Processing » Texas

Search By Category

Search By Manufacturer

Building Filters

794

Used separators in Texas, USA

  • SWECO RM3 103093

    SWECO RM3 103093

    • Manufacturer: Sweco

    48" WIDE X 8' LONG; 304SS CONTACT; RECTANGULAR SCREENER; MFG. BY SWECO; BELT DRIVEN BY A 5 HP; 1735 RPM; 575 VOLTS; 3 PHASE; 60 HZ; 50 AMP ELECTRIC MOTOR; OVERALL DIMENSIONS 5' WIDE X 10' LONG;

    Cleveland, TX
  • ESCHER-WYSS P-5 90312

    ESCHER-WYSS P-5 90312

    • Manufacturer: ESCHER-WYSS

    Qty: 1 | Alloy: S | Diameter(in"): 30 | Length (ft'in"): 1'5" | Material: 316SS | Driver type: HYDRAULIC | Hp: 60 | Rpm: 1775

    Cleveland, TX
  • CENTRIFUGES 92153

    CENTRIFUGES 92153

      LIQUID/LIQUID CONTACTOR; BOWL RATED 2000 RPM, SEAL RATED 250 PSI @ 250 DEG. F.; BOWL IS 39" OAL X 36" OD; UNIT HAS 316SS BOWL, 304SS TOP COVER, AND CS BOTTOM HOUSING WITH A COATING; BOWL IS BELT DRIVEN BY A 15 HP...

      Cleveland, TX
    • APV D36 92114

      APV D36 92114

      • Manufacturer: APV

      BOWL IS 38" OD X 39" LONG; HINGED 304SS COVER, CS COATED BOTTOM HOUSING; UNIT HAS A 2" FEED PIPE, 3" OUTLET ON BOTTOM HOUSING; BELT DRIVEN BY A 25 HP 3/60/230/460 VOLT MOTOR WITH VFD CONTROLLER; OVER ALL DIMENSIO...

      Cleveland, TX
    • APV D36 92112

      APV D36 92112

      • Manufacturer: APV

      BOWL IS 38" OD X 39" LONG; HINGED 304SS COVER, CS COATED BOTTOM HOUSING; UNIT HAS A 2" FEED PIPE, 3" OUTLET ON BOTTOM HOUSING; BELT DRIVEN BY A 25 HP 3/60/230/460 VOLT MOTOR WITH VFD CONTROLLER; OVER ALL DIMENSIO...

      Cleveland, TX
    • DORR OLIVER BW-630H 92456

      DORR OLIVER BW-630H 92456

      • Manufacturer: Dorr-Oliver

      BUILT IN 1994; 630 MM DIA. X 400 LENGTH (24" DIA. X 15" DEEP);

      Cleveland, TX
    • KRAUSS MAFFEI HZ125SI-300-960 88359

      KRAUSS MAFFEI HZ125SI-300-960 88359

      • Manufacturer: Krauss-Maffei

      BUILT IN 1981; BASKET SPEED: 1150 RPM; INSIDE DIA. 1250 MM; FALK GEAR; VARI SPEED; 24" BASKET DEPTH;

      Cleveland, TX
    • KRAUSS MAFFEI HZ125SI-300-960 88358

      KRAUSS MAFFEI HZ125SI-300-960 88358

      • Manufacturer: Krauss-Maffei

      BUILT IN 1981; BASKET SPEED: 1150 RPM; INSIDE DIA. 1250 MM; FALK GEAR; VARI SPEED; 24" BASKET DEPTH;

      Cleveland, TX
    • HEINKEL HF600 99995

      HEINKEL HF600 99995

      • Manufacturer: HEINKEL

      INVERTING FILTER CENTRIFUGE; 600 MM DIAMETER X 3095 MM; MAX. CENTRIFUGAL ACCELERATION 1250 RPM; COMPLETE WITH CONTROLS; BUILT IN 1988; 1605 MM WIDTH CLOSED; 52 LITERS BOWL VOLUME; .45 SQUARE METER FILTER AREA;

      Cleveland, TX
    • HEINKEL HF-1000.1 93643

      HEINKEL HF-1000.1 93643

      • Manufacturer: HEINKEL

      1000 MM; HORIZONTAL INVERTING; 100 HP VARIABLE FREQUENCY/15 HP VARIABLE FREQUENCY AQXIAL DRIVE; WITH CONTROLS; BUILT IN 1997; 460 VOLT MOTOR ; MAIN ROTATIONAL; AXIAL MOTOR: 15 HP @ 1200 RPM; 460 VOLT; PAC MOTOR: ...

      Cleveland, TX
    • HEINKEL HF-800 100540

      HEINKEL HF-800 100540

      • Manufacturer: HEINKEL

      HORIZONTAL INVERTING; SIZE 800 MM; BUILT IN 1990; NO CONTROLS; WITH CYCLONE; FILLING QUANTITY MAX 1196/149KG; INNER BOWL DIA MAX 800; CENTRIFUGAL ACCELERATION MAX 1150; 60 HP MAIN DRIVE;

      Cleveland, TX
    • WESTFALIA MSA100-01-076 101029

      WESTFALIA MSA100-01-076 101029

      • Manufacturer: GEA
      • Model: MSA100-01-076

      CENTRIFUGE-A; WESTFALIA MODEL MSA100-01-076; POLISHED 316SSSEPARATOR SELF CLENAING DISC BOWL CENTRIFUGE; REBUILT BY CENTRICO IN 1995; MODEL MSA 100 01-076; RATED 1.0 KG/CM2 HEAVY PHASE; 4500 RPM; 35 KW 1750 RPM D...

      Cleveland, TX
    • BIRD 18 X 28 99996

      BIRD 18 X 28 99996

      • Manufacturer: Bird
      • Model: 18 X 28

      18" X 28" DECANTER CENTRIFUGE; SINGLE SCREW MACHINE; 92 TO 1 GEARBOX RATIO; BUILT IN 1997;

      Cleveland, TX
    • WESTERN STATES QUADRAMATIC Q520 93487

      WESTERN STATES QUADRAMATIC Q520 93487

      • Manufacturer: WESTERN STATES

      TMO CENTRIFUGE; BUILT IN 1995; 460 VOLT MOTOR; BATCH TYPE; 316SS PLOW TIP; 2640 # MAX. DESIGN PROCESS WEIGHT @ 850 G'S; BASKET SHELL ONLY IS ALLOY 2205; TOP LOAD-BOTTOM UNLOAD; WITH 9" TOP RING; 52 SQ. FT. SCREE...

      Cleveland, TX
    • CENTRIFUGES 90859

      CENTRIFUGES 90859

        316 STAINLESS STEEL (PRODUCT CONTACT AREAS); 18" DEEP X 40" DIA. BASKET; MOTOR (U-L CODED); SEVERE DUTY INDUCTION MOTOR, TEFC, 3 PHASE, 60 HERTZ, TYPE RGZZSD, 15 HP, 230/460 VOLTS, 42/21 AMPS, 1750 RPM, 254T FRA...

        Cleveland, TX
      • no-image_en.png

        Alfa-Laval LYNX-20 Centrifugal Separator

        • Manufacturer: Alfa-Laval
        • Model: LYNX-20

        Good condition Alfa-Laval LYNX-20 Centrifugal Separators available between 2009 and 2012 years. Located in USA and other countries. Click request price for more information.

        USA
      910111213

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.