Used cell processing in New Jersey, USA

Lab Centrifuge Stainless Steel 316L Centritec Cell 8 - IPP# 239307

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert The system offers these advantages Single use, rapid changeover dispo...

1600 Gallon Jacketed Mixing Tank with Load Cells

• Manufacturer: Jacketed Mixing

This used 1600-gallon jacketed mixing tank, manufactured by Jacketed Mixing in 2013, is constructed from durable 304 stainless steel, ensuring long-lasting performance and resistance to corrosion. It features a m...

SK MFG WV-50KG

• Manufacturer: SK MFG

Used Approximately 13 Gallon Stainless Steel Reactor Capacity: 13 gallons Manufacturer: SK Model: WV-50KG Internal pressure: 45/FV @ 250°F (3 bar @ 123°C) Jacket pressure: 60FV @ 300°F (4 bar @ 150°C) Bottom driv...

Stainless Steel 316 Centrifuge-Lab - IPP# 239309

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

2013 SK MFG MV-100KG

• Manufacturer: SK MFG

Used Approximately 25 Gallon Stainless Steel Reactor Capacity: 25 gallons Manufacturer: SK MFG Model: MV-100KG Year: 2013 Internal pressure: 45/FV @ 250°F (3 bar @ 123°C) Jacket pressure: 60/FV@ 300°F (4 bar @ 15...

Stainless Steel 316L Centrifuge-Lab - IPP# 239308

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Plastic Carbon Steel - IPP# 230461

• Manufacturer: Una-Dyn

10,000 PPH, (max rate) high capacity weight blend system manufactured by Universal Dynamics, Inc. (Una Dyne). This unit consists of the following sub assemblies: Load Cell/weigh hopper, with blend bins. (Material...

Tower Chiller Galvanized - IPP# 706525

• Manufacturer: Torres

2 cell galvanised cooling tower 38 degrees C inlet temperature, 23 degrees C outlet temperature, 18 degrees C wet bulb temperature 3 phase fan driven by 16/3.7 kw, 442/221 rpm motor, fan diameter is 84", 20 degre...

Gas Generator 42.5 m3/h (25 CFM) - IPP# 103367

• Manufacturer: PCI Ozone Corp

50 lbs/day 25 scfm ozone generator Rated concentration 2% by wgt Dryer purge rate 4.5, air pressure 15 psi. Input power 3/60/460 volt Dewpoint -60 deg F or lower Required cooling water 8 gpm @ max temp of 70 deg ...

Stainless Steel 304 Allfill series 10 Filling Packaging - IPP# 706701

• Manufacturer: Allfill

filling (plastic buckets/drums), container sits on weigh cells and is controlled by touch screen PLC based weigh-fill control panel, fill head with raise/lower mechanism, approx 38ltr hopper capacity,

Stainless Steel 316L Alfa Laval BTPX 205SGD-34CDP Centrifuge-Disc Bowl - IPP# 239356

• Manufacturer: Alfa-Laval

Pharma grade GMP sanitary construction Designed for Biotech cell harvesting Rated 5 gpm on Pharma broth with a Broom Motors LTD Also includes a 1 m2 plate and frame heat exchanger manufactured by Sondex, rated fo...

RO and Ultra RO Filter Carbon Steel - IPP# 245822

• Manufacturer: Protecno

feed rate 27.50m3/hr, raw water flow to system 27.50 m3/hr, feed pressure 14.19 bar, flow factor 0.85, permeate flow 21m3/hr, recovery 76.36%, feed temperature 5 degrees C, feed TDS 408.99 mg/l, osmotic pressure ...

OLSA 266 LITRE

• Manufacturer: Olsa

Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels. Full hydraulic raise/...

2020 MEDIA BLAST N200-3030 CYCLONE SIPHON, 2020, 36" x 28" X 30"

• Manufacturer: MEDIA BLAST

MediaBlast U SA Made Model N-200 3030 Abrasive Sand Blast Cabinet S/N: 7628919 New: 2020 " N-200 Cyclone Siphon uses a pneumatic conveyor to keep the fine media dry & flowing, and a cyclone separator reclaimer t...