Processing » Utrecht

Building Filters

39

Used bag in Utrecht, Netherlands

  • Trusted Seller
    1987 Will S 3.60E

    1987 Will S 3.60E

    • Manufacturer: Will

    Incomplete vertical transwrap form fill seal machine. For 5 and 10ltr plastic bags, from a roll by heatsealing. Foil width approx 75 cm. no. 8704, year: 1987. Pneumatic driven, For thin liquid products like milk...

    Lopik, Netherlands
  • Trusted Seller
    1988 Will S3.50

    1988 Will S3.50

    • Manufacturer: Will

    Vertical transwrap form fill seal machine. Sholder size 330 x 65 mm, length adjustable. For 5 and 10 ltr plastic bags, from a roll by heatsealing. Pneumatic driven, For thin liquid products like milk or water. Ti...

    Lopik, Netherlands
  • Trusted Seller
    1996 Cryovac ONP - 2002A

    1996 Cryovac ONP - 2002A

    • Manufacturer: Cryovac

    Vertical Form, fill, seal, machine for big pouches/bags for hot fill. Including hopper, elevator, fittment sorting and sealing unit. Control panels, framework, spare parts and instruction manuals.

    Lopik, Netherlands
  • Trusted Seller
    Cryovac Onpac 2000

    Cryovac Onpac 2000

    • Manufacturer: Cryovac

    Vertical Form, fill, seal, machine, for big pouches/bags for hot fill, model number RC2000B, DIAG number PEHOE026, serial number 0067, 3 phase, 230 volts, 60 Hz, air 30 CFM, 90 PSI, 5000 Amps, all stainless steel...

    Lopik, Netherlands
  • Trusted Seller
    1999 Thimonnier TD1500

    1999 Thimonnier TD1500

    • Manufacturer: Thimonnier

    Set of 2 Piston dosers with double jacketed hoppers. Capacity dosers: approximately 100-250ml. 2 x Double jacketed hoppers, each with 1x spray bowl (CIP cleanable). Capacity hopper ca. 95 liter. Spare parts manua...

    Lopik, Netherlands
  • Trusted Seller
    2001 Cryovac CJ55 MD +

    2001 Cryovac CJ55 MD + BDF

    • Manufacturer: Cryovac

    Horizontal Flow Wrapping machine. Capacity: approx. 40 to 70 packs per minute (depends on product). Product dimensions: min. 50-150mm between the portions and 20-250 mm length of portions. 5 kW - 50 Hz - 400 V - ...

    Lopik, Netherlands
  • Trusted Seller
    2005 IDC-Construct Powder dissolving tank

    2005 IDC-Construct Powder dissolving tank

    • Manufacturer: IDC-Construct

    Extreme powerfull Mix and powder dissolving tank. Tank Single jacketed . Top side driven dissolving agitator. Motor power: 45 kW - 81 A - n1: 980 rpm. Working pressure in tank: atmospheric 0. Lamp on top of tank....

    Lopik, Netherlands
  • 1960 W&H Triumph 3

    1960 W&H Triumph 3

    • Manufacturer: W&H
    • Model: TRIUMPH 3

    DESCRIPTION The W&H Triumph 3 is a robust and reliable paper bag making machine, known for its solid construction and long-lasting performance. This model is designed for the efficient production of block bottom ...

    Den Dolder, Netherlands
  • 1974 Stiegler TS800

    1974 Stiegler TS800

    • Manufacturer: Stiegler
    • Model: TS800

    DESCRIPTION This bagmaking machine was originally build by Stiegler in 1974 but in 2017/2018 it was completely overhauled and rebuild to servo by German company RHS.

    Den Dolder, Netherlands
  • 2022 Somtaş TC 1846

    2022 Somtaş TC 1846

    • Manufacturer: Somtaş

    DESCRIPTION The Somtas TC-18-46 is a highly efficient, full-servo-driven machine designed for the production of flat-handle and SOS (Self-Opening Square) paper bags. Known for its reliability and high-speed outpu...

    Den Dolder, Netherlands
  • 2007 BA.S.FF. SH99 F.2000

    2007 BA.S.FF. SH99 F.2000

    • Manufacturer: BA.S.FF.

    DESCRIPTION BA.S.FF. srl has acquired a specific top-level knowledge in the production of welding machines for plastic material processing . BA.S.FF avails itself of top techincal resources and know-how technique...

    Den Dolder, Netherlands
  • 2006 Dahbah ABM-53SPZ

    2006 Dahbah ABM-53SPZ

    • Manufacturer: Dahbah

    DESCRIPTION This plastic bag making machine produced by Taiwanese producer Dahbah is in very good condition and can be inspected in production. It produces stand up pouches or 3 side seal pouches with zippers. Wi...

    Den Dolder, Netherlands
  • 2013 Hemmingstone HM-1250 UD-SHD+W

    2013 Hemmingstone HM-1250 UD-SHD+W

    • Manufacturer: Hemmingstone

    DESCRIPTION Hemmingstone is a Taiwanese company founded in 1979. It produces bagmaking machines on a high modulair basis. This particular machine is build to make diaper bags with cross handle and paramount bag.

    Den Dolder, Netherlands
  • 1994 Stiegler ST 700

    1994 Stiegler ST 700

    • Manufacturer: Stiegler

    DESCRIPTION This Stiegler ST 700 is a plastic bagmaking machine designed to produce standard wicket bags. It was build orginally in 1997 but in 2007 et was renovated and equipped with servo drives so it is a mode...

    Den Dolder, Netherlands
  • 1992 Elwa EL-B-GR-1300

    1992 Elwa EL-B-GR-1300

    • Manufacturer: Elwa

    DESCRIPTION THis Elwa bottomseal bagmaking machine is equipped with a punchin unit. The maximum sealing width is 1300mm and it can run up to 220 bags a minute. Produced in 1992 and maximum bag length is 1500mm.

    Den Dolder, Netherlands
123

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.