Used continuous furnace in Minnesota, USA

CI Hayes “Tube” Furnace

• Manufacturer: C.I. Hayes

Manufactured by CI Hayes this is a High Temp. “moly” Wire Wound Tube Furnace, Model MY-0002.528 (MY-10). Price Includes A Multiple Tray Loader

Atmosphere Mesh Belt Furnace

• Manufacturer: C.I. Hayes

Specifications CI Hayes Mesh Belt Brazing/Sintering Furnace. Working dimensions of 5" over belt, 12' wide X 120' of heated length. Electrically heated 230/3/60, operating temperature of 2100F. Model LAC. Temperat...

Seco Warwick Rotary Hearth Furnace 96″ Diameter

• Manufacturer: Seco Warwick

Description. Standard “Rotary Hearth” furnace with air operated vertical lift door, fiber insulation, metallic heating elements, roof mounted circulating furnace, flame curtain and SiC hearth plates. Furnace has ...

Atmosphere Roller Hearth Furnace

• Manufacturer: Wellman

Specifications Manufactured by Wellman in 1982. Model #AL-81-180 RH, S/N 180. Working dimensions of 60” Wide x 42’ Long x 14” High – 4800#/HR. Electric – 480/3/60 – 469 KW (over (4) Zones of Control). Operating t...

AFC 500 Lbs/Hr Mesh Belt Furnace Line

AFC 500lb/hr, Natural Gas fired Continuous Belt Furnace Line. Currently configured in a straight line, sits on level floor with no pits. Includes Loading system, prewash, hardener, quench system, post wash, tempe...

1,000 lb/hr Holcroft Mesh Belt Hardening Furnace

• Manufacturer: Holcroft

Built by Holcroft this a mesh belt, gas fired hardening line which includes a high heat furnace, oil quench, parts washer, mesh belt temper and loading system; - Built in 1980, the furnace was retrofitted in 2016...

Atmosphere Mesh Belt Furnace

• Manufacturer: CI Hayes

Specifications Combustible atmosphere system with N2 purge Inconel muffle with internal hearth plates Nichrome ribbon elements, 6 each Power: Furnace 18kW, Contactor Power Switching, Wired 240/3/60. AD150 15kw, C...

Rotary Hearth Furnace, Work Area 18″W x 9″H Opening x 50″ Diameter Hearth

• Manufacturer: Lindberg

Manufactured by Lindberg this is a Rotary Hearth Furnace Model HD-18509-AR. Serial number 77889, Reference #70194. Electrically heated, maximum operating temperature 1600F. Voltage 240/3/60/72 kW. Work Area: 18″W...

Pusher Tunnel Kiln

• Manufacturer: A. J. Carsten

Specifications Manufactured In 1982 Opening over the hearth height: 5″ | Work width: 12″ | Preheat section: 12″ | High heat section: 54″ | Max.operating temp.: 1500 deg.C | Insulation: High Alumina | Power: 80 KW...

Cast Link Belt Lines (3 Available)

• Manufacturer: Correa

This is a complete heat treat department of which the main feature are 3 Cast Link belt lines, each capable of 6,000 pounds/hour. Also included are 3 endothermic generators, spare parts, fire suppression system-i...

Can Eng 1500 Pound Per Hour Mesh Belt Line

• Manufacturer: CAN-ENG

Can Eng Mesh Belt furnace line consisting of a Metro loading system, prewash (dunk/spray), hardening furnace, oil quench, post wash, mesh belt temper furnace and vibratory discharge. Approximately 6-8” clearance...

Can Eng 3500 Pound/Hour Mesh Belt Line

• Manufacturer: CAN-ENG

Manufactured by Can Eng of Niagara Falls, Canada this is a gas fired mesh belt furnace line with a rated capacity of 3500 pounds per hour. Manufactured in 2002. - Belt Width 48” - High heat furnace is capable of ...

Mesh Belt Austemper Line Available-650 Pounds/Hour

• Manufacturer: AFC

Manufactured by AFC-Holcroft of Wixom, Michigan, USA this is a gas fired, mesh belt austemper line with a capacity of 650 pounds per hour (300Kg). This a complete line with automated loading system, high heat fu...

Mesh Belt Austemper Line Available-330 Pounds/Hour

• Manufacturer: AFC

Manufactured by AFC-Holcroft at their MATTSA licensed facility this is a gas fired mesh belt austemper line with a capacity of 150kg/hour (330 pounds per hour). This a complete line with automated loading system,...