Processing » Slovakia

Building Filters

72

Used controller in Slovakia

  • Demag Ergotech 200/560-840 concept(year 2002)

    Demag Ergotech 200/560-840 concept(year 2002)

    • Manufacturer: Demag
    • Model: Ergotech

    Demag Controll: NC4 Model: Ergotech 200/560-840 concept Year : 2002 Clamping force: 200 ton Tie bar distance: 560x560mm Screw dia: 30mm Hours: 50.000 Core pullers: 1 hydraulic Pneumatic valve: 1 pc Poss...

    Trenčín, Slovakia
  • RESERVED HAITIAN JUII 6500/2950 (year

    RESERVED HAITIAN JUII 6500/2950 (year 2014) SERVO - reserved

    • Manufacturer: HAITIAN

    HAITIAN JUII 6500/2950 SERVO (Frequency invertor pump control) Clamping force: 650 ton Min/max mould height: 400-950 mm Max Opening: 1350mm Tie bar distance: 1040x910 mm Screw: 65mm Shot volume: 1068cm3 Co...

    Trenčín, Slovakia
  • RESERVED: Arburg 1200T-800-150 (vertical) ,

    RESERVED: Arburg 1200T-800-150 (vertical) , screw: 30 mm/ only 24.000 hours

    • Manufacturer: Arburg

    Clamping force: 80 tons Mould height: 300 mm Distance between platens: 600 mm Table diameter: 1200 mm Screw diameter: 30 mm Injection volume: 71 cm3 Shot wight (PS): 65 g Equipment: Cores: 2x Heating zon...

    Slovakia
  • RESERVED: 1998 Arburg Allrounder 320

    RESERVED: 1998 Arburg Allrounder 320 M 500 - 210, 50 t

    • Manufacturer: Arburg

    NEGOTIABLE PRICE! Clamping force 50 t Srew 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 101 ccm Control Multronica Core pullers - no Hotrunner zones ...

    Slovakia
  • 1998 Arburg Allrounder 420 M

    1998 Arburg Allrounder 420 M 800 - 225, 80 t

    • Manufacturer: Arburg
    • Model: 420 M

    NEGOTIABLE PRICE! Clamping force 80 t Srew 30 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 0,5 t Shot capacity 106 ccm Control Multitronica Core pullers - no Hotrunner zone...

    Slovakia
  • 2001 Arburg Allrounder Selecta 320

    2001 Arburg Allrounder Selecta 320 S 500 - 150, 50 t

    • Manufacturer: Arburg

    NEGOTIABLE PRICE! Clamping force 50 t Screw 30 mm Mold height min 225 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 78 ccm Control Selogica Core pullers - 1 Hotrunner zones - 9...

    Slovakia
  • Arburg 420 M 1000 -

    Arburg 420 M 1000 - 250, 100 t (1996)

    • Manufacturer: Arburg
    • Model: 420 M

    NEGOTIABLE PRICE! Clamping force 100 t Screw 40 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 188 ccm Control Multronica Core pullers - 1 Hotrunner zones...

    Slovakia
  • RESERVED 1997 Arburg 420M 1000-250,

    RESERVED 1997 Arburg 420M 1000-250, 100 t

    • Manufacturer: Arburg
    • Model: 420 M

    NEGOTIABLE PRICE! Clamping force 100 ton Srew 30 mm Mold height min 250 mm distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 106 ccm Weight 3230 kg, L x W 4100x1270 mm control Multroni...

    Slovakia
  • New temperature unit 2023 Single

    New temperature unit 2023 Single Compact WK3-160-9-50

    • Manufacturer: Single

    Max. temperature: 160° Heating power: 9kW Cooling power: 50kW Flow rate: 38 l/min Pump: magnetic clutch controller: SBC-Tplus flow measurement Current interface 20mA , TTY; Protocol selectable; Plug 16 A/...

    Slovakia
  • Demag EL-EXIS S 100/420-310 hybrid

    Demag EL-EXIS S 100/420-310 hybrid (year 2005)

    • Manufacturer: Demag

    Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamp...

    Slovakia
  • 2003 Arburg Allrounder Centex 320

    2003 Arburg Allrounder Centex 320 C 500 - 250, 50 t

    • Manufacturer: Arburg
    • Model: 320 C

    Clamping force 50 ton Screw 30 mm Mold height min 200 mm distance between tie bars 320 mm Daylight between platens 320 mm Mould weight max 0,5 t Shot capacity 106 ccm Weight 2330 kg, L x W 3520x1460 mm co...

    Slovakia
  • Arburg Allrounder CENTEX 420 C

    Arburg Allrounder CENTEX 420 C 1000 - 350, 100 t (2003)

    • Manufacturer: Arburg
    • Model: 420 C 1000-350

    Clamping force 100 t Screw 45 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 230 ccm Control Selogica Core pullers - 2 Hotrunner zones - 12 Weight 3430 kg...

    Slovakia
  • 1996 Arburg Allrounder 320 M

    1996 Arburg Allrounder 320 M 500 - 90, 50 t, missing system card

    • Manufacturer: Arburg

    NEGOTIABLE PRICE! Is sold in condion as is - Card: system missing Clamping force 50 t Srew 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 71 cmm Control...

    Slovakia
  • 2003 Arburg Allrounder Centex 320

    2003 Arburg Allrounder Centex 320 C 500 - 250, 50 t

    • Manufacturer: Arburg
    • Model: 320 C

    Clamping force 50 t Screw 30 mm Mold height min 200 mm Distance between tie bars 320 mm x 320 mm Mould weight max 0,5 t Shot capacity max 106 cca Control Selogica Core pullers - no Hotrunner zones - 12 W...

    Slovakia
  • (2006) Battenfeld HM 210/1000 S,

    (2006) Battenfeld HM 210/1000 S, 50 mm , robot Apex

    • Manufacturer: Battenfeld

    Model: HM 210/1000 S Clamping force: 210 t Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 ...

    Slovakia
12345

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.