Used separators in Wallonia, Belgium

Cyclone with filterwall LDP 1500-2000m³/h

1,5 kW, 220/380 V, 2810 rpm, 50 Hz, direct drive Cyclone separates heavy dust 4 filter panels 450 x 450mm With hand cleaning and 4 dustbuckets

Greensand mixer capacity 5-6 t /h, SPEEDMULLOR 30A

Motor NORMACEM 13,2 kW, 220/380 V, 960 rpm Direct drive without gearbox, 2 horizontal grinding wheels With switch cabinet, pneumatic cover for sand filling, idem separated for the additives

Vibrating polishing machine, brand RÖSSLER 2.2x0.6 m.

Type: R1000LT, serial number: 145/77 In good condition 2 vibrating motors, 220 / 380V With stainless steel basin, agitator, pre-separator With sludge pump (compressed air) Tank with polyurethane filter

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 800 mm, width 620 mm, height 780 mm Engine OBERMOSER: 380 V; 0,5 CV, type: reducer drum speed ± 170 rpm/min in solid housing drive over chaine 2 outlets for separating

Nobake moulding plant IMF

± 150 m rolling conveyor 4 x transfer wagons Mixer IMF, 30 t/h, equipped for furan process ROLLOVER with mould/pattern separation Mould manipulator IMF for overhead crane Painting station Pattern Fastloop

2009 Amine Gas Washer BGT, 9000 m³/h

• Manufacturer: BGT

Dimensions scrubber: Ø 1200mm; height: 7580mm (total: 10580mm) + chimney: Ø500mm height: 3000mm With solids separator With fan With control unit With collecting basin: Ø1600mm; height: 750mm

Electric treatment furnace NABERTHERM, 900 mm x 1200 mm x 1400 mm

• Manufacturer: Nabertherm

Type: N1500/14, Serial number : 179918 Year of construction: 2005 Weight: +/- 3500 kg Heating power 110 kW With separate control board with SIEMENS STEP 7 With driven exhaust flap Bottom plats made of silicon c...

Shake-out grid 2400 mm x 2300 mm

External dimensions: 2700 mm x 2300 mm, h. 2570 mm (on foot) Motor ELEKTRIM, 18,5 kW, 380/415 V, 977 rpm With conus on the exit, with one vibrating axle motor on a separate base The grate is on 4 rubber blocs

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 900 mm, width 570 mm, height 1180 mm Engine BAUER: 380 V; 0,5 CV; type: reducer drum speed 175 rpm/min in solid housing drive over 2 V-belts 2 outlets for separating

2009 Tumble belt shotblasting machine RÖSLER RMBC 2.1

• Manufacturer: Rösler

Dimensions: Length: 7306mm; Width: 4385mm; Height: 6400mm Internal dimensions: Ø800mm; width: 900mm With double magnetic separation 25kW; 400V; 50Hz With hydraulic charging skip With discharge conveyor With pneum...

Ladle heating station PROMEOS

• Manufacturer: Prometeos

Serial number: 00131010360µYear of construction: 2013 Dimensions: Length: 2000mm, Width: 2200mm; Height: 2600mm Made for siphon pans Burner insert 600mm For natural gas H; 10 ±0,05Wh/m³ Each machine has an operat...

2014 Core shooter LAEMPE LL10

• Manufacturer: Laempe / Röperwerk

Core shooter: Shooting volume: 15 litres (was expanded later for larger shot volumes) Dimensions of the machine: Length: 2100mm; Width: 2050mm; Height: 2080mm For horizontally and vertically separated core boxes ...

Reclaiming plant for furan sand OMEGA

• Manufacturer: Omega

400V; 50Hz; 250A Consisting of: - sand breaker - 2 sand conveyors - 1 small hopper - 1 bucket elevator - vibrating conveyor pipe - magnetic separator - 2 × attrition unit - Fluid bed deduster - 1 large silo - Con...

hanger type shot blast plant SISSON-LEHMANN, 4 turbines 18,5 kW

Long and solid air suspended railway with 11 hooks 2 t In basement double vibrating screen conveyor,with magnetic grit cleaning Dust filter BMD 24000 m³/h, with isolated exhaust, silencer and 2 pre-separator cycl...

Tumble belt shot blast machine GF ST9

• Manufacturer: G&F

Dimensions: length: 2960mm, width: ±1900mm, height: 4900mm Internal dimensions: Ø930mm; width: 1000mm Max unit weight: 120kg; max unit dimensions: 400mm With pneumatic separator With hydraulic skip With discharge...