Processing » Trenčín Region

Search By Category

Search By Manufacturer

Building Filters

13

Used control unit in Trenčín Region, Slovakia

  • RESERVED (2007) Krauss Maffei Bolt

    RESERVED (2007) Krauss Maffei Bolt on unit SP390, screw 40 mm

    • Manufacturer: Krauss-Maffei

    Krauss Maffei Bolt on external injection unit Model: SP390BO Year: 2007 Screw: 40mm Injection volume: 204 cm3 Max temperature: 375 degrees Max Pressure: 1860 bar MC4 controll Was used for Krauss Maffei 20...

    Trenčín, Slovakia
  • (2014) Wittmann Battenfeld MacroPower E

    (2014) Wittmann Battenfeld MacroPower E 450/2100+ UNILOG B6P, SERVO

    • Manufacturer: Battenfeld

    Model: MacroPower E 450/2100+ UNILOG B6P (SERVO) Control: UNILOG B6 Technical Data Injection Unit Screw diameter = 65 mm Screw L/D ratio = 22 Specific injection pressure = 1959 bar Calculated stroke volume ...

    Trenčín, Slovakia
  • RESERVED: Krauss Maffei KM 420-2000

    RESERVED: Krauss Maffei KM 420-2000 CX (2015) Blue Power

    • Manufacturer: Krauss-Maffei

    MC6 control with color monitor Clamping unit Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold...

    Trenčín, Slovakia
  • (2017) Krauss Maffei 121-540PX (only

    (2017) Krauss Maffei 121-540PX (only 100 hours) Electric machine

    • Manufacturer: Krauss-Maffei

    MC6 controll Injection Unit - Screw diameter: 40 mm - Shot weight: 206 g/ps - Stroke volume: 226 CM³ - Injection pressure: 2377 bar - Plasticizing rate max.: 24 g/s ps - Screw speed: 297 1/min - Heating capacit...

    Trenčín, Slovakia
  • (2019) Engel DUO12060/900WP

    (2019) Engel DUO12060/900WP

    • Manufacturer: Engel

    Engel DUO12060/900WP (ECO-Drive) Year : 2019 Hours: 9900 CC300 controll Viper 40 robot Clamping force: 900 ton Opening stroke: 1800 mm Tie Bar distance: 1420x1170 mm Platen size: 1850x 1810 mm Injection ...

    Trenčín, Slovakia
  • 2015 HAITIAN MA 4700 II

    2015 HAITIAN MA 4700 II 2200

    • Manufacturer: HAITIAN

    Haitian MA 4700 II 2200, 2015 01-manufacturer: Haitian 02-type: MA 4700 II 2200 03-year of manufacture: 2015 04-condition: out of running production 05-operating hours: ca. 21.000 10-CLAMPING UNIT: - ...

    Trenčín, Slovakia
  • 2013 HAITIAN JUPITER 13000-10600

    2013 HAITIAN JUPITER 13000-10600

    • Manufacturer: HAITIAN

    Hours approx: 22.000 Machine is sold without robot, possible to buy TECHNICAL DATA CLAMP UNIT CLAMPING FORCE PLATEN SIZES D.B.T.B. MIN MOULD HEIGHT MAX MOULD HEIGHT MOULD OPENING STROKE MAX DAYLIGHT HY...

    Trenčín, Slovakia
  • (2007) ARBURG 570C 2000-800 Golden

    (2007) ARBURG 570C 2000-800 Golden edition

    • Manufacturer: Arburg

    Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] ...

    Trenčín, Slovakia
  • Engel E-MAC 310/75 ,Engel Retrofit

    Engel E-MAC 310/75 ,Engel Retrofit 2024 Thermoplast

    • Manufacturer: Engel

    Engel E-MAC 310/75 , full electric machine Controll: CC300 ROBOT/Picker Engel ER/USP 5 EP4 Serial nr.: 217614 Year of retrofit by Engel: 2024 Clamping force: 75T Size of mould platens: 560x600mm Dist. betw...

    Trenčín, Slovakia
  • RESERVED Engel DUO 2550/650 (2007),

    RESERVED Engel DUO 2550/650 (2007), Engel ERC robot

    • Manufacturer: Engel
    • Model: DUO 2550650

    Engel DUO 2550/650 year: 2007 CC200 controll Clamping/injection unit Clamping force [kN] 6500 Dimensions of the mounting plate (hxh) [mm] 1465 x 1360 Distance between columns (hxh) [mm] 1025 x 930 min./max....

    Trenčín, Slovakia
  • Krauss Maffei Krauss Maffei 180-750AX

    Krauss Maffei Krauss Maffei 180-750AX (2010 , new servo)

    • Manufacturer: Krauss-Maffei

    Krauss Maffei 180-750AX (full electric machine) Clamping force: 180 ton Injection Unit SP750AX Screw: 50 mm Controll: MC5 Machine has new servo which cost client(20.000€)

    Trenčín, Slovakia
  • Krauss Maffei 300-1000CX (year 2013

    Krauss Maffei 300-1000CX (year 2013 ) + Sepro Success 22 robot

    • Manufacturer: Krauss-Maffei
    • Model: 300-1000CX

    - Clamp Force 300 Tonne (3000KN) - Clamp Unit 995 x 1050mm - DBTB 630 x 630mm - Screw Dia 55mm - Shot Weight 476g - MC5 Control - Year 2013 Machine has only 30.000 hours , is from clean medical industry.

    Trenčín, Slovakia
  • RESERVED Krauss Maffei 3200-24500MX (year2014,

    RESERVED Krauss Maffei 3200-24500MX (year2014, 3200 ton)

    • Manufacturer: Krauss-Maffei

    Krauss Maffei KM 3200-24500 MX injection molding machine Year of manufacture - 2014 Number of working hours - 35,775 Plasticizing system SP 24500 A complete plasticizing system with a screw diameter of 175 mm...

    Trenčín, Slovakia

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.