Processing » Ohio

Search By Category

Search By Manufacturer

Building Filters

1853

Used controllers in Ohio, USA

  • Trusted Seller
    Sweco 16" Vibratory Shaker -

    Sweco 16" Vibratory Shaker - Ls18s33p3

    • Manufacturer: Sweco
    • Model: LS18

    Made In Usa, W/iap Fume Exhaust, .25 Hp, 1140 Rpm Name: Vibratory Shaker | Arrival date: 09-29-2025 | Dimensions l x w x h (inches): 69 x 32 x 33 | Capacity: 16" | Electrical: 3/60/460 | Weight (lb.): 295 | Avail...

    $1,087 USD
    Euclid, OH
  • Trusted Seller
    Daiwa Dengyo Co 6.7kg Heat

    Daiwa Dengyo Co 6.7kg Heat Exchanger For Enclosed Cubicle Cooling - Mpx-07er-2p

    • Manufacturer: Daiwa Dengyo Co

    New, Open Box Name: Heat Exchanger For Enclosed Cubicle Cooling | Arrival date: 08-18-2025 | Dimensions l x w x h (inches): 29 x 13 x 13 | Capacity: 6.7KG | Electrical: -/50/60/200 | Weight (lb.): 16 | Available ...

    $66 USD
    Euclid, OH
  • Trusted Seller
    Cmi Coating Thickness Standard -

    Cmi Coating Thickness Standard - 219086

    • Manufacturer: CMI

    Used Name: Coating Thickness Standard | Arrival date: 10-06-2025 | Dimensions l x w x h (inches): 7 x 5 x 1 | Weight (lb.): 2 | Available quantity: 6

    $81 USD
    Euclid, OH
  • Trusted Seller
    Apiste Heat Exchanger - Enh-110l(r)-220

    Apiste Heat Exchanger - Enh-110l(r)-220

    • Manufacturer: Apiste

    New, Quantity 1 Name: Heat Exchanger | Arrival date: 07-25-2025 | Dimensions l x w x h (inches): 17 x 13 x 11 | Weight (lb.): 13 | Available quantity: 1

    $73 USD
    Euclid, OH
  • Trusted Seller
    Bosch Rexroth Power Line Filter

    Bosch Rexroth Power Line Filter - Nfd03.1-480-007

    • Manufacturer: Bosch - Rexroth

    New, Power Line Filter, 7 Amp, Made In Germany Name: Power Line Filter | Arrival date: 10-17-2025 | Dimensions l x w x h (inches): 12 x 7 x 3 | Electrical: 3/50/60 HZ | Weight (lb.): 3 | Available quantity: 1

    $100 USD
    Euclid, OH
  • 2002 Sencorp 2500

    2002 Sencorp 2500

    • Manufacturer: Sencorp

    EDGE HEATERS AVAILABLE SERVO INDEXING STEEL RULE TRIM STATION STACKER UNWIND STAND WEB WINDER PLATEN DRIVES (Hyd., Air,etc..) Pneumatic & Hydraulic

    Valley City, OH
  • 2006 Engel 330H/85 US

    2006 Engel 330H/85 US

    • Manufacturer: Engel

    Size: 85 | Shot size: 5.0 oz. | Clamp style: Vertical | Platen size: 21.65" x 13.22" | Dbtb: tie bar less | Daylight: 11.02 Min Max 22.83" | Hko: Yes | Controls: EC100 A03 | Configuration: horizontal injection |...

    Valley City, OH
  • Trusted Seller
    TRIPACK ST-1 Steam Tunnel Shrink

    TRIPACK ST-1 Steam Tunnel Shrink Sleever

    • Manufacturer: Tripack

    Units is USED. Some minor scratching/blemishes/streaking can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment and was functioning as...

    Hiram, OH
  • Yamato FO-710CR Standard Muffle Furnace

    Yamato FO-710CR Standard Muffle Furnace with communication port 23.6L 220V 18A no plug

    • Manufacturer: Yamato

    Condition: New. Ships directly from the manufacturer.Guarantee: Yamato's 15 Day Money Back Guarantee less 25% restocking fee.Warranty:1 Year manufacturers warranty Estimated lead time: In stock: Typically ships i...

    Medina, OH
  • 2016 Nissei FVX860III-600L

    2016 Nissei FVX860III-600L

    • Manufacturer: Nissei

    – Mold thickness (min.- max) 19.7-42.3 – 20,050 psi injection pressure – 7.9 ejector stroke

    Valley City, OH
  • Trusted Seller
    ABB CAPACITORS, INDUCTION FURNACE

    ABB CAPACITORS, INDUCTION FURNACE

    • Manufacturer: ABB

    ABB Capacitor, 4600 Kvar, 3000 V, 1 Phase, 300 Hz ABB No GES9506086, Cat. 19L1168WD4, Made By GE, USA. Quantity: 40 ++ Spare Capacitors from ABB 6000 Kw Power Supply

    Stow, OH
  • 2006 Van Dorn Titan 730

    2006 Van Dorn Titan 730

    • Manufacturer: Van Dorn Demag

    31,490 Max PSI Size: 730 | Shot size: 103.7 oz. | Clamp style: Hydraulic | Platen size: 57.1" x 57.1" | Dbtb: 42.3" x 42.3" | Daylight: 70.9" Max | Barrel/screw: 95mm | Hko: Yes | Core pull: Yes | Controls: NC-4 ...

    Valley City, OH
  • Trusted Seller
    Goessling 90° Up / Elevating

    Goessling 90° Up / Elevating / Z Conveyor | Screw / Bolt / Material Conveyor

    • Manufacturer: Correa

    Unit is USED / BUT IN VERY GOOD CONDITION. Conveyor shows very little signs of wear. Some scratching / blemishes / worn paint can seen on the conveyor. This unit has been tested as seen in the video and functions...

    Hiram, OH
  • Backers 3-Fraction Star Screen

    Backers 3-Fraction Star Screen

    • Manufacturer: Backers

    Produce three value-added products from just one single material stream with a Backers 3-fraction star screen. The Backers 3-fraction star screen generates huge volumes of precisely screened material at a very lo...

    Avon, OH
  • Trusted Seller
    Chester-Jensen Double Motion | Cooker

    Chester-Jensen Double Motion | Cooker / Cooler Model: 70N40

    • Manufacturer: Chester Jensen

    Unit is USED and in very good condition. The inside of the cooker/cooler has no heavy dried debris, and can be cleaned out very easily. Unit shows signs of some visible minor surface wear, scratching, along with ...

    Hiram, OH
2223242526

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.