Processing » Texas

Search By Category

Search By Manufacturer

Building Filters

721

Used process engineering in Texas, USA

  • 2021 Cummins 230kW DSHAD Diesel

    2021 Cummins 230kW DSHAD Diesel Generator Standby Genset & Fuel Tank 227/480V

    • Manufacturer: Cummins

    Cummins 230kW DSHAD Diesel Generator Genset: Diesel, 60Hz, 230kW- Standby Rating • Model: DSHAD 230kW • Duty Rating: Standby Power • Listing: UL 2200 • Emissions: Cert, EPA, Tier 2, NSPS Compression Ignition...

    $44,900 USD

    Get financing

    Est. $845/mo

    San Antonio, TX
  • QTY. 4. BALSTON COMPRESSED AIR

    QTY. 4. BALSTON COMPRESSED AIR AND GAS IN-LINE FILTERS MODEL NO. 944 MAX PRESSURE RATING: 150 PSIG AT 130F (55C) P1590. .

    • Manufacturer: Parker Balston/Whatman

    QTY. 4. BALSTON COMPRESSED AIR AND GAS IN-LINE FILTERS MODEL NO. 944 MAX PRESSURE RATING: 150 PSIG AT 130F (55C) P1590. .

    Texas City, TX
  • Sonitek S-10 Ultra SU-10 LB

    Sonitek S-10 Ultra SU-10 LB Thermal Hot Heat Staking Press AS-IS Partially Works

    • Manufacturer: Sonitek

    “Controller gives an error, partly working!” Home Contact About Technology Industrial Lab & Test Electrical Semiconductor Sonitek S-10 Ultra SU-10 LB Thermal Hot Heat Staking Press AS-IS Partially Works Manufactu...

    $2,000 USD
    Leander, TX
  • HONEYWELL,V4046C-1047,MAGNETIC GAS VALVE ASSEMBLY 1/4

    HONEYWELL,V4046C-1047,MAGNETIC GAS VALVE ASSEMBLY 1/4 INCH 10PSI PRE-OWNED

    • Manufacturer: Honeywell

    HONEYWELL,V4046C-1047,MAGNETIC GAS VALVE ASSEMBLY 1/4 INCH 10PSI PRE-OWNED What's Included? See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in ...

    $30 USD
    Houston, TX
  • Sonitek S10 Ultra SU-10 LB

    Sonitek S10 Ultra SU-10 LB Thermal Hot Heat Staking Press AS-IS Partly Working

    • Manufacturer: Sonitek

    “Controller gives an error, partly working!” Home Contact About Technology Industrial Lab & Test Electrical Semiconductor Sonitek S10 Ultra SU-10 LB Thermal Hot Heat Staking Press AS-IS Partly Working Manufacture...

    $2,000 USD
    Leander, TX
  • FANUC AC SPINDLE MOTOR A06B-0859-B200#3000,

    FANUC AC SPINDLE MOTOR A06B-0859-B200#3000, 22KW, 6000RPM

    • Manufacturer: Fanuc

    📍 Location: Monterrey, MX ✅ Warranty: No formal warranty is offered, but the indicated condition is guaranteed. 🚚 Shipping: Can be quoted or the buyer can pick it up at the warehouse. TECHNICAL SPECIFICATIONS * B...

    Laredo, TX
  • Trusted Seller
    IGS INNOVATIVE GAS SYSTEMS OXISWING

    IGS INNOVATIVE GAS SYSTEMS OXISWING OS-40 OXYGEN GENERATOR M4033

    • Manufacturer: IGS INNOVATIVE GAS SYSTEMS

    Item in excellent condition, work hours 1752 Extra Information Brand: IGS INNOVATIVE GAS SYSTEMS MPN: OXISWING OS-40 Voltage: 120 VAC Shipping Weight: 2,600 LBS Shipping Dimensions: 92 (in) ...

    $7,500 USD

    Get financing

    Est. $147/mo

    El Paso, TX
  • Trusted Seller
    Pump, Fire Pump, Diesel, 2200

    Pump, Fire Pump, Diesel, 2200 GPM, 6”, Holland, 6VABP, #5991253

    • Manufacturer: Holland

    Holland Pump diesel-driven fire pump, Model 6VABP-DZ4-C3-F, features a 6" vacuum-assisted bypass pump with a capacity of up to 2,200 GPM and heads to 65 ft. It is designed to handle solids up to 4” in diameter an...

    Texas, USA
  • Trusted Seller
    AO SMITH VWH0500N-P VF SERIES

    AO SMITH VWH0500N-P VF SERIES COMMERCIAL NATURAL GAS WATER HEATER M2781

    • Manufacturer: A.O. Smith

    Selling as pictured, removed from government contractor facility. Extra Information Brand: AO Smith MPN: VWH0500N-P Voltage: 120 VAC Shipping Weight: 590 LBS Shipping Dimensions: 44 (in) ...

    $2,640 USD
    El Paso, TX
  • SEIBU GIKEN,SSCR-U,DESICCANT ROTOR NOS

    SEIBU GIKEN,SSCR-U,DESICCANT ROTOR NOS

    • Manufacturer: Giken

    What's Included? See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in the photos then it will not be included with the item. 30-Day Easy Returns ...

    $600 USD
    Houston, TX
  • Trusted Seller
    2011 Gardner Denver PAH 5k

    2011 Gardner Denver PAH 5k Triplex Well Service Pump Skid

    • Manufacturer: Gardner Denver

    2011 Gardner Denver PAH Triplex Well Service Pump Skid - Gardner Denver PAH Triplex Pump - 5” Pistons and Liners - Detroit Diesel Series 60, 12.7L - Serial 06RE130583, (Remanufactured by Stewart & Stevenson 11/...

    $105,000 USD

    Get financing

    Est. $1,976/mo

    South Texas, TX, USA
  • EVCO S85

    EVCO S85

    • Manufacturer: Caterpillar

    Evco S85 powered by all mechanical Cat 4cyl diesel. Hydraulic powered hose reels, remote control panel and mounted on goose neck trailer. We just check this one out and it works well. Engine runs good, all contro...

    San Angelo, TX
  • 2008 BOWEN 2.5

    2008 BOWEN 2.5

    • Manufacturer: Bowen

    Used Bowen S-85 powered by a C4.4 Caterpillar diesel engine. We have installed new seals, wash-pipe and packing in the swivel and serviced it. The engine has a rebuilt diesel injection pump, new starter and have ...

    San Angelo, TX
  • 2001 Bowen 2.5

    2001 Bowen 2.5

    • Manufacturer: Bowen

    This is a used/refurbished Bowen 2.5 unit built by Precision Pump on 12-13-2001, powered by a Cummins BT 3.9 diesel engine s/n: 46082450. Hour meter shows 3301. We replaced the engine belt tensioner, belt and s...

    San Angelo, TX
  • PROCESS UNITS/LINES 96527

    PROCESS UNITS/LINES 96527

    • Manufacturer: Gas Atmospheres

    "AS IS, WHERE IS"; HYDROGEN SKID MFG. BY GAS ATMOSPHERES IN UNIT XIV; CAPACITY; 3000 SCFH H2; (72,000 SCFD); 99.8% PURITY; HYDROGEN PRESSURE: 350 PSIG; NATURAL GAS REQUIREMENTS: 750 SCFH FOR PROCESS; 650 SCFH FOR...

    Cleveland, TX
1314151617

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.