Processing » Ohio

Search By Category

Search By Manufacturer

Building Filters

477

Used roller in Ohio, USA

  • Trusted Seller
    21 METER PANGBORN THROUGH-FEED SHOT

    21 METER PANGBORN THROUGH-FEED SHOT BLAST MACHINE (1999)

    • Manufacturer: Pangborn

    Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999) Wheel Blast Cabinet 48" width Entry and Exit Roller Conveyor Dust Collector Pangborn 4-Wheel 30KW & 25KW Motors 21M Through-Feed Shot Blast Line (1999...

    Mansfield, OH
  • Trusted Seller
    78" (2000mm) x 2" (50mm)

    78" (2000mm) x 2" (50mm) x 20,000# GIETART SHOT BLASTING LINE

    • Manufacturer: Gietart Holland

    Manufacturer: Gietart Holland Year: 2002 Min. Thickness: 5mm Max Thickness: 50mm Max Width: 2000mm Max Weight: 10 Ton Complete Line with the Following Components: Entry Roller Conveyor Lenght: 17 Meter Shot Bas...

    Mansfield, OH
  • SAMUAL STRAPER MODEL 710 :

    SAMUAL STRAPER MODEL 710 : STOCK #77450

    • Manufacturer: SAMUAL

    ROLLER IN WORK TABLE .. YES Stock#: 77450 | Arch area: 33 "X 13-1/2" | Box dimension: 3.5" X 3.5" MINIMUM | Straps tension: 5.5 TO 154 LB | Strap width: 1/4" TO 5/8" | Phase: 1 | Voltage: 110

    Holland, OH
  • Hammer Mill Rotor 4701

    Hammer Mill Rotor 4701

      One (1) refurbished hammer mill shaft and rotor Built for American Pulverizer Co. 15 x 9 chamber 4 swinging hammers, 2.75" x 8" Outboard roller bearings 2nd unit available, item 4699

      Painesville, OH
    • Hammer Mill Rotor with Fly

      Hammer Mill Rotor with Fly Wheel 4699

        One (1) refurbished hammer mill shaft and rotor Built for American Pulverizer Co. 15 x 9 chamber 4 swinging hammers, 2.75" x 8" Outboard roller bearings Equipped with a fly wheel for increased inertia/force 2nd u...

        Painesville, OH
      • Tumble Blender 4667

        Tumble Blender 4667

          One (1) used Tumble Blender Stainless steel Chamber is 18" diameter x 29" deep 30 gallons or 4 cubic feet On stand with outboard roller bearings 1 hp gear reduced drive, 3 phase, 208-230/460 V Chain and sprocket ...

          Painesville, OH
        • 15 cu ft Double Ribbon

          15 cu ft Double Ribbon Blender 3104

            One (1) used 15 cu ft Double Ribbon Blender 24" wide x 60" long x 30" deep trough Center bottom outlet Ribbon and trough are rubber lined No drive included Shaft through bearing is 3.5" diameter Large heavy duty ...

            Painesville, OH
          • 15 HP Champion Products Hammer

            15 HP Champion Products Hammer Mill 3685

              One (1) used 15 HP Champion Products Hammer Mill 12" x 24" inlet Does not include a feed hopper Outboard roller bearings 4 rows of blades, 6 arms in each row Arms each have a set of bolt-on blades Equipped with a...

              Painesville, OH
            • Mitts and Merrill 300HP Hog

              Mitts and Merrill 300HP Hog Grinder 2758

              • Manufacturer: Mitts & Merrill

              One (1) used Mitts & Merrill Hog Grinder Model 13CSE 15" x 27" feed opening 18 knives Discharge screen has 0.44" diameter holes Equipped with outboard roller bearings Motor: 300 HP, 460 voltage, 3 phase, 1180 RPM...

              Painesville, OH
            • no-image_en.png

              8' ROLLER CONVEYOR: STOCK #71763

                Stock#: 71763

                Holland, OH
              • no-image_en.png

                30' ROLLER CONVEYOR: STOCK #76001

                  Stock#: 76001

                  Holland, OH
                • Refurbished 15" x 9" Type

                  Refurbished 15" x 9" Type L American Pulverizer Co. Hammer Mill 4708

                    One (1) used American Pulverizer Co. Hammer Mill Manufactured in St. Louis, MO Serial number: 3905 Type: L 15" diameter x 9" wide chamber 9" x 11" inlet New bolt in liner New hammers Equipped with 4 swinging hamm...

                    Painesville, OH
                  • 6' x 6' Steveco Pebble

                    6' x 6' Steveco Pebble Mill 4493

                    • Manufacturer: Steveco

                    One (1) used 6' x 6' Steveco Pebble Mill 6' diameter x 6' long chamber Alumina brick lined - good condition Roller bearings Equipped with pinion gear and bolt on bull gear 10" x 14" urethane grinding door and sta...

                    Painesville, OH
                  • 6' x 6' Steveco Pebble

                    6' x 6' Steveco Pebble Mill 4492

                    • Manufacturer: Steveco

                    One(1) used 6' x 6' Steveco Pebble Mill 6' diameter x 6' long chamber Alumina brick lined - good condition Roller bearings Equipped with pinion gear and bolt on bull gear 10" x 14" urethane grinding door and stan...

                    Painesville, OH
                  • 15 x 9 American Pulverizer

                    15 x 9 American Pulverizer Hammer Mill 4869

                      One (1) used 15 x 9 Hammermill Made by American Pulverizer Company Type L Serial number 5682 Four (4) swinging hammers Outboard roller bearings Opening at feed throat is 11" x 9.25" wide 5 HP belt driven motor, v...

                      Painesville, OH
                    2829303132

                    Overview

                    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

                    FAQ

                    What should I consider when buying used processing equipment?

                    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

                    How do I arrange shipping for processing equipment?

                    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

                    What is the typical maintenance for processing equipment?

                    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.