Processing » Texas

Search By Category

Search By Manufacturer

Building Filters

720

Used controllers in Texas, USA

  • DRYERS 113950

    DRYERS 113950

    • Manufacturer: Niro

    Used GEA Niro Inc. spray drying plant. Built in 2009. 3400 lbs/hr. 20' Diameter x 16' cylindrical height drying chamber, 60° cone bottom provided with rotary valve. 51% feed solids, 50 deg. F. feed temperature. 1...

    Cleveland, TX
  • MYCOM 240 Ton Dual Screw

    MYCOM 240 Ton Dual Screw Compressor ammonia package: Item#: C78891

    • Manufacturer: Mayekawa-Mycom

    Mycom Ammonia Dual Screw Compressor ammonia Package Two compressors and 2 motors on single oil separator Compressors Model 250 VSD Driven by 2 X 350 hp dual Weg electric motor Base mounted complete. Includes: ...

    Houston, TX
  • CENTRIFUGE, PUSHER, BIRD, M500, 2-STAGE,

    CENTRIFUGE, PUSHER, BIRD, M500, 2-STAGE, 500MM-20'', 316LSS, 40HP & 20HP [2]

    • Manufacturer: Bird

    CENTRIFUGE, PUSHER, BIRD, M500, 2-STAGE, 500MM-20'', 316LSS, 40HP & 20HP [2] Local control panel, original, not refurbished. Reconditioning available. 2 stage.

    Alvin, TX
  • Trusted Seller
    Mextrade Vibratory Screeners

    Mextrade Vibratory Screeners

    • Manufacturer: Mextrade

    New or used, we can find it for you! Circular vibratory screeners (also called separators and sieves) separate bulk solid materials from solids and slurries using multi-plane, inertial vibration that causes parti...

    Fort Worth, TX
  • Frick RXB39 Freon Screw Compressor

    Frick RXB39 Freon Screw Compressor Package

    • Manufacturer: Frick

    Qty: (2) available This is a Frick RXB-39 factory-assembled screw compressor package configured for Freon refrigerant service. It is built around the Frick XJS-120 rotary screw compressor, designed for medium to ...

    Houston, TX
  • Kobe Screw Compressor and FES

    Kobe Screw Compressor and FES 700 HP Motor

    • Manufacturer: -FES

    FES Screw Compressor Package FES 28M Compressor 28M Kobe driven by 700 HP 460 volt 3600 RPM electric motor Includes : oil separator and Oil Pump a Ammonia Serial AB10053 voltage 460 Condition : Was working prior ...

    Houston, TX
  • Frick Ammonia Screw Compressor Package

    Frick Ammonia Screw Compressor Package Model: RBD-134B

    • Manufacturer: Frick

    Frick Ammonia Screw compressor Booster Package Make: Frick/ York Model: Frick Ammonia Screw Compressor Package Model RBD-134B Compressor Model: TDSL 193L Driven by 100HP, 3600 RPM, 460 Volt motor Refrigerant: R7...

    Houston, TX
  • AQUA -AEROBIC SYS. DISK FILTER

    AQUA -AEROBIC SYS. DISK FILTER

    • Manufacturer: Aqua-Aerobic Systems, Inc.

    ONE (1) SURPLUS DISK FILTER MFG BY AQUA-AEROBIC SYSTEMS, INC. COMPLETE WITH AN INTERGRATED PNEUMATIC CONTROL SYSTEM. FOUR (4)DISK WITH SPRAY BAR. MODEL: ADP-4E; SN: 105034. DRAWINGS AND INFORMATION ON FILE.

    Houston, TX
  • GEA (WESTFALIA SEPARATOR) CD-205-0032 108642

    GEA (WESTFALIA SEPARATOR) CD-205-0032 108642

    • Manufacturer: GEA
    • Model: CD

    MFG. IN 2011; 316SS WETTED PARTS; MAIN MOTOR: 7.5 KW @ 3600 RPM; 460 VOLTS; SECONDARY MOTOR: .75 KW @ 510 - 2610 RPM; 460 VOLTS; 5500 RPM BOWL SPEED; 14.5 - 26.5 RPM DIFFERENTIAL SPEED; WITH CONTROL PANEL;

    Cleveland, TX
  • no-image_en.png

    1990 Van Dorn HT-400, model 400-RS-30F-HT, Toggle 400-ton inj molding mach w/ Conair robot #2310

    • Manufacturer: Van Dorn Demag
    • Model: 400RS30F

    Asset Description Notes: Van Dorn Injection Molding Machine Includes Conair Martin Robot QN300 400 Ton, Shot Size 30 oz. Series: HT Model: 400-RS-30F-HT; New: 1990 Control: Pathfinder EL; Purchased Recondition fr...

    $35,000 USD

    Get financing

    Est. $659/mo

    Texas, USA
  • Trusted Seller
    BME 2 Row Sandwich Machine

    BME 2 Row Sandwich Machine

    • Manufacturer: BME

    The BME 2 Row Sandwich Machine is designed for effective and efficient biscuit sandwiching operations. It features a robust main unit, controlled by motors and a PLC system, with a stainless-steel touchscreen for...

    $45,000 USD

    Get financing

    Est. $847/mo

    Houston, TX
  • Trusted Seller
    1984 Sharples PM75000

    1984 Sharples PM75000

    • Manufacturer: Sharples
    • Model: PM75000

    Sharples PM75000 Decanter - (2) Units available. RECONDITIONED - WARRANTY. Rated at 270 gpm. CENTRIFUGE 29 inch x 92 inch with Gear Units, (95 to 1). Material stainless steel ss316/ss317. Max bowl speed 2600 R...

    Texas, USA
  • Trusted Seller
    Webb 40-Ton Turning Roll Set

    Webb 40-Ton Turning Roll Set - New

    • Manufacturer: Webb

    New Webb 40-Ton Turning Roll Set Model: R1000 (Set) Driver: R1000-PWR20 Idler: R1000-IDL20 1 Driver / 1 Idler : 80,000lb Capacity 1 Driver / 2 Idler : 100,000lb Capacity 6'' - 20 ft Diameter Range 14'' of Surface...

    South Houston, TX
  • AQUAFINE CSL-4R 91967

    AQUAFINE CSL-4R 91967

    • Manufacturer: Aquafine
    • Model: CSL

    ELECTRONIC LIQUID SENSOR; U-V SENSOR; ; 120 VOLTS; 2 AMPS; 2" INLET; 2" OUTLET; (4) U-V LAMPS; 304SS CONTROL CABINET; 316LSS TREATMENT CHAMBER; 120 PSIG MAX. OPERATING PRESSURE; FLOW RATE 40 GPM (@ 94% UVT), 50 ...

    Cleveland, TX
  • Frick Screw Compressor Package Model

    Frick Screw Compressor Package Model RWF 270 B compressor SGC 2321

    • Manufacturer: Frick
    • Model: RWF

    Frick ammonia screw package model RWF 270 Booster package – using compressor SGC 2321 driven by Ram electric motor 460 volt 60 HZ Working takeouts and stored on site capped off for future needs Compressor model ...

    Houston, TX
2223242526

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.