm x 320mm). Five (5) knife open rotor with two (2) bed knives. Rotor is belt driven by a 22 Kw (30 HP). Feed hopper with rear ...

30HP Plastic Granulator – Andritz Sprout-Bauer DSF1518, 7-Knife Rotor

• Manufacturer: Andritz

44496018 Used Andritz / Sprout-Bauer 30HP Model DSF1518 Granulator. 7-knife rotor, 2 bed knife. Driven by 30 HP 460 volt only motor, belt drive. 5" X 18" blow-in in-feed hopper, vacuum take-off discharge. Mounted...

Industrial Plastic Granulator – Andritz Sprout-Bauer DSF1518, 30HP, Film Recycling

• Manufacturer: Andritz

44496016 Used Andritz Sprout-Bauer Model DSF1518 Granulator. 7-knife rotor, 2 bed knife. Driven by 30 HP 460 volt only motor, belt drive. 5" X 18" blow-in in-feed hopper, vacuum take-off discharge. Mounted on a s...

Andritz Sprout-Bauer DSF1518 Granulator – 30HP, Film Granulation, 7 Knife Rotor

• Manufacturer: Andritz

44496015 Used Andritz Sprout-Bauer Granulator, Model DSF1518. 7 knife rotor, 2 bed knife. Driven by 30HP, 3/60/460 Volt only motor. Belt driven 5? x 18? blow-in in-feed hopper, vacuum take off discharge. Mounted...

Key Knife Honer

Key Knife Honer - "Pro-Honer" to hone disposable Key Knives for additional use. Comes with cabinet and spare knives.

Cable Management Wire Chopper / Granulator System | 2018 | 25 HP Granulator + C1 Air Separator + Dust Collector

• Manufacturer: Cable Management

52791015 Used Cable Management Wire Chopper / Granulator System | 2018 | 25 HP Granulator + C1 Air Separator + Dust Collector, low hours (500) Spare parts still available. (1 year warranty available). 1120CM 25hp...

Nelmor RG2257 Granulator – 22" x 57" Feed, 150 HP, Clam Shell Chamber, Airveyor Discharge, OEM Controls

• Manufacturer: Nelmor

10755168 Used Nelmor Model RG2257 Granulator. 22" x 57" feed throat. 5 knife (15 pcs) open rotor with 2 bed knife positions (6 pcs). Top in-feed. 150 HP 460-volt 1785 RPM Bador Super-E motor. 10" OD Airveyor disc...

ZERMA GSH 500/1000 Granulator – 75 kW, Open Rotor, Plastic Recycling, 400–600 kg/hr

• Manufacturer: Zerma
• Model: GSH 500/1000

53795002 Used ZERMA Model GSH 500/1000 Granulator. 19.5" dia. x 39" st. side (500 mm dia x 1000 mm St. Side). open rotor. Rotor is belt driven by a 75 Kw (112.5 HP). Approximate production rate of 400-600 kg/hr. ...