Used roller in Wallonia, Belgium

Small vibrating dose conveyor ± 2300 mm x 200 mm

• Manufacturer: Simex

Motor SINEX, serial number 28463A3, 220/380 V Magnet vibrator

Small bunker with 2 compartments 2 x 2,7 m³

1st screw CEM type MEUB90S4, 1,1 Kw, 220/380 V, 1410 rpm 2nd motor for screw CEM type MEUB90L8, 0,55 Kw, 220/380 V Driven by belt with one screw for each compartment Ø input 30mm (2x) Ø output 1x 200mm

Small vibrating dosing channel, ± 2300 mm x 200 mm

• Manufacturer: Simex

Magnet vibrator with liner Weight: ± 300 kg | Outside dimensions: 2600 mm x 630 mm x 650 mm | Useful dimensions: ± 2300 mm x 200 mm x 60 mm | Motor sinex, serial number: 28463A3, 220/380  V

2008 Automatic sand laboratory sand compactability tester SIMPSON Hartley 2552

• Manufacturer: Simpson

Dimensions appliance: 1200 x 800 x height: ±600mm Cabinet dimensions: Length: 1200mm; Width: 400mm; Height: 2000mm Suitable for batch mixers Compactability measurements

Small wood saw, in gradual angle 2 x 45°

• Manufacturer: Omga

With vice, table, disc Ø 240 mm Weight: ± 40 kg | Outside dimensions: 700 mm x 550 mm, h. 450mm | Inside dimensions: 580 mm x 160 mm | Motor omga, serial number: 37687, 1,3 hp, 220/380 V

Fastloop system not motorized

Consists of : 2 x Roller track length: 6000mm; width: 1060mm; height: 410mm (57 rolls) 1x Roller track length: 4000mm; width: 1060mm; height: 410mm (39 rolls) rollers Ø 90mm, length: 990mm (Installation length: 1...

Steep conveyor 30 000 mm, useful width 1150mm

External dimensions: length 32 850 mm, width 1360 mm, height 580 mm Motor: 0,75 kW, 220/380 V, type gear motor, 1,8 rpm at the outlet Feet adjustable in height Roller covered with rubber Transmission from the mot...

Vibration table 2000 x 1250 mm

External dimensions: Length: 2000mm; Width: 1250mm; Height: 500mm With 8 castors: Ø850mm; Length: 1190mm

Screw dosing with sand hopper GERICKE

• Manufacturer: Gericke

Motor 1st screw: 0,11 kW, 220/380 V, type SG1-34/D056-10, serial number K8197603, 110 W Motor 2nd screw: 0.16 kW, 180 V, type SG1-34/NUP530-203, 160 W, 3000/445 rpm output With small cone Screw body mad of stainl...

Extraction belt conveyor without feet 3900 x 600mm

Motor LEROY SOMER V112 M1, serial number 70664, 4 kW, 1440 rpm, 220/380 V With scraper on the belt, between axle of the rolls 3900 mm Ø 400 mm drive roll Ø 90 mm small rolls Motor drive to the gearbox by 3 belts ...

Moulding machine OSBORN 716 R4F, table 850mm x 530mm

Weight: 1900 kg | Dimensions: width 1000mm, depth 1300mm, height 1800mm | Pression stroke: 165mm | Pression capacity: 11 500 kg | Pattern draw: 254mm | Jolt capacity: 625kg | Maximum depth of moulding boxes: 686...

Moulding machine OSBORN 716 R4F, table 850mm x 530mm

Ram-jolt machine Weight: 1900 kg | Dimensions: width 1000mm, depth 1300mm, height 1800mm | Pression stroke: 165mm | Pression capacity: 11 500 kg | Pattern draw: 254mm | Jolt capacity: 625kg | Maximum depth of mou...

Rubberbeltconveyor, 6900 x 800 mm (1,1 m/s)

• Manufacturer: Gourdon

Gear motor SEW, plaque not available; 2,2 kW Driving roller with rubber, roller width 950 mm, Ø 500 mm U-shaped structure, with a device of filling, roller tensioner width 900 mm, Ø 400 mm With automatic greasing...

Moulding plant HWS-HSP1 550mm x 670mm x 150/200mm

• Manufacturer: HWS

SEIATSU airflow-pression moulding process Roller lift Tilting roller conveyor for inserting cores Boxes are clamped manually SIEMENS S7 control system and control panel Manual transfer and turning to the casting ...

Fastloop with vibrating table

Fastloop consisting of: Vibration table: Dimensions: Length: 1000mm; Width: 1000mm; Height: 650mm roller width: 675mm; center distance: 225mm; Ø roller: 90mm With relay control 4 air bars End switch under the tab...