Processing » Texas

Building Filters

139

Used sheets in Texas, USA

  • HEAT EXCHANGER

    HEAT EXCHANGER

    • Manufacturer: OHMSTEDE

    ONE (1) SURPLUS; USED; HEAT EXCHANGER; MFG. BY OHMSTEDE; YEAR: 1988; NO NB CODE STAMP; SS/316 TUBES; 100 PSI @ 125F; SHELL; 50 PSI @ 400/125F; SN: 28141. ASME CODE STAMPED.

    Houston, TX
  • GAS/GAS HEAT EXCHANGER

    GAS/GAS HEAT EXCHANGER

      Area (sq ft): 887 | Shell pressure (psi): 1440 | Tube pressure (psi): 1440 | Shell temperature (deg f): 125 | Tube temperature (deg f): 125 | Shell passes: 1 | Tube passes: 1 | No of tubes: 113 | Od (in): 3/4 | ...

      Houston, TX
    • GAS/GAS HEAT EXCHANGER

      GAS/GAS HEAT EXCHANGER

        Area (sq ft): 887 | Shell pressure (psi): 1440 | Tube pressure (psi): 1440 | Shell temperature (deg f): 125 | Tube temperature (deg f): 125 | Shell passes: 1 | Tube passes: 1 | No of tubes: 113 | Od (in): 3/4 | ...

        Houston, TX
      • CHILLER

        CHILLER

          YUBA 1993, S/N 93-B-104-1, NB #6307. Area (sq ft): 12300 | Shell pressure (psi): 250 | Tube pressure (psi): 150 | Shell temperature (deg f): 200 | Tube temperature (deg f): 150 | Shell passes: SPLT | Tube passes:...

          Houston, TX
        • EFFLUENT WASTE HEAT BOILER

          EFFLUENT WASTE HEAT BOILER

            ENERGY EXCHANGERIN 1996; FIXED TUBE; S/N X-5555;NB#3461 WT: 105,400 LBS; DRAWINGS ON FILE

            Houston, TX
          • CO2 STRIPPER GAS REBOILER

            CO2 STRIPPER GAS REBOILER

              BY INDUSTRIAL FAB 1966; S/N 3076-3; CODED; EXTERNAL EXPANSION JOINT ON BOTTOM HEAD; WT: 50,000 LBS; DRAWINGS AND CODE PAPERS ON FILE

              Houston, TX
            • CONDENSER

              CONDENSER

                ONE (1) SURPLUS HEAT EXCHANGER; FULL VACUUM SHELL/TUBES; 2568 SQ. FT; WEDLDON; 1983; MODEL: 1STW30-198; SN: 2945L; NB: 3288. EST. WT: 10,000 lbs.

                Houston, TX
              • HEAT EXCHANGER

                HEAT EXCHANGER

                • Manufacturer: THERMOTRAN

                MFG. BY THERMOTRAN; BEAUMONT, TX; NB: 139; 1976; SN: H-1441; WT: 15,900 LBS; NOTE; NAME TAGE ATTACHED TO TOP NOZZEL.; CODE PAPERS ON FILE.

                Houston, TX
              • BOILER FEED WATER HEATER

                BOILER FEED WATER HEATER

                  BY EFCO; S/N S14019; NB# 889 BUILT 1966; WT: 24,000 LBS; DRAWINGS AND CODE PAPERS ON FILE;

                  Houston, TX
                • EXCHANGERS 106834

                  EXCHANGERS 106834

                  • Manufacturer: DOOSAN MFG CO IN 1997, TUBE SHEETS CLAD 304SS

                  MFG. BY DOOSAN MFG. CO. IN 1997, TUBE SHEETS CLAD 304SS;

                  Cleveland, TX
                • EXCHANGERS 106833

                  EXCHANGERS 106833

                  • Manufacturer: SOUTHERN HEAT EXCHANGER CORP IN 2009, TUBE SHEET CLAD WITH TP 304, BAFFLES SA 36, TIE RODS SA 36

                  MFG. BY SOUTHERN HEAT EXCHANGER CORP. IN 2009, TUBE SHEET CLAD WITH TP 304, BAFFLES SA 36, TIE RODS SA 36;

                  Cleveland, TX
                • 1985 SHM 1400 55" Wide

                  1985 SHM 1400 55" Wide Fixed Bed Sheeter

                    Single Shaft Unwind Upgraded gear box 48-inch (1200 mm) Pile height Sheet Width 55-inch (1400mm) inch maximum Sheet Length 60-inch (1575mm) maximum (3) Tidland Slitters Rated to 1000 FPM (335m/min) maximum mechan...

                    Dallas, TX
                  • EXCHANGERS 92434

                    EXCHANGERS 92434

                    • Manufacturer: MANNING AND LEWIS

                    MFG. BY MANNING AND LEWIS; 304SS SHEETS; MOUNTED ON SADDLES;

                    Cleveland, TX
                  • EXCHANGERS 101048

                    EXCHANGERS 101048

                    • Manufacturer: PATTERSON KELLY

                    #3 STRIPPER CONDENSER; MFG. BY PATTERSON KELLY; 304SS TUBE SHEET;

                    Cleveland, TX
                  • EXTRUDERS 109101

                    EXTRUDERS 109101

                    • Manufacturer: Welex

                    54" WELEX 5 LAYER EXTRUSION SHEET LINE INCLUDING: MCQUIRE BLENDER FEEDER; (1) 3.5" WELEX EXTRUDER, 36:1 L/D, VENT WITH DC MOTOR AND SCREEN CHANGER, (2) 2.5" WELEX EXTRUDERS, 30:1 L/D WITH DC MOTORS, (1) 2" WELE...

                    Cleveland, TX
                  678910

                  Overview

                  Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

                  FAQ

                  What should I consider when buying used processing equipment?

                  Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

                  How do I arrange shipping for processing equipment?

                  Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

                  What is the typical maintenance for processing equipment?

                  Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.