Used processing in New Jersey, USA

2014 K&E FABRICATING 1000 GALLON

• Manufacturer: K&E FABRICATING

Used Approximately 1,000 Gallon 316L Stainless Steel Reactor Manufacturer: K&E Fabricating Capacity: 1,000 gallons Year: 2014 Internal pressure: 250/FV @ 500°F Jacket pressure: 150 psi @ 500°F Material of constru...

ALLOY FABRICATORS 2,200 Gallon

• Manufacturer: ALLOY FABRICATORS

Used Approximately 2,200 Gallon 316L Stainless Steel Jacketed Mix Tank Manufacturer: Alloy Fabricators Capacity: 2,200 gallons Internal pressure: 15 psi @ 120°F Jacket pressure: 85 psi @ 120°F Dimensions: 84" dia...

2000 ALLOY FABRICATORS 2,200 gallons

• Manufacturer: Alloy

Used Approximately 2,200 Gallon 316L Stainless Steel Jacketed Mix Tank Manufacturer: Alloy Fabricators Capacity: 2,200 gallons Year: 2000 Internal pressure: 15 psi @ 120°F Jacket pressure: 85 psi @ 120°F Dimensio...

ALLOY FABRICATORS 1,000 GALLON

• Manufacturer: Alloy

Used Approximately 1,000 Gallons Stainless Steel Reactor with Coils Manufacturer: Alloy Fabricators Capacity: 1,000 gallons Internal pressure: 33 psi @ 335°F Material of construction: 304 stainless steel Dimensio...

PACKO 100 Litre

• Manufacturer: Packo

Used Packo approximately 100 litre stainless steel vertical reactor. Unit measures approximately 460mm diameter x 580mm straight side. Unit has welded dished bottom and welded dished top. Internal rated 5.5 bar m...

SK MFG WV-50KG

• Manufacturer: SK MFG

Used Approximately 13 Gallon Stainless Steel Reactor Capacity: 13 gallons Manufacturer: SK Model: WV-50KG Internal pressure: 45/FV @ 250°F (3 bar @ 123°C) Jacket pressure: 60FV @ 300°F (4 bar @ 150°C) Bottom driv...

PSV 4000 Litre

• Manufacturer: PSV

Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures ap...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221216

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact, and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by a...

Classifier 762 mm (30 in) Stainless Steel 304 - IPP# 207942

• Manufacturer: Sweco

lined Turbo-Screen Classifier For scalping or dedusting on screens as fine as 20 microns Suction feed through 6" inlet Undersize particles are passed through the screen then are precipitated from the conveying ai...

Stainless Steel 316 Steris Finn-Aqua 3000-G Still - IPP# 230720

• Manufacturer: Finn

4700 lbs/hr Pure Steam Generator Falling film design to remove pyrogenic material Steam heated. Electricals rated 3.0 kW, 480 volt, 60 cyc, 5.2 amp with 0.5 kW 120 volt 4.2 amp, 60 cyc controls. All product surfa...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 203934

• Manufacturer: Heinkel

inverting filter centrifuge Rated 1150 RPM Solid Haynes Hastelloy C22 for all process parts 316SS for balance of exterior parts Clean in place nozzles for solids and filtrate housings Polished to 180 grit and ele...

AL-6XN Chema Balke Dürr GmbH Batch-Type Agitated Reactor - IPP# 235800

• Manufacturer: Dürr

1.4529 SS (AL-6XN super-Austenitic SS) fermenter/ reactor with internal cooling coil and sparge ring for gas addition Polished stainless steel interior motor : 3/50/380 volt Bergmann double mechanical seal on sha...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216002

• Manufacturer: Trane

CentraVac Low temperture, Series R chiller Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Co...

Stainless Steel 316 Centrifuge-Lab - IPP# 239309

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Major Items Plastic Stainless Steel 316 - IPP# 205767

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...