Processing » Ohio

Search By Category

Search By Manufacturer

Building Filters

1837

Used controllers in Ohio, USA

  • 1971 Springfield SF-300

    1971 Springfield SF-300

    • Manufacturer: Springfield

    Extruder- 4.5″ 40 Hp Hydraulic Motor 107 kW Heating 2,000 psi Maximum Pressure 60″ Cylinder Stroke 20″ Cylinder Bore Thoreson-McCosh Vacuum Loader

    Valley City, OH
  • 1997 UBE UBEMAX 1000USW-127

    1997 UBE UBEMAX 1000USW-127

    • Manufacturer: UBE Industries

    Size: 1000 | Shot size: 132 oz. | Clamp style: Toggle | Dbtb: 60" x 50" | Daylight: Max 102.35" | Hko: Yes | Core pull: Yes | Controls: VersaView CE 1250H

    Valley City, OH
  • Trusted Seller
    Vulcan K6DTT 6-Gallon / 24-Quarts

    Vulcan K6DTT 6-Gallon / 24-Quarts 2/3 Jacketed Direct Steam Tilting Kettle On Floor Stand

    • Manufacturer: Vulcan Hart / ITW Food Equipment Group LLC.

    Unit is USED but in VERY GOOD CONDITION. Does have some visible minor surface wear and some minor scratches none affecting the functionality or the intended use of the unit. Inside of kettle is clean and free of ...

    Hiram, OH
  • Trusted Seller
    Pac-Press Model 470 | 31

    Pac-Press Model 470 | 31 / 470mm Plate Filter Press

    • Manufacturer: Pacific Press Co

    Unit is USED. Unit shows some signs of wear / rust / paint peeling / scratches but none effecting the intended use of the filter press. This unit was recently removed from service with no issues noted by the prev...

    Hiram, OH
  • Trusted Seller
    Burford Corp Model: SO72846 |

    Burford Corp Model: SO72846 | S.S. Bi-Directional Accumulation Table w/ 2-Motors

    • Manufacturer: Burford Corp.

    Unit is USED - GOOD CONDITION. Conveyor shows some signs of wear, scratching, but none affecting the intended use of the conveyor. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actua...

    Hiram, OH
  • 2017 Arburg 720S

    2017 Arburg 720S

    • Manufacturer: Arburg

    – With Multilift Select 16kg Robot X- 700 mm Y- 1,000 mm Z- 1,600 mm

    Valley City, OH
  • 1999 Van Dorn 1430CA165

    1999 Van Dorn 1430CA165

    • Manufacturer: Van Dorn Demag

    ***FULL REBUILD*** Warranty: VDU2 Controller–2 years on parts, 1 year on labor. Machine–6 months on parts and labor–excludes castings and wear items. Clean and paint in OEM colors with new decal package Platens c...

    Valley City, OH
  • Trusted Seller
    VC999 ST85.47i - Shrink Tank

    VC999 ST85.47i - Shrink Tank

    • Manufacturer: VC999

    Electronic control with language selection Stainless steel execution Easy change of flow direction Built-in, adjustable steam exhaust Double-walled with first class insulation Accurate water temperature and water...

    Strongsville, OH
  • 1995 Van Dorn 400HT-48

    1995 Van Dorn 400HT-48

    • Manufacturer: Van Dorn Demag
    • Model: 400HT

    Size: 400 | Shot size: 48 oz. | Clamp style: Toggle | Platen size: 42" x 42" | Dbtb: 28" x 28" | Daylight: Max. 54" | Hko: Yes | Core pull: Yes | Controls: VDU

    Valley City, OH
  • 2007 Husky HL500 RS95/80

    2007 Husky HL500 RS95/80

    • Manufacturer: Husky

    – Moving platen, 4 air, 1 hydraulic – Stationary platen, 4 air, 1 hydraulic – Stack mold capable

    Valley City, OH
  • Trusted Seller
    VC999 ST62 - Shrink Tank

    VC999 ST62 - Shrink Tank

    • Manufacturer: VC999

    The ST62 shrink tank works on the principle of synchronized immersion in hot water. This machine has been conceived for the smaller and medium sized business, but as far as efficiency, workability and finish are ...

    Strongsville, OH
  • 1996 Van Dorn 170HT

    1996 Van Dorn 170HT

    • Manufacturer: Van Dorn Demag
    • Model: 170HT

    Size: 170 | Shot size: 14 oz. | Clamp style: Toggle | Platen size: 29" x 29" | Dbtb: 20" x 20" | Daylight: Max 35" | Hko: Yes | Controls: VDU | Voltage: 230/460

    Valley City, OH
  • 2000 Roboshot 110i

    2000 Roboshot 110i

    • Manufacturer: Roboshot

    – Rebuilt clamp screw and bearing summer of ’24 by Milicron

    Valley City, OH
  • 2007 Arburg 270C 400-100

    2007 Arburg 270C 400-100

    • Manufacturer: Arburg
    • Model: 270 C 400-100

    Size: 44 | Shot size: 1 oz. | Platen size: 17.55" x 17.55" | Dbtb: 10.62" x 10.62" | Daylight: Max 21.65" | Hko: Yes | Controls: Selogica | Hours: 68,936

    Valley City, OH
  • 1999 Cincinnati VSX-55

    1999 Cincinnati VSX-55

    • Manufacturer: Cincinnati

    Size: 55 | Shot size: 4.44 oz. | Platen size: 24" x 22.2" | Dbtb: 15.95" x 14.17" | Daylight: Max 27.95 | Hko: Yes | Controls: Camac VSX | Hours: 58,000

    Valley City, OH
1213141516

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.