Used attachments in Saxony, Germany

Conveyor belt 2 m #B15791

belt width approx. 620 mm conveyor belt, flat belt used length approx. 2200 mm Due to our own special machine construction we are able to attach a corresponding gear motor or make other modifications. Changes and...

Centrifugal fan #B17188

Manufacturer Küenle Type MXE 031-003530 315 Pa / 35 m³/min Output 315 Pa / 35 m³/min Motor 2.2 kW / 2890 rpm / 400 V Inlet and outlet 200 mm with attached throttle damper Subject to changes and errors in technica...

Hengstebeck & Eich GmbH HKG 2000-130°

• Manufacturer: Hengstebeck & Eich GmbH

Payload max 2000 kg Swivel angle approx. 130° Hydraulic tipping device, electro-hydraulic tipping device, container tipping device used a small compact hydraulic unit is attached to the tipping device Subject to ...

Electro-hydraulic tilting device stainless steel #B16814

Hydraulic tilting device, electro-hydraulic tilting device made of stainless steel used stainless steel Payload approx. 300 to 500 kg Collecting channel in the tipping area a small compact hydraulic unit is attac...

2004 Gyro ZST 250x400-21LU

• Manufacturer: Kreisel

Stainless steel rotary valve dosing valve used EX II2/3Dc 80°C With offset bearings, stuffing boxes and attached speed monitoring. without drive motor, this can be offered separately and also adapted Total approx...

2013 DGS SSF650P50

• Manufacturer: DGS
• Power requirement: 3.5 kW

Slat-band chain conveyor With coolant tank incl. pump output 250 l/min. sufficient for a conveying height of 25m. Very good little used condition. Chip intake length Ax= 3000mm (attachment with sheet metal tray w...

2010 IOB AUE EKO 60/40/150-36

• Manufacturer: IOB AUE

ex Works, loaded free, truck total power requirement 38 kW degree ....500 Grad weight of the machine ca. 2,5 t

2017 NOLZEN KLWg 220/180/650

• Manufacturer: Nolzen

ex site, plus dismantling degree 700 Grad Delivery: by arrangement | Control type: conventional

2013 DGS SSF650P50

• Manufacturer: DGS
• Power requirement: 3.5 kW

hinged type chip conveyor, as good as new With coolant tank incl. pump (submersible centrifugal pump) Delivery rate 250 l/min. = sufficient for a conveying height of 25m Chip insertion length (A) 3000mm (attachme...

Hydraulic system hydro pump hydraulic unit control valves control blocks #27425

• Manufacturer: Bosch

Bosch 0514802213 ABB motors 380/660V, 55kW. Hydraulic system hydraulic power unit 55Kw ,22 Kw , 2,2 Kw used with Bosch pumps and various other attachments see pictures with Bosch oil filter with Bosch directional...

TRANSMITAL BONFIGLIOLI 311 238.8PZP225EVOA

• Manufacturer: Bonfiglioli

TRANSMITAL BONFIGLOILI 45 kW / 37 rpm. B3 foot mounting TRANSMITAL BONFIGLIOLI gear motor B3 45 kW 54 rpm used E-motor 45 kW 1470 rpm 380/480 V; 11,4/6,6 A; 50 Hz; IP55 Gearbox: The gear motor was used as extrude...

TRIA 32-25 TD/SL similar to XT30

• Manufacturer: Tria

Plastic shredder, plastic garanulator, laboratory grinder, side grinder used. Inlet approx. 300 x 300 mm infeed height 1650 mm Cutting drum approx. 300 x 300 mm Capacity approx. 200 kg/h depending on material con...

TRIA 32-25 TD/SL similar to XT30

• Manufacturer: Tria

Plastic shredder, plastic garanulator, laboratory grinder, side grinder used. Inlet approx. 300 x 300 mm infeed height 1650 mm Cutting drum approx. 300 x 300 mm Capacity approx. 200 kg/h depending on material con...

TRIA 32-25 TD/SL similar to XT30

• Manufacturer: Tria

Plastic shredder, plastic garanulator, laboratory grinder, side grinder used. Inlet approx. 300 x 300 mm infeed height 1650 mm Cutting drum approx. 300 x 300 mm Capacity approx. 200 kg/h depending on material con...