Processing » Pennsylvania

Search By Category

Search By Manufacturer

Building Filters

2493

Used processing in Pennsylvania, USA

  • 1952 BIRDSBORO FURNACE PUSHER

    1952 BIRDSBORO FURNACE PUSHER

    • Manufacturer: BIRDSBORO

    Inventory id: 20073800000 | Feature 1: ALREADY DISMANTLED

    Pittsburgh, PA
  • 2007 60 CFM HANKISON HHL

    2007 60 CFM HANKISON HHL 60 INDUSTRIAL AIR DRYER, USED AIR COMPRESSORS AND DRYERS, USED AIR COMPRESSORS AND DRYERS

    • Manufacturer: SPX Hankison

    Inventory id: 11336000000 | Capacity: 60 | Pressure: 100 | Type (rot screw/ reciprocating): DESSICANT | Length: 32 | Width: 32 | Height: 61 | Weight: 492 | Features1: NEW, NEVER USED | Features2: 1" NPT INLET / ...

    Pittsburgh, PA
  • 16" (406 MM) BAR MILL

    16" (406 MM) BAR MILL ROLL FOR 1/2" REBAR

    • Manufacturer: UNITED ENGINEERING

    Inventory id: 10746300900 | Rolls: 2 | Size (dia): 16 | Size (face): 24 | Type (work, intermediate, backup): WORK | Material composition: CAST IRON | Overall length: 63 | Shaft diameter drive end: 6.87 | Shaft d...

    Pittsburgh, PA
  • 1982 36" (914 MM) WIDE

    1982 36" (914 MM) WIDE X 18" (457 MM) DIA. ECOLAIRE TABLE

    • Manufacturer: BAUER GEAR

    Inventory id: 10765300600 | Table width: 36 | Roll face: 36 | Roll diameter: 18 | Length: 38.5 | Drive arrangement: INDIVIDUALLY DRIVEN | Number of rolls: 8 | Roll spacing: 66 | Roll fabrication (solid, hollow):...

    Pittsburgh, PA
  • 1997 26' X 24" WIDE

    1997 26' X 24" WIDE HYTROL MODEL TA BELT CONVEYOR

    • Manufacturer: Hytrol
    • Model: TA

    Inventory id: 20065100000 | Table width: 24" | Roll face: 28" | Length: 26' | Drive arrangement: CENTER DRIVE | Number of rolls: N/A | Roll spacing: 28" BELT SUPPORT ROLLERS | Roll fabrication (solid, hollow): H...

    Pittsburgh, PA
  • 1980 60" (1525 MM) WIDE

    1980 60" (1525 MM) WIDE WEAN/CCI CONTINUOUS HOT DIP GALV LINE

    • Manufacturer: WEAN/CCI

    Inventory id: 20034000000 | Entry coil width max: 60 | Years when upgrades performed: 2011 | Description of upgrades: GALVANIZING SECTION BY CCI | Capacity: 250,000 | Material: GALVANIZED STEEL COILS | Type (no...

    Pittsburgh, PA
  • 157' INDIVIDUALLY DRIVEN ROLLER TABLE

    157' INDIVIDUALLY DRIVEN ROLLER TABLE WITH APRON AND SIDE GUIDES, 24" FACE X 9-1/2" DIA

    • Manufacturer: SMS Eumuco

    Inventory id: 20053800000 | Table width: 24 | Roll face: 24 | Roll diameter: 9.5" WITH 1" WIDE LIP | Length: 157' | Drive arrangement: INDIVIDUALLY MOTOR DRIVEN | Roll spacing: 67 | Roll fabrication (solid, holl...

    Pittsburgh, PA
  • 2013 87 FT INDIVIDUALLY DRIVEN

    2013 87 FT INDIVIDUALLY DRIVEN BILLET ROLLER TABLE, 22" ROLLS, 14" FACE, 13" DIA

    • Manufacturer: SMS / MEER

    Inventory id: 20090300200 | Roll face: 14" | Roll diameter: 13" | Number of rolls: 22 | Motor volts: 460V | Motor voltage type (ac / dc): AC | Previous use: PREVIOUS APPLICATION WAS TO TRANSFER COLD BILLETS FROM...

    Pittsburgh, PA
  • 2013 (2) HYDRAULIC BILLET PUSHERS

    2013 (2) HYDRAULIC BILLET PUSHERS FOR 70 TPH FURNACE

    • Manufacturer: SMS / MEER

    Inventory id: 20090300300

    Pittsburgh, PA
  • 1993 63 FEET OF INDIVIDUALLY

    1993 63 FEET OF INDIVIDUALLY DRIVEN ROLLER TABLE FOR ANGLES, CHANNELS, AND FLATS

    • Manufacturer: Simac

    Inventory id: 20081800200 | Roll face: 31.5" | Roll diameter: 10.5" | Number of rolls: 16 ROLLS ON 47" CENTERS | Gearbox ratio: 31.36 / 1 RATIO REDUCER | Motor hp: 1 HP | Motor rpm: 56 RPM | Motor voltage type (...

    Pittsburgh, PA
  • 2012 MUELLER AT40-LF-150 HEAT EXCHANGER

    2012 MUELLER AT40-LF-150 HEAT EXCHANGER

    • Manufacturer: Mueller

    Inventory id: 20087800000 | New arrival: Y | Type or description: PLATE TYPE HEAT EXCHANGER | Pump type (gear, etc): RECIRCULATION | Body material (steel, iron): STEEL / STAINLESS PLATES | Previous use: WATER CO...

    Pittsburgh, PA
  • 1982 PANGBORN MODEL 310MR-821 SHOT

    1982 PANGBORN MODEL 310MR-821 SHOT BLASTER AND WORK ROLL ETCHER (NCO), AUTOMATED SHOT BLASTER, BATCH SHOT BLASTER, MANUAL SHOT BLASTER

    • Manufacturer: Pangborn
    • Model: 310 MR-821

    Inventory id: 20068400000 | Product size: 19 1/4" MIN TO 33 1/2" MAX | Blasting medium: G-25A (12,000LBS), G-40A (16,000LBS), G-80 A (10,000LBS) | Drive motor hp: 30 | Drive motor rpm: 2500 | Drive motor voltage...

    Pittsburgh, PA
  • 2013 700,000 CFM SCHUST ENGINEERING

    2013 700,000 CFM SCHUST ENGINEERING BAGHOUSE (NCO)

    • Manufacturer: SCHUST ENGINEERING

    Inventory id: 20034100000 | Capacity: 700,000 | Capacity per compartment: 70,000 | Type (shaker / reverse air / pulse air): REVERSE AIR | Number of compartments: 10 | Number of bags per module: 300 | Total numbe...

    Pittsburgh, PA
  • 1988 180,000 CFM PANGBORN BAGHOUSE

    1988 180,000 CFM PANGBORN BAGHOUSE (NCO)

    • Manufacturer: Pangborn

    Inventory id: 10833800100 | Capacity: 180,000 | Capacity per compartment: 13,850 | Type (shaker / reverse air / pulse air): REVERSE AIR | Number of compartments: 14 | Number of bags per module: 64 | Total number...

    Pittsburgh, PA
  • 30,000 CFM TWIN CITY MODEL

    30,000 CFM TWIN CITY MODEL BCN-SW BLOWER

    • Manufacturer: Twin City

    Inventory id: 20027300000 | Capacity: 30,000 | Pressure: 70 | Air/material handling/dust: AIR | Wheel dia: 66 | Drive type (direct/belts pulleys): DIRECT | Motor hp: 500 | Motor rpm: 1785 | Motor volts: 2300/416...

    Pittsburgh, PA
3738394041

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.