Building Filters
- Trusted Seller
2008 Lattice Girder Processing 2 Lifts PREQAST-M25573
Lattice Girder Processing 2 Lifts Year of manufacture 2008 Lift and storage system Hydraulic shear with measuring table Length 8m and lattice girder buffer Storage system with 14 compartments with opposite vertic...
Thalheim bei Wels, Austria - Trusted Seller
Lattice Girder Processing Saw PREQAST-M25572
Lattice Girder Processing with Saw Cut-off saw for cutting lattice girders to length. Various saw blades Lattice girder rack for 9 bundles of lattice girders Lattice girder rack for 4 girder heights Hydraulically...
Thalheim bei Wels, Austria - Trusted Seller
Roller Conveyor for Rebar PREQAST-M24534 and
Roller Conveyor for Rebar Complete with all electric drives. 3 frequency inverters, one for each track 1 frequency inverter for the transverse mode in the control box Length 15m, width 2.50 m Complete with all el...
Thalheim bei Wels, Austria - Trusted Seller
Extruders NORDIMPIANTI, Concrete Hollowcore Planks, PREQAST-M24527
Extruders NORDIMPIANTI With moulding cassettes for thicknesses 150 mm – 500mm. Including all accessories and spare parts.
Thalheim bei Wels, Austria 
Roller splitting machineRS 12-19
- Manufacturer: Roither Maschinenbau
Effortless slitting The RS 12 and RS 19 hydraulic roll slitting machines guarantee effortless slitting of waste and scrap rolls of paper, cardboard, plastic film and aluminum foil up to a maximum width of 1000 mm...
Seewalchen am Attersee, Austria
Automatic can pressDS-A 680
Fully automatic continuous operation Automatic can press with sturdy, replaceable wear plates made of HARDOX. The optimally designed press plate guide in combination with two knives enable smooth continuous opera...
Seewalchen am Attersee, Austria
Automatic packing pressDS-A 2200
Enormous forces for punching waste This compact, newly developed system utilizes the power of 4 separate cylinders in each pressing cycle and therefore compacts exceptionally well, even with pre-shredded punching...
Seewalchen am Attersee, Austria
Automatic can pressDS-A 250
Continuous, economical solution The continuous, fully automatic can press offers a cost-effective solution for aluminum tubes and cans. An optional integrated tilting device provides additional optimization of ha...
Seewalchen am Attersee, Austria
Automatic packing pressDS-A 700
Triple compaction in one baling cycle Thanks to the technically sophisticated baling system, these baling presses with four cylinders compact from three sides in one baling cycle. This sensational innovation ensu...
Seewalchen am Attersee, Austria- Trusted Seller
2021 Milman Plasmon 800C
- Manufacturer: Milman
Cold wall plasma system this system has only been put into operation and has not been in use since then. It is used to activate surfaces or can also be used for nitriding processes. The equipment is as good as...
Wels, Austria 
Plate tube magnet drm. 200 mm
- Manufacturer: handl maschinen
Wels, Austria
1983 BATTENFELD BSKM 170/46-S-DS Injection blow molding machine
- Manufacturer: Battenfeld
another auger is in stock + spare parts Control: conventional | Screw diameter: 35 mm | Platen: 480 x 480 mm | Displacement: 86.6 cm³ | Injection weight in polysterol: 78,8 g/PS | Closing force: 460 kN | Engine p...
Niederkappel, Austria2013 Marchner SFW 10500
- Manufacturer: Marchner
On-board computer: Yes | Compressed air brake system: Yes | Filling amount: 10500 l | Tyre equipment: 710/50-26.5 Vredestein | Admissible overall weight: 15500 kg | Distributor: baffle plate | Running gear: Tand...
iwis chains M1611 SFS accumulation conveyor chain
- Manufacturer: iwis ketten
Control: conventional | Freight basis: In stock
Niederkappel, Austria
